To sum up, a standard circular saw can offer a cutting depth of 2.5 inches as the maximum, but you can adjust the depth to match your requirements. It’s easy by moving the blade up and down to align against the material before starting to cut.
One of the most common questions about a circular saw is how deep it can cut. What follows are the most common size of circular saw blades and their normal depth of cut at a 90-degree angle as well as a 45-degree angle. Obviously, a 90-degree cut provides the maximum cut capacity while the 45-degree bevel will limit the thickness you cut through.
This article will teach you the fundamentals of cutting depth and how deep can a circular saw cut. You must adjust the depth of the cut on a circular saw to match the thickness of the board you’re attempting to cut before cutting. Knowing how deep a circular saw can cut is essential.
how deep does a circular saw cut Related Question:
How deep will a 10 circular saw cut?
Makita 5104 14 Amp 10-1/4-Inch Circular Saw This large cutting capacity sidewinder can reach depths of 3 ¾ inches at 90 degrees, which allows users to easily cut into some timbers.
How deep can a 7 1/4-inch circular saw cut?
Circular Saw Sizes Standard-size saws use 7 1/4-inch blades and can cut a maximum depth of about 2 1/2 inches.
How thick can a 5 1 2 circular saw cut?
The blade, located on the left side, cuts up to 1-3/4-inch at 90 degrees and 1-3/16-inch at 45 degrees.
How deep can a 12 inch circular saw cut?
To sum up, a standard circular saw can offer a cutting depth of 2.5 inches as the maximum, but you can adjust the depth to match your requirements. It’s easy by moving the blade up and down to align against the material before starting to cut.
Can a circular saw cut a 4×4?
Circular Saw. A circular saw is one of the best means of cutting a 4×4 post. Most people own a circular saw, its portability makes it easy to cut 4x4s from the ground, and they can make precision cuts by using a relatively simple trick.
How deep can a 6.5 inch circular saw cut?
The 6.5 will cut up to 2 1/16”, while the 7 ¼” cuts up to 2 ⅜”. Minor sure, but it’s when you tilt them into 45 degree angles, that the 7 ¼” can do something the 6.5 can’t. Cut through a 2×4.
How deep can a 4 1/2 inch circular saw cut?
The max cutting depth is 1-11/16″ at 90 degrees and 1-1/8″ at 45 degrees. The saw also features a depth of cut adjustment lever and a 1-1/4″ vacuum adapter.
How deep can a 6 1 2 inch circular saw cut?
The 18V Brushless Lithium Ion 6-1/2 Inch Deep Cut Circular Saw (C18DBALQ4) is a revolutionary cordless circular saw utilizing a 6-1/2″ blade which allows a 2-19/32″ cutting depth, making it one of the deepest cutting cordless circular saws on the market. This circular saw has a similar cut capacity as a 7-1/4″ saw!
Will a 4.5 inch circular saw cut a 2×4?
The new WORXSAW Compact Circular Saw is capable of cutting a 2×4 in a single pass. The compact circular saw features a 4-1/2 in. blade that is up to 50 percent lighter than a full-size 7-1/4 in.
Can a 6 1 2 inch circular saw cut a 2×4?
Circular Saw Features The larger the blade, the deeper the cut. The most common blade diameter is 7-1/4 inches. Most saws with blade capacities of 6 inches or more can cut through 2-inch dimensional lumber at a 45-degree angle in a single pass.
Will a 7 1 4 circular saw cut a 4×4?
Standard circular saws with 7 ¼” blades can only cut 2 ½” deep, so making the cut in a single pass isn’t possible. That means you’ll need to make multiple passes to cut clean through the 4×4, and this can result in a poor finish unless you take steps to ensure your cuts line up perfectly with each other.
Will a 5.5 circular saw cut a 2X4?
Yes! A 5.5 inch circular saw blade is perfect for cutting a 2X4. The blade capacity is deep enough to make a crosscut in 1 stroke. If you want to make a 45 bevel cut then you will need to make 2 strokes.
How shallow can a circular saw cut?
A circular saw with a 7 and 1/4″ blade can cut wood up a maximum depth (at 90 degrees) of 2.4375″. This means you can use a circular saw to cut a 2×4 board (which is actually 1.5″ thick).
Can I cut a 4×6 with a circular saw?
However, a regular circular saw with a 7 1/4-inch diameter blade will only cut to a depth of 2 1/4 inches. Cutting on all four sides still leaves roughly an inch of uncut wood in the middle of the post. This is alleviated with either a handsaw, or reciprocating saw.
Can a 10 inch blade cut a 4×4?
Ten-inch blades really don’t react well on 4x4s. They go dull much faster, and eventually, you won’t be able to sharpen them enough to make quality cuts in the future.
