Blade Types:Generally speaking there are four major categories of circular saw blades. Combination saw blades are designed to cut both rips and crosscuts and are the most common type of circular saw blades. Unless you have two circular saw blades available at all times, it would be more than a nuisance to switch from a rip to a crosscut blade every time you change the cutting direction.
When I first started using circular saws, what I knew about the circular saw blades was this: how many teeth the blade has and the size of the blade. Back in the spring, I had the opportunity to peer over the shoulder of a demo guy at a Diablo circular saw blades booth at a Home Depot event and was mind-blown at how he was slicing through thick metal like the circular saw blade was a hot knife through butter. Before jumping into which way to insert a circular saw blade when changing the blade, let’s first talk about which direction the blade of the saw actually cuts.
So we’ve summoned all of our wisdom and powers of brevity to bring you this useful guide to choosing the right circular saw blade. Choosing the right circular saw blade for rip cuts might be even more important. We hope this article about choosing the right circular saw blade cuts through the confusion so you can select the best accessory for the job.
are circular saw blades Related Question:
Can you put any blade on a circular saw?
What is this? Not every circular saw is adequate for each material, which means that the blades are made according to whether you need them to cut wood, metal or concrete. Along with that, it is a fact that a single circular saw may need different special blades that aren’t universal or interchangeable.
Are all circular saw blades the same?
Each type of circular saw blade is designed to cut different materials and work with specific power saws. Be certain the blade you choose is suitable for the material you need to cut and that it fits your saw.
Do all circular saw blades fit all saws?
Circular saw blades are designed for use with miter saws, table saws, radial arm saws, cut-off saws and standard circular saws. Many circular blades can be used interchangeably between devices.
What are the 3 basic types of circular saw blades?
They are: Rip Blades, Crosscut, Combination and Specialty blades. Ripping saw blades are designed primarily to achieve a smooth, clean and safe cut when ripping wood or cutting in the same direction as the wood grain.
Can I put a metal cutting blade on my circular saw?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.
Why do circular saws have different saw teeth?
Blades with more teeth yield a smoother cut. Blades with fewer teeth remove material faster, but tend to produce a rougher cut with more “tearout”. More teeth means you will need to use a slower feed rate.
Is there a difference between circular saw blades and miter saw blades?
A miter saw is stationary and the blade is pulled downward onto the wood, while a circular saw is handheld and the blade is pushed through the wood. A circular saw excels at breaking down sheet goods, and a miter saw is best for cutting down longer boards.
How do I choose a circular saw blade?
Generally, blades with more teeth will provide a smoother, finer cut whereas blades with fewer teeth will provide a rougher cut. The benefit of fewer teeth is faster cutting and a lower price. For most construction work, a 24-tooth general use blade is sufficient.
Are all saw blades universal?
Yes, reciprocating saw blades have a universal shank that is standardized to fit all reciprocating saws.
Are Diablo blades worth it?
Diablo blades are available in a wide selection of sizes and styles and are easy to find online and locally at Home Depot. The consensus is that Diablo saw blades balance great quality with excellent value, and are a good choice when replacing or upgrading the OEM blades that are often bundled with new saws.
How many teeth should my saw blade have?
TPI is the number of teeth the blade has per inch. If you’re looking to cut wood or other soft materials, you’ll need a blade with a TPI of 6 up to 20. For harder materials like metal, a TPI between 14 up to 36 is more suitable. The number of teeth can be found on the blade.
How deep can a 6 1 2 inch circular saw cut?
The 18V Brushless Lithium Ion 6-1/2 Inch Deep Cut Circular Saw (C18DBALQ4) is a revolutionary cordless circular saw utilizing a 6-1/2″ blade which allows a 2-19/32″ cutting depth, making it one of the deepest cutting cordless circular saws on the market. This circular saw has a similar cut capacity as a 7-1/4″ saw!
Can you cut wood with a metal-cutting circular saw?
You can use a metal blade to cut wood. A circular saw blade cut metal in a sluggish rotational speed of 25m/s. They are driven by a motor having high power and an A/C vector drive. They are long lasting and non-reusable.
What is a HSS blade used for?
HSS Saw Blades are designed for cutting non-ferrous metal and plastic where maximum cutting life between sharpening is required . Ideal for sawing a wide variety of sizes and shapes such as extrusions, tubes, sheets, plates and some bar stock.
What speed does a circular saw run at?
Recommended Operating Speeds for Circular Saw Blades For extended blade life and quality of cut, saw blades should run between 10,000 and 18,000 SFPM (surface feet per minute).
