If you’re a professional arborist or a homeowner looking to obtain firewood, this article will help you utilize a chainsaw wedge in your cutting practice from the standpoint of an expert. Wedges are simple, inexpensive tools that aid in tree felling and log bucking when used with a chainsaw. “Felling wedges are quite inexpensive and hence I would recommend you to carry more than with various sizes in your backpack. I would suggest that for a given diameter log, the most appropriate wedge has a length that is about 30-40% of the log’s diameter. For small-diameter trees, you should carry 4″,4.5″ and 5″ wedges. For larger diameters, you should have 7 ½”, 10, and 12″ wedges in your kit.
what is chainsaw wedge Related Question:
What is a cutting wedge?
A wedge cut consists of pairs of holes, usually drilled horizontally, that meet or finish close together at the back of the cut so that a wedge-shaped section of the rock face will be removed on blasting. The holes should be drilled at an angle of approx. 60 degrees to the face line.
Can you use a splitting wedge as a felling wedge?
With a few exceptions, aluminium wedges are suitable for both splitting and felling. The OCHSENKOPF OX 42 aluminium solid wedge is an example of the all-rounder among wedges. In combination with a wood splitting hammer, the universal wedges are used to cut wood into logs.
What is a bucking wedge?
Bucking Wedges – Also known as a summer wedge, bucking wedges are smooth on both sides to allow them to be easily removed from a kerf after use.
What is a tri taper wedge?
$14.99 / EA. STIHL 10″ TRI-TAPER WEDGE. A wedge is almost as essential to tree felling & bucking as a chain. saw. When properly placed, wedges help keep the tree from pinching your chain saw bar, and helps the tree to fall in the direction of the notch cut.
What are plastic wedges for?
Furniture Levelers(40 Pcs), Rigid Plastic Shims for Leveling, The Plastic Wedges Prevent from Wobble, Can Be Using as Toilet Shims or Table Shims and More.
How do you fell a leaning tree with wedges?
Wedges are designed to do two things: (1) keep your bar and chain from getting pinched when making the back cut (or felling cut); and (2), tip the tree over in the direction you want it to fall. When felling a back-leaning tree, think of your wedge as a lever.
Why are felling wedges plastic?
Plastic wedges are good for felling operations. They do not split easily, and their textured surfaces provide additional holding power in the wood, helping to prevent the wedges from backing out when they are being driven. Plastic wedges are manufactured in a variety of sizes.
Are splitting wedges good?
If you’re looking to split logs or big rounds of wood, splitting wedges are just as important as a good axe or maul. They make the splitting process easier and safer, and allow you to do more with what you have – namely, your own physical strength and your main splitting tool (an axe, maul, or even sledgehammer).
What size felling wedges do I need?
The larger wedge you use for falling trees the better the lift it has. If your trees are in the 18″ range, a 7 1/2″ wedge should be sufficient, provided you don’t use a tack hammer to drive them, but I’d carry at least 4. It’s better to have them and not need them, than to need them and not have them.
What are tree felling wedges made from?
K & H Plastic Felling Wedges made from polymer-inject plastic for a balanced, lightweight, non-sparking wedge. Available in four sizes, plus a tapered version for 10″ wedge.
How do you cut a log without pinching it?
To stop your chainsaw from getting stuck, make a cut on top of the log or tree that’s preferably one-third of the log’s diameter. Use your chainsaw to cut from the underside until you meet the initial top cut. Always stand on the side when cross-cutting to prevent injury.
How much does a wedge move a tree?
Consequently a 1-inch wedge will move the top of the 6-inch tree 140 inches, while the 18-inch tree’s top will move only 46 inches using the same wedge.
What should you not do when a tree falls off?
When cutting up a felled tree, avoid touching the ground with the chain because even a brief encounter will severely dull the cutting teeth on your chain saw. If possible, cut partially through the tree and then rotate it to cut the rest of the way through.
When should you cut a dog’s teeth?
Using a dogtooth cut where the forward lean is minor can work, albeit with a less dramatic or defined “break’ when the final cut is deployed. Using where the tree has been incorrectly assessed as forward-leaning can lead to difficulty developing the required leverage with wedges or felling levers.