If Poulan bar and chain oil is not available, use another brand of bar and chain oil. The oil retained on the chain protects the bar and chain from overheating caused by friction. If the chain brake is disengaged and the chain does not turn; turn off the saw, then check the drive links on the chain, the bar groove and the sprocket nose on the bar.
All gas-powered chainsaws need gas mixed with oil in order to work correctly. Mixed gas refers to combining the gas that some chainsaws use with oil. Only the gas-operated chainsaws take mixed gas, because they are the only ones actually running on gas.
Only mix enough fuel to last you one to three days at a time; this limit keeps the fuel fresh and minimizes the risk of any buildup. If you find mixing to be too time-consuming or annoying, Stihl does offer customers other options to run their chainsaws, such as Stihl MotoMix, a pre-mixed, high-performance fuel that is ready to use straight away, eliminating the need for measuring, shaking and storing. Whether you purchase a pre-mixed fuel or mix your own, following the correct ratio can keep your chainsaw working properly and keep it working for years.
Before I show you how to mix chainsaw fuel, I wanted to make you aware that I have several chainsaw buying guides to help you find the perfect tool for your needs. Additional Tips on Mixing Chainsaw Gas.Never mix gas and oil in the tank of the chainsaw. I hope you enjoyed this post on how to mix chainsaw gas.
The larger number represents the amount of gasoline, while the smaller is the amount of oil needed. If you are treating 1 gallon of clean unleaded gasoline, a 50:1 ration translates to 2.5 ounces of two-cycle oil, while preparing a 40:1 blend calls for 3 ounces of oil. It’s best to use the premixed gas within a few days and to shake it well anytime it’s been sitting for a while to redistribute the oil completely into the gas.
what fuel does chainsaw use Related Question:
Can you use regular gas in a chainsaw?
A chainsaw uses regular unleaded gas but it needs to be mixed with the right oil. Most chainsaws use pre-mixed gasoline-oil. Oil is mixed in with the gas to lubricate the engine and prevent fouling.
What is the petrol mix for a chainsaw?
Chainsaw oil mix ratios explained Say your chainsaw manufacturer recommends a 50:1 fuel/oil mix. This simply means you need 50 parts of gas to one part two-stroke oil.
What kind of gas do chainsaws use?
Unleaded gasoline with a minimum octane rating of 89 is recommended. A lower octane can cause some issues, such as increased engine temperature, increased piston seizures, and engine damage. Stihl offers 2-cycle oils made especially for Stihl chainsaws. Premium quality 2-cycle fuels provide protection for your engine.
What is the oil ratio for a 2-stroke chainsaw?
Use a 32:1 gasoline to oil ratio. One gallon of gasoline combined with 4 oz of two-cycle engine oil.
Can I use 87 octane in my chainsaw?
To start, both Stihl and Husqvarna recommend the use of high octane unleaded gasoline. Both brands of pro saws are designed to burn fuel rated at 89 octane or higher. Most regular grade fuel has an octane rating of about 87.
Can I use chainsaw without oil?
Without lubricant, the speed at which the chain moves over the chainsaw bar can cause some serious friction. A slowed-down chain and excessive fuel burning mean there’s a lot of friction between your bar and chain, which means a lot of heat is being produced that could do major damage to your saw.
Can I use 2-stroke oil for chainsaw?
Modern two stroke chainsaws do not require generic brand oils to operate at temperatures and rpms that are comparable to those of generic brand oils. Our recommendation is to use only high quality two stroke oil designed for air cooled high performance engines when using your modern two-cycle engine.
Can I use 2-stroke oil for chainsaw bar oil?
Can You Use 2 Cycle Oil As Bar Oil? You should only use two-cycle oil as the mix, never as a chainsaw bar oil alternative. Using two-cycle oil on the bar will not provide enough tackiness to stick to the chainsaw chain in the summer months. Two-cycle oil also will not work in the winter.
Can you use car oil in a chainsaw?
Some people caution against using motor oil on a chain saw, but not for safety reasons or concerns about equipment. Bar and chain oil is stickier than regular motor oil, so it stays on the chain longer.
Do you mix gas and oil for chainsaw?
Most STIHL gasoline-powered equipment runs on a 50:1 mixture of gasoline and 2-cycle engine oil. Knowing the proper way to mix your fuel is the first step in keeping it running strong and long.
What is special about 2 stroke oil?
A 2-stroke oil will lubricate the engine components by association with the fuel (either by mixing with it or by spraying during combustion), so this oil contains components that promote its combustion.
Can I run 93 octane in my STIHL chainsaw?
STIHL recommends that customers use a minimum of 89 octane fuel. If a customer chooses to use a 91 or 93 octane fuel, no damage to the engine will result. However, using an 87 octane fuel could lead to serious engine damage.
Can you use avgas in a chainsaw?
Switched to AVGAS 100 a year + ago and the lawn mower and chainsaw love it! No more starting problems and they run with full power. Just a few pennies more per gallon and its worth it, by a whole bunch, not to have engine problems.
Can I use WD40 as chainsaw oil?
No. You should never use WD40 as chain lubricant since WD-40 is NOT a true lubricant. WD40 is primarily a solvent or rust dissolver.
Can you use 10w40 in a chainsaw?
You can but it’s not very good for the chain or the environment. The Husqvarna / Stihl stuff is much thicker and vegetable based so it doesn’t fling off the chain as easily or poison your garden! 10w30. Thicker.