Make the plunge cut first, so the the tip can be kept in clean wood, with no chance of biting into an open kerf from an opposing cut, which would try to draw the blade into the “easy cutting area” of the open kerf and jam the bar, resulting in kickback. Just my way but I would make plunge cuts on both sides of the tree because for me it is easier to get a level and even cut behind the hinge and then saw to the back strap. Since the first cut is always on the heavy or most dangerous side of the tree you dont want to cut any more fiber than necessary.
Plunge cut – Starting a cut in the center of a log using the tip of the chain saw blade. The Bore Cut – Trees with backward or forward lean pose some difficulty and generally require the formation of a proper hinge prior to completing the back cut. On these trees it is recommended that the logger use the bore or plunge cut as the first step in making a back cut.
Straight from behind felling cut For small trees, the easiest way to saw the felling cut is straight from behind. Collapse all steps Bore cutting To be able to perform the safe corner method and turn around method you need to master bore cutting. Continue to swing the saw, completing the felling cut and creating a hinge with a uniform thickness and even cut.
what is a chainsaw plunge cut Related Question:
What is the purpose of a plunge cut?
While a circular saw will typically need to start it’s cut from the end of the material, a plunge cut saw will let you start the cut anywhere in the material. This makes it the best tool to use when cutting out worktop for sinks or hobs.
Are plunge cuts safe?
Pushing the saw to hard can bind the chain and stop the motor, if you are unlucky enough it can be wedged into the log and very hard to get back out. a twisting of the saw or the log can break the chain or the bar, neither are safe problems.
What is a plunge cut in wood?
The Plunge Cut is the most difficult of saw cuts with any tool. The Oscillating tool can cut quick clean holes in many materials, and finish off plunge cuts started by other tools in tougher materials.
Can you use a plunge saw without the track?
All of the saws can be used without a track, just like a regular circ saw. But guiding them with a track guarantees dead-straight cuts. All the tracks work similarly: The saw straddles a raised rib that maintains a straight cutting line, and rubber grip strips on the bottom prevent the track from scooting during a cut.
Can you cut with the tip of a chainsaw?
While it’s designed to cut with either the top or bottom of the blade, just about anything that comes in contact with the top half of the end tip of the blade (known as the kickback zone) can change the cutting momentum and cause the saw to slam back against you.
What is the long metal part of the chainsaw that the chain spins around?
The drive link runs within the groove of your chainsaw’s guide bar as the drive sprocket connects with the tang of the links. The drive link makes sure the power from the sprocket reaches the chain, so your chain rotates around the guide bar.
Are track saws safe?
Benefit 6: Painless portability A track saw does most of what a table saw does, but moving between job sites is a lot easier. Safer, too: Carrying a track saw, you’re less likely to bang up door casings or wreck your back.
What is another name for a plunge cut?
For this reason, plunge saws are sometimes called track saws. However, any type of hand-held circular saw with attachments for guide rails can be categorized as a track saw, and this feature can thus also be found on some regular circular saws without the plunge-cut feature.
Can you use a circular saw as a plunge saw?
For the plunge cut, place the portable circular saw on the rear stop. Switch on the saw and slowly lower it into the material. Now saw slowly up to the second stop. When the stop is reached, carefully remove the saw from the material.
What is the best saw for cutting doors?
A circular saw makes a great door cutter. Make sure your saw blade is sharp and has a minimum of 18 teeth. Hold the circular saw against the edge of the door as if you’re ready to cut.
What is a track saw good for?
The track saw is great for ripping boards, cutting trim, and providing splinter-free cuts across panels. The track saw is also excellent when used as a plunge saw because you can set it to a precise depth and it won’t fail you. You have the ultimate in control when working on wood flooring or sub flooring, for example.
Do I really need a track saw?
Conclusion. A track saw is unbeatable when it comes to making long, accurate cuts. It can do most things a table and circular saw can, while being more portable than a table saw and more accurate than a circular saw. It’s also better than a table saw at breaking down large sheets of plywood.
What’s the difference between a track saw and a circular saw?
The critical difference is that a circular saw has a long and rectangular rail in the front, unlike its counterpart. A circular saw performs double cuts as the rip cuts and the crosscut, whereas the track saw three. The circular saw has a protective guard, whereas the track saw has none.
Should you run a chainsaw at full throttle?
Engine Protection Generally, two-stroke chainsaw engines are built to conveniently run at full throttle without an engine breakdown. Therefore, running at any throttle speed below the full throttle is not advised.
How do most chainsaw accidents happen?
The most common hazards associated with chainsaws are injuries caused by kickback, pushback, and pull-in. Kickback is the most common and poses the greatest hazard. Kickback occurs when the rotating chain is stopped suddenly by contact with a more solid area throwing the saw rapidly backward toward the operator.