Matching the right chain to a chainsaw is easy if you have the right measurements matching the right chain to a chainsaw is a little more complicated than finding other power tool accessories, because of the unique way that chainsaw chains are measured. After matching the right size of chain there is still a host of chainsaw chain types and features to choose from and match to the application, but that’s usually much more straight-forward than finding measurements. Page is also a great way to get more familiar with chain sizes and types, even if there’s still some time before your next chainsaw chain replacement.
The numbers stamped on a chainsaw chain are an ID code used by the manufacturer to indicate the pitch and gauge measurements of the chain. If you can’t find the chain numbers or are having trouble reading them, there are two other ways you can measure your chain. A chain’s drive links are the part of the chain that slide around the bar groove, allowing the chain to cling to the body of the chainsaw.
I believe that any chain you buy at the big box stores will be safety chain. You can’t really bore cut with it, it cuts really slow & after a number of sharpenings, it is really difficult to get the rakers filed down. Do a search for baileysonline or Amicks & order a few chains from them.
In order to switch the saws over to a common chain size, they have to be able to effectively pull the chain. Lastly, the chain gauge must be the same for all chains and bars. Generally smaller saws are better with.325″ chain, while larger saws are better with 3/8″ chain.
Typically the numbers on a chainsaw chain include pitch, gauge, and drive links. Another important factor that needs to be focused if you want to gather substantial knowledge on a chainsaw chain is the type of cutter of the saw chain. Hopefully, this article helps you understand the numbers on the saw chain and identify the right chain for your chainsaw.
what does dl mean on chainsaw chain Related Question:
What does DL mean on a chain saw chain?
The drive link count is the last 3 numbers before the G on the chain part number. example 72LGX072G = 72 Drive Links 72LGX070G = 70 Drive Link count.
Do number of drive links matter on chainsaw?
For heavier jobs like felling trees or bucking logs, it might be better to have a longer chain with more links – but this will make it slower and less agile. Shorter chains can cut branches under two inches much faster than long ones because the short length of the blade doesn’t get caught up in them as much.
How many drive links in a 18 inch chainsaw?
0.050 Gauge 0.325 in. Pitch Chainsaw Chain, 72 Drive Links. This product is only available through retailers or servicing dealers.
How do I know what chainsaw chain to buy?
To determine the pitch (chain size), you’ll need to measure the distance between any three consecutive rivets, then divide the result by 2. The rivets are the small, round pegs/studs that hold the chain segments together. Measure from the first to the third, then divide that number in half to get your chain pitch.
What does pitch and gauge mean on a chainsaw chain?
Pitch and gauge of the chain. * Pitch is the distance measured on center of any three rivets in a row. This distance will most commonly be 1/4″ . 325″ or 3/8″. * Gauge is the width of the groove in the bar that the chain rides in.
What is the difference between .325 and 3/8 chain?
The . 325 may be smaller and faster, but it may not be your best bet for your everyday needs. The three-eighths-inch chain is durable and lasts longer than its smaller cousin. This makes it one of the more popular switches for chainsaw users who want to get more out of their saw.
How many links does a 14 chainsaw have?
Oregon S52 AdvanceCut Chainsaw Chain for 14-Inch Bar -52 Drive Links – low-kickback chain fits Dolmar, Ryobi, Echo and more.
What is Saw Chain pitch?
Pitch. Chain pitch is the size of the chain and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches – 1/4″ is the smallest, 3/8″ is the most popular, and 3/4” is the largest.
When should I replace my chainsaw chain?
Once the wear markers have been met it’s essential to replace the chainsaw chain. Filing past the wear marker will greatly reduce the chain’s cutting performance, and increases the risk of the tooth breaking off. Ideally you should reach the tooth and depth gauge markers at roughly about the same time.
Will a Husqvarna chain fit a Stihl?
If we’re not mistaken, the first time Husqvarna chains were used on Stihl saws was in 1995. As a general answer, Husqvarna chains can go on a Stihl chainsaw. Though they can fit onto the Stihl chainsaw perfectly, these two chainsaw brands use different standard pitch sizes.
Will a 3/8 chain fit a .325 bar?
You can replace a 3/8 Oregon PowerMatch nose with a . 325 PowerMatch nose on any length of Oregon PowerMatch bar you want. Then when you use up the . 325 chain just put the 3/8 nose and rim sprocket back on.
Are all chainsaw depth gauges the same?
A: When depth gauges are uneven, each cutter tooth on the chain takes a different sized bite. This causes the chain to cut rough and vibrate. If the depth gauges are higher on one side than the other, this causes the chain to cut crooked. The cut will pull in the direction of the side that has the lower depth gauges.
What size chain does a Husqvarna 450 take?
0.325 inch pitch chain with a . 050 inch gauge.
What chainsaw pitch is best?
Experts say the best chainsaw chain for cutting firewood is the Husqvarna High Performance 18 inches, 0.05 gauge, 0.325 pitch chain.
What angle do you sharpen a chainsaw?
Always file at right angles to the guide rail. The right sharpening angle depends on the saw chain and the wood that you want to cut. The sharpening angle will generally be between 25° and 35° – the harder the wood, the greater the angle.