What is a good choice are blades made up of carbide steel. These are the perfect choice for cutting thin plastic and PVC pipe. You should remember that different blades have different teeth thicknesses and this affects their performance in terms of cutting through PVC pipe or tubes.
The main reason that you may not want to use a circular saw for cutting PVC is that PVC pipes are very soft. I’m going to show you all the details about how you can cut PVC pipes or tubes with a circular saw and what saw blade you should use. The reason is that, as I mentioned before, PVC pipe and tubes are very soft and they can easily get damaged if you try to cut them with a circular saw.
Here’s how to cut PVC pipe with a circular saw. While PVC pipes can be cut using various tools, the article guides you through cutting PVC pipes with a circular saw. After you have successfully clamped the PVC pipe securely using a vice tool or any work handle, the next step is to mark the PVC pipe where you want to cut.
I didn’t see your post yet when I went, cabinetman, but I got a 18T blade and it seems to be working nicely, much smoother cuts than I was getting with that tile blade. It would probably be smoothest with a blade like you suggested with around 40 teeth to avoid melting but still have a fine pitch. The hunter’s advice led me in the right direction at least, as I probably would have gone for the smallest pitch toothed blade I could find.
Using the big PVC manual cutting toolwith a blade is a lot of work and the cuts are never flat. I cut PVC on my table saw all the time, using a combo blade. I’ve cut PVC with just a cut off saw blade for cutting metal.
what circular saw blade to use for pvc Related Question:
What saw blade is best for cutting PVC?
For cutting PVC pipe, use a combination wood/metal blade with a 10/14 TPI configuration. There is no specialty PVC sawzall blade, nor is one necessary.
Will a wood blade cut PVC?
A power miter saw is ideal when you need to cut large quantities of PVC pipe. Power miter saws are however, expensive. If you already own one, or have access to one and you know how to safely use it, you can use the existing wood blade to cut PVC pipe without buying a special blade.
What kind of saw blade Do I need to cut plastic?
The three best types of saws for cutting thick plastic are a fine-toothed saw, a jigsaw, and a table saw. A fine-toothed saw works best for precision plastic cutting. If you need to make multiple non-linear cuts, this saw will serve you best. Fine-toothed saws also yield the smoothest cut.
Is it okay to cut PVC with a circular saw?
Circular saws can easily cut PVC provided that it is mounted with the right blade. However, it should be kept in mind that cutting PVC with a circular saw is a lot different than cutting wood. Just as I mentioned in the above paragraph, your circular saw can easily cut through PVC pipes without any issue.
How do you cut a PVC with a circular saw?
Once clamped, make sure that the blade of the saw is lined up with the mark on your PVC pipe(s) and then activate the saw blade and drop the saw slowly down onto the pipe, until all the way cut. Once all the way through, release the button and stop the blade before lifting the saw head back up.
How do you cut PVC trim?
You can cut PVC products with the same power tools that you use for wood. But use only carbide-tipped saw blades; plain steel ones dull quickly. In general, the more teeth a blade has, the smoother the cut edges will be. Combination saw blades work well.
Does cutting PVC dull saw blade?
Absolutely not!! Go for it, but hang on tight to the pipe, it has a tenancy to roll in a chop saw. Also watch out for flying pieces, especially when making small cuts (eg <2" off the end) as the blade can send the offcut a pretty good distance.
How do you cut PVC pipe without a cutter?
Wrap the cotton string halfway around your PVC pipe, and teeter-totter the ends back and forth in a sawing motion. The friction of the cotton string against the PVC pipe will cut right through it. You can also loop a piece of butcher’s twine, or kite string, all the way around the PVC pipe.
How do you cut thick hard plastic?
To cut thick plastic, you’ll need a fine-toothed saw, jigsaw, or table saw, since plastic can be tough to cut through. Start by clamping it to a workbench or holding it firmly so it doesn’t move. Then, use a fine-toothed saw to make the cut. Use the full length of the blade and move the saw in quick, smooth motions.
How do you cut plastic without cracking it?
Using a Hand Saw The important thing is to use a fine-toothed blade. You can use a hacksaw, hand jigsaw, or fine-toothed saw. Although it will take some work and muscle power, a hand saw is perhaps the best way to get a clean cut without breaking, snapping, or melting your plastic.
How do you cut plastic cleanly?
You can use a hacksaw, fine-toothed saw, circular saw, or jigsaw to cut plastic. If you use a hacksaw or circular saw, you’ll also need a plastic cutting blade. Avoid using saws or blades with large teeth because they will chip or break the plastic and create rough edges.
What is the best way to fasten PVC trim?
Fastening your PVC Trim Boards When selecting your fasteners, stainless steel screws are the best options because they will never rust and prevent the board from bleeding if the PVC board is unpainted. Stainless steel screws with small finish heads are the best choice for your house trim exterior.
How do you cut PVC trim with a miter saw?
Set the miter saw on a work table so it is steady and does not sway or rock. Install a carbide-tipped blade on the saw. Line up the blade to the correct angle so the proper cut can be made. Slide the trim along the fence of the saw and move the blade down so it touches the line it is going to cut.
How do you seal PVC trim edges?
Sealing Exposed Edges Though PVC is considered impervious to moisture, this is not always true. Cut edges can expose open cells that will hold moisture and lead to mildew and algae growth. To avoid this, seal all cut edges by sanding them with 320-grit sandpaper, then wiping the edges with acetone.
What do you cut PVC with?
Using a hand saw is the most common way of cutting a PVC pipe because the tool essentially does all of the work for you. Like the plastic pipe cutter, hand saws are relatively inexpensive to buy. You can use nearly any kind of saw, but a hacksaw is best, as it affords much more flexibility.
