So we’ve summoned all of our wisdom and powers of brevity to bring you this useful guide to choosing the right circular saw blade. Choosing the right circular saw blade for rip cuts might be even more important. We hope this article about choosing the right circular saw blade cuts through the confusion so you can select the best accessory for the job.
If you want to know which blade to use for a specific project or are just looking for an overview of the types of blades that exist, here we have all the information you need about circular saw blade types. One of the most obvious features of any circular saw blade that will be immediately recognizable even to someone who has never used a circular saw in their life is the number of teeth. They are a good choice if you need one blade for a variety of uses, but if you need a blade for a more specific job, you’re better off buying a specialist blade for that application.
Blade Types:Generally speaking there are four major categories of circular saw blades. Combination saw blades are designed to cut both rips and crosscuts and are the most common type of circular saw blades. Unless you have two circular saw blades available at all times, it would be more than a nuisance to switch from a rip to a crosscut blade every time you change the cutting direction.
Woodworking saw blades are round circular saw blades that are designed to cut various types of wood, including lumber, plywood, softwood, hardwood, panels and laminates. They can be used in various applications, depending on the type of wood you are cutting and the kind of task you are performing. Blades come in a variety of sizes and can be made of various materials to accommodate different uses.
what circular saw blades to use Related Question:
What blade should I use in circular saw?
For most construction work, a 24-tooth general use blade is sufficient. That blade is very aggressive and will help you rip and cross-cut lumber and sheet goods quickly and with a high degree of accuracy. With a 24-tooth demo blade, you’re getting work done quickly, but you won’t get a near-finished edge.
Is more teeth on a circular saw blade better?
The number of teeth on the blade helps determine the speed, type and finish of the cut. Blades with fewer teeth cut faster, but those with more teeth create a finer finish.
What is the most popular circular saw blade?
Freud is a recognized industry leader, and Freud’s 40-Tooth Diablo blade, which offers unrivaled quality and fast, clean cutting, is a top general-purpose circular saw blade. The IRWIN Tools Marathon blade is a quality budget choice, ideal for a variety of yard and remodeling jobs.
Can I use a 7 inch blade in a 7 & a quarter inch circular saw?
The only fine-tooth blade you have lying around is a 7 ¼ inch size. The short answer to the above questions is that you can generally use a smaller blade in a circular saw – within reason. Of course, there will be some drawbacks and changes in performance, especially when you size down by a significant margin.
What size circular saw will cut a 4×4?
Cutting a 4×4 with a Circular Saw – Guide If you need to cut a 4×4 post, then the ideal tool is a large 12” miter saw. This saw has the blade diameter needed to chop through a 4×4 in a single pass, so if this is an option for you it’s the way to go.
What are the 3 basic types of circular saw blades?
They are: Rip Blades, Crosscut, Combination and Specialty blades. Ripping saw blades are designed primarily to achieve a smooth, clean and safe cut when ripping wood or cutting in the same direction as the wood grain.
Can I put a metal cutting blade on my circular saw?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.
What is a 60 tooth saw blade used for?
A crosscut blade, on the other hand, is designed to produce a smooth cut across the grain of the wood, without splintering or tearing. This type of blade will usually have 60 to 80 teeth, and the higher tooth count means that each tooth has to remove less material.
What is a 140 tooth saw blade used for?
OVERVIEW. The CRAFTSMAN 7-1/4-in 140-tooth carbon circular saw blade is made for cutting plywood, OSB and plastic. With a fully hardened and fully flattened plate, along with 140 precision-ground teeth, this blade delivers precise cuts without chips or splinters in the wood or cracks in vinyl and plastic materials.
Are Dewalt circular saw blades good?
Dewalt Circular Saw Blade Despite the lower price tag, it offers great performance to the user for a high value for money thanks to its 7 ¼ inch blade size rating. As for the teeth count, you get a total of 60 teeth that is much higher than even some of the more expensive options out there.
Which saw blades make the smoothest cut?
With fewer spaces between the teeth, crosscut blades remove less material, resulting in a smoother cut. It also means it takes these blades longer to move through wood. Crosscut blades are the go-to choice for finish carpentry and other applications that require precision and a smooth finish.
What kind of saw do you use to cut butcher block?
Since this is a longer cut, you can use a straight piece of dimensional lumber as your guide. Clamp each end of the guide to your butcher block and use your circular saw to make the cut.
Can I use a bigger blade on my circular saw?
Can I use larger blades? Short answer: No. Long answer: You should only ever use larger circular saw blades, when the difference is fairly negligible (1 mm / 1/16″). The reason for that is that for safety reasons most saws are built to tight tolerances.
What do the numbers on a circular saw blade mean?
The Number of Teeth: TLDR; More teeth: Smoother, finer cut. Fewer teeth: Faster, rougher cut. The correct number of teeth is important to ensure that you achieve a smooth cut with optimal chip removal and as little friction possible whilst sawing.
What is a finishing saw blade used for?
Finishing Blades have a lot more teeth on them compared to framing Blades and are designed to make smoother cuts eliminating chips while cutting the wood and is best suited for finished type materials that will be visible.
