Makita 5104 14 Amp 10-1/4-Inch Circular Saw This large cutting capacity sidewinder can reach depths of 3 ¾ inches at 90 degrees, which allows users to easily cut into some timbers. At 45 degrees, the Makita 5104 has a cutting capacity of 2 ¾ inches.
One of the most common questions about a circular saw is how deep it can cut. What follows are the most common size of circular saw blades and their normal depth of cut at a 90-degree angle as well as a 45-degree angle. Obviously, a 90-degree cut provides the maximum cut capacity while the 45-degree bevel will limit the thickness you cut through.
A circular saw is a powerful cutting saw, which operates in rotary motion with a spinning blade mounted inside. First, do not set the blade too deep as the circular saw will work more roughly and robustly. To sum up, a standard circular saw can offer a cutting depth of 2.5 inches as the maximum, but you can adjust the depth to match your requirements.
what circular saw has the deepest cut Related Question:
How deep of a cut can you make with a circular saw?
To sum up, a standard circular saw can offer a cutting depth of 2.5 inches as the maximum, but you can adjust the depth to match your requirements. It’s easy by moving the blade up and down to align against the material before starting to cut.
How deep will a 165mm circular saw cut?
Bore size: 30mm. Blade diameter: 165mm. Maximum cutting depth: 0°: 57mm, 45° Bevel: 40mm.
How deep can a 6.5 circular saw cut?
The 6.5 will cut up to 2 1/16”, while the 7 ¼” cuts up to 2 ⅜”. Minor sure, but it’s when you tilt them into 45 degree angles, that the 7 ¼” can do something the 6.5 can’t. Cut through a 2×4.
How deep can a 10 circular saw cut?
Makita 5104 14 Amp 10-1/4-Inch Circular Saw This large cutting capacity sidewinder can reach depths of 3 ¾ inches at 90 degrees, which allows users to easily cut into some timbers.
How deep can a 7.5 circular saw cut?
Standard-size saws use 7 1/4-inch blades and can cut a maximum depth of about 2 1/2 inches.
How deep can a 6 1 2 inch circular saw cut?
The 18V Brushless Lithium Ion 6-1/2 Inch Deep Cut Circular Saw (C18DBALQ4) is a revolutionary cordless circular saw utilizing a 6-1/2″ blade which allows a 2-19/32″ cutting depth, making it one of the deepest cutting cordless circular saws on the market. This circular saw has a similar cut capacity as a 7-1/4″ saw!
How deep can a 6 1 2 circular saw cut?
Depth. A 6 ½ circular saw can cut materials up to 2.5 inches. It’s perfect for cutting small materials for a small DIY project.
Will a 4.5 inch circular saw cut a 2×4?
The new WORXSAW Compact Circular Saw is capable of cutting a 2×4 in a single pass. The compact circular saw features a 4-1/2 in. blade that is up to 50 percent lighter than a full-size 7-1/4 in.
How deep can a 4 1/2 inch circular saw cut?
The thinner and lighter blade means more efficient performance out of the 5 amp motor that is capable of 3500 RPM under no load. A left handed blade design improves cut line visibility while the user can expect a bevel capacity of 0 – 45 degrees. The max cutting depth is 1-11/16″ at 90 degrees and 1-1/8″ at 45 degrees.
Can a 6 1 2 inch circular saw cut a 2×4?
Circular Saw Features The larger the blade, the deeper the cut. The most common blade diameter is 7-1/4 inches. Most saws with blade capacities of 6 inches or more can cut through 2-inch dimensional lumber at a 45-degree angle in a single pass.
How deep can a 235mm circular saw cut?
Specifications. Maximum Cut Depth @ 90 Deg. Maximum Cut Depth @ 45 Deg.
What is the largest circular saw made?
The Makita 16-5/16 in. Circular Saw is powered by a 15 AMP motor with 2,300 RPM, and has a large cutting capacity to handle beams, timber, and large pressure treated lumber. It will cut 6x material at 90 degrees and 4x material at 45 degrees in a single pass.
Can I use a 7 inch blade in a 7 & a quarter inch circular saw?
The only fine-tooth blade you have lying around is a 7 ¼ inch size. The short answer to the above questions is that you can generally use a smaller blade in a circular saw – within reason. Of course, there will be some drawbacks and changes in performance, especially when you size down by a significant margin.
How thick can a 10-inch saw cut?
A saw with a 10-inch blade makes right-angle cuts across a board 5 1/2 inches wide, sufficient for two-by-six lumber. The same 10-inch saw will cut a two-by-four at a 45-degree angle. Manufacturers also make 12-inch versions, which have a maximum cut of about 7 1/2 inches, wide enough for two-by-eights.
How deep can a 10-inch blade cut?
The vast majority of table saws use a 10-inch circular blade that can cut up to 3.5 inches deep. There are some other table saws that use a 12-inch blade, which can cut up to 4 inches deep.
