A circular saw blade is a special type of blade that works well with circular saws and is particularly designed to cut through different materials with ease. The circular saw blade is reinforced and strengthened to provide the smooth and optimum performance that you experience from your circular saw, and once the blade inside your saw becomes warped or worn out, you can replace it with a similar one to ensure that you keep getting clean and precise cuts every time you use it. Most of the other blades often get overheated and warped, but this isn’t something you experience with the circular saw blade.
The title of best circular saw blade for the money goes to another Freud Diablo product: the D0724P. This 7¼-inch blade sells in a pack of two, letting you handle a big project load before you have to shop for another. The best way to start shopping is to familiarize yourself with all the different varieties of circular saw blade. Coating: Circular saw blades are often coated with rust inhibitors and other protective layers.
You may buy the most expensive circular saw out there, but ultimately, the quality of your cuts will only be as good as your blades are. Freud Diablo DO748F Circular Saw Blade – Best for metals OVERVIEW. The steel demon blade is intended for thinner metals that are often used in a home workshop. The Freud D0740A Diablo Finishing Saw Blade represents the best circular saw blade of this review.
While the saw is ideal for those purposes, you can also use it to make furniture-grade cuts in wood, cut steel or aluminum, reduce unwieldly sheets of plywood to more manageable sizes, and do heavy demolition cuts through lumber that has nails in it. These blades are rated for steel plate, pipe and conduit, and shapes such as L, U, and squares; some blades are also designed for cutting the same shapes in aluminum, and a few blades are even rated for making the cut in stainless steel, a notoriously difficult material to cut. Not all metal-cutting circular saw blades will cut thin sheet materials such a roofing and metal trim.
what circular saw blade is best Related Question:
What is the best type of circular saw blade?
Mostly, a 24-tooth circular saw blade is preferred by many people, especially if you have to cross-cut lumber and sheet materials. The 24-tooth blade is good enough for you if the diameter is 7¼”. However, as the diameter increases, you should also consider looking for circular saw blades with more teeth.
Is more teeth on a circular saw blade better?
The number of teeth on the blade helps determine the speed, type and finish of the cut. Blades with fewer teeth cut faster, but those with more teeth create a finer finish.
How many teeth should my circular saw blade have?
A 40-tooth blade works fine for most cuts through plywood. Blades with 60 or 80 teeth should be used on veneered plywood and melamine, where the thin veneers are likely to blow out on the underside of the cut, a characteristic known as tearout. MDF requires even more teeth (90 to 120) to get the cleanest cut.
Which saw blade makes the smoothest cut?
The 44-tooth blade (left) makes a smooth cut and is used for trim carpentry and cabinet making. The coarse 24-tooth blade (right) cuts quicker and is used for rough carpentry work.
What are the 3 basic types of circular saw blades?
They are: Rip Blades, Crosscut, Combination and Specialty blades. Ripping saw blades are designed primarily to achieve a smooth, clean and safe cut when ripping wood or cutting in the same direction as the wood grain.
What is a 60 tooth saw blade used for?
It’s better suited for cutting melamine, chipboard, and plywood. Usually 60 to 80 teeth (on a 10″ blade) with shallower gullets between teeth and a more gentle forward rake around 10°.
Can I put a metal cutting blade on my circular saw?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.
What size blade do I need for my circular saw?
Most circular saws come standard with a 7¼-inch-diameter blade and a motor that draws 8 to 15 amps of power.
What is a 40 tooth saw blade used for?
General Purpose Saw Blade. Diablo’s general purpose blade is ideal for cutting oak, pine, plywood, pressure treated lumber and beams. An excellent choice for table & miter saws, Diablo’s blade leaves a smooth cut in a variety of applications, reducing the need to change blades between tasks.
Can I use a bigger blade on my circular saw?
The answer is generally this is not a great idea. A larger blade will put excess stress on the motor, and may not have enough strength to provide the cutting power at the tooth you need.
Are Diablo blades worth it?
Diablo blades are available in a wide selection of sizes and styles and are easy to find online and locally at Home Depot. The consensus is that Diablo saw blades balance great quality with excellent value, and are a good choice when replacing or upgrading the OEM blades that are often bundled with new saws.
What size circular saw will cut a 4×4?
Cutting a 4×4 with a Circular Saw – Guide If you need to cut a 4×4 post, then the ideal tool is a large 12” miter saw. This saw has the blade diameter needed to chop through a 4×4 in a single pass, so if this is an option for you it’s the way to go.
What is the best blade to use for cutting with the grain of the wood?
If you’re just cutting with the grain, you’ll want to use a rip saw blade. For cutting across the grain only, you’ll want a crosscut saw blade.
Are Diablo and Freud the same?
Freud and Diablo Background The Freud Group is a global supplier of circular-saw blades, router bits, and cutters for enthusiast woodworkers, professional and industrial users. They produce under both the Freud and Diablo brands.
Why use a negative rake saw blade?
If you are pulling the saw head towards you and into the wood, such as on a radial arm or slide compound miter saw, you want a negative rake. It makes the saw less likely to climb up the cut and into your hand or arm.
