It is important to inform yourself of the relevant yard safety tips whenever you undertake an outdoor project of any kind, but perhaps never more so than when using chainsaws to fell trees or buck up portions of a tree that has already been felled. Improvements have been made in chainsaw safety, but chainsaws are still dangerous tools that require you to be on constant alert. With your lead arm locked, any kickback that occurs will push your lead arm up and back; the chainsaw bar will not be on a collision course with your body.
Bucking is the process of cutting a felled and delimbed tree into logs. Significant value can be lost by sub-optimal bucking because logs destined for plywood, lumber, and pulp each have their own value and specifications for length, diameter, and defects. Bolts are the pieces of a log which has been bucked into specific lengths which are less than 8 feet, especially short lengths.
Now, in regards to bucking, most professionals will advise you, to utilize a gas chainsaw or an electric chainsaw if it’s a simple bucking around the home…. Apart from the equipment stated above, you would also need a claw bar, splitting maul and fuel…. Ensure You Have a Clear Area. The bucking spikes are the spikes placed right in front of the chainsaw, next to the chainsaw bar. Now, to utilize your chainsaw properly when bucking, you ought to lodge the bucking spikes into the log and allow the chain to pull its way through the log.
CUTTING TECHNIQUE. First make a cut on the compression side ‘ approximately 1/3 of the stem’s diameter. BORING CUT. The boring cut is a valuable technique for bucking logs piled together that cannot be moved. To cut the spring pole, start at the base of the stem and make a series of shallow cuts on the inside of the bend.
what is chainsaw bucking Related Question:
Why do chainsaws buck?
If a log is not sitting firmly on the ground when you cut, the downward force can cause the log to close up on your chain. Pinching of the blade is more likely to occur when you’re cutting from the top down.
What is bucking limbing?
Limbing is the removal of the branches from either standing or downed trees. Bucking is the process of cutting the downed tree into appropriate lengths.
What does it mean to buck up a tree?
“Buck up” can refer to cutting a felled tree and its branches up into shorter lengths. You may use a sawbuck at the end of the operation; at the beginning, simply prop up a long log to be cut on top of other logs.
Can chainsaws kick back?
Kickback is a term used to describe the sudden, upward motion of a chain saw’s guide bar and is one of the most common causes of chain saw accidents. If proper cutting techniques are not followed, the lightning-fast kickback of a chain saw can be very dangerous and may result in serious injury.
Can electric chainsaw cut trees?
Although electric chainsaws are smaller and easier to carry, most lack the power and stamina to cut down large trees. If you have big trees on your property that you want to remove or cut into firewood, a gas model is your best bet. Electric chainsaws come in two types: corded and battery-powered.
Why does a chainsaw kick back?
Kickback is the term to describe the unexpected upward motion of the guide bar. Kickback occurs when the end portion of the nose of the bar (the kickback zone) strikes an object and the chain momentarily snags, or is pinched.
What do you mean by bucking?
1 of a horse or mule : to spring into the air with the back arched. 2 : to charge against something. 3a : to move or react jerkily. b : to refuse assent : balk. 4 : to strive for advancement sometimes without regard to ethical behavior bucking for a promotion.
What is a buck cut?
The process of cutting a tree into usable lengths is called bucking. Bucking often occurs as a tree is being limbed, such as when the limbs of the crown are to be used as firewood.
How old are trees when they stop growing vigorously?
But by the time the tree reaches 90 years of age, its growth has slowed to about half a meter – roughly a foot and a half – a year. By the time the tree is 150 years old, height growth has virtually stopped, even though the tree may live another 100 years.
On which side of a tree should workers stand while limbing or bucking?
Limbing and Bucking must be done on the uphill side of each tree or log, where rolling or sliding of logs may be expected. Precautions, such as moving to a stable position, must be taken to prevent the logs or the butt from striking employees while limbing and bucking trees.
What is skidding a tree?
A skidder is any type of heavy vehicle used in a logging operation for pulling cut trees out of a forest in a process called “skidding”, in which the logs are transported from the cutting site to a landing.
What is a chainsaw used for?
A chainsaw (or chain saw) is a portable gasoline-, electric-, or battery-powered saw that cuts with a set of teeth attached to a rotating chain driven along a guide bar. It is used in activities such as tree felling, limbing, bucking, pruning, cutting firebreaks in wildland fire suppression, and harvesting of firewood.
What chainsaw do loggers use?
Stihl is the most popular chainsaw for professional loggers. It has a long-lasting chain, and you can also enjoy the exceptional cutting speeds available with this brand of chainsaw. Additionally, the chains are high-performance, low vibration, and quiet in their performance.
How does a chainsaw work?
The Components of Chainsaw Most simply put, a chainsaw works by spinning a chain of saw blades, also called “teeth”, around a guide bar quickly to cut through wood in a fast, smooth motion. Sizes of blades/teeth and guide bars can vary greatly between chainsaws.
What should you not do with a chainsaw?
Don’t Cut With Improper Blade Tension A overly loose or tight chain also wears out the drive sprocket and causes rapid chain and bar wear. To determine if your chain is properly tensioned, pull up on the chain. The drive links should still be in the bar groove. If the links come out of the bar, the chain is too loose.