“Back in the day when I felled, limbed and topped for up to 2 skidders I went thru a tip a week. Bearings burn out quick after pinching the tip when topping especially when running a Stihl 064 with 18” b/c. I like to file my chain right down past the witness marks and when the cutters start to break off. Put a few days on a laminated bar and the rails start to spread and they can’t be reliably retighened.
Laminate bars are the right choice for small saws and occasional use or when weight is critical; solid bars should be preferred for long life and repairability in intensive professional use. Laminate bars can be designed to be lighter than solid bars – usually up to around 30% lighter. Affordable entry-level laminate bars may have a solid core plate and weigh essentially the same as a comparable solid bar.
Until yesterday I didn’t know it was possible to make a solid chainsaw bar, laminated seemed so much more logical. Good quality laminated bars are plenty tough and long lasting. Solid bars CAN be heavy…. I have not measured thickness of bars or weighed them on accurate scales but my Carlton German made 16″ Husky bar “Seems” much heavier than my Tsumura on the same saw and in hand…. Bill.
This post will help you determine which type of chainsaw bar you need. Many chainsaw operators will keep a laminate bar as a backup in case they need it. Carving chainsaw bars are usually shorter in length than other types of bars, with bar lengths ranging from 10″-14″.
what is a laminated chainsaw bar Related Question:
What is a laminate chainsaw bar?
Laminated Chainsaw Bars. Whereas solid bars are made from one solid piece of steel, laminated bars are made by joining two steel rails with a steel core and a sprocket between them. What solid bars offer in sheer strength, laminated bars offer in higher flexibility.
Are Stihl bars laminate?
The standard version of the STIHL ROLLOMATIC® Ematic™ bar consists of three electrically welded metal plates (laminated guide bars). The ROLLOMATIC® E is a general-grade laminated guide bar made of high-grade steel. Consisting of three electrically welded metal plates, it is lightweight, yet provides great stability.
Are Husqvarna bars laminated?
Laminated bars with nose wheel The gentle curve and small nose radius of these chainsaw bars reduces the risk of kickback and facilitates good cutting control. These bars are coated against scratches and corrosion. Husqvarna offers these bars in 3/8″ Mini .
What is the most aggressive chainsaw chain?
404 chains are the most aggressive. The 3/8 is a more flexible size with adequate strength, low weight and substantial cutting speed. It can also can handle the power of a 50-100cc chainsaw engine.
What chainsaw chain cuts the fastest?
A full chisel chain is a chain with square cornered teeth, and they’re known for being the fastest cutting blade shape available. A full chisel chain also has a higher number of teeth than other chain options(full chisel is also known as a standard chisel chain).
Can you put an 18 inch bar on a Stihl ms180?
Stihl recommends that its MS 170, MS 171, MS 180, MS 181, MS 192 and MS 211 homeowner models be equipped with guide bars between 12 and 16 inches. The MS 250 and MS 251 models are equipped with larger 45 cc engines and are capable of driving an 18-inch bar.
Will a Stihl chainsaw bar fit a Husqvarna?
Husqvarna uses as a standard driver width . 058 and Stihl uses . 063, so the Stihl chain won’t fit into the Husqvarna bar groove.
What kind of steel are chainsaw bars made of?
The steel in most chainsaw bars is high-quality steel that will keep an edge well, but has enough flex to bend under stress rather than break or crack. The metal is generally corrosion resistant, and many bars are a stainless-steel alloy.
Why is there a hole in my chainsaw bar?
The hole is part of the manufacturing process when the bar is made at the factory. The milling and heat tempering machines anchor to it and the tail slot. Making a living with a saw since age 16.
Do chainsaw bars make a difference?
Regardless of where they are made, there is a huge difference between the two brands of chain and bars. They use different formulations of steel with different hardness levels. I can tell the difference in the chains just by how they sharpen with a file.
How long should a chainsaw bar be?
The most common chainsaw bar sizes are 12 to 20 inches, but they come in sizes as large as 72 inches, typically for professionals. The longer the bar, the heavier the chainsaw.
What lengths do chainsaw bars come in?
To preface, the standard bar lengths for chainsaws are 16, 18, and 20 inches. However, longer bars do exist and can exceed 24 inches. When taking a measurement, you should round to the nearest even whole number.
Why do Loggers Run chainsaw bars upside down?
Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear.
What chainsaw chains do professional loggers use?
Full-chisel teeth chains are usually used by professionals on large saws. Semi-chisel teeth are rounded, so the risk of kickback is less, and they stay sharper longer. Semi-chisel teeth cut slower but are a better choice in dirty wood than full chisel.
What chainsaws do loggers use?
The most popular brands known to fit this description are the Stihl, Husqvarna, and Oregon chainsaws, which are the most ideal for professional loggers. Bigger chainsaws are better for professional loggers, but they are not always the most ideal. The fact that these chainsaws are big also means that they are heavier.