The placement of the cordless saw blade, on the left side, gives you a clearer line of sight when you cut. The reason for this is because the main bulk of your circular saw is not blocking your view. Cordless circular left-handed saws provide you better movability.
The categories generally differ in motor orientation and design, weight, torque, and RPMs. Perhaps most significantly, a worm drive saw was traditionally left-side blade and a sidewinder positioned itself with a right-side blade. There are a few things to consider that aren’t immediately evident in the left side vs right side circular saw blade conversation. If you don’t understand what we’re talking about, imagine cutting a thin strip off a sheet of plywood with a blade right saw.
From what I’ve seen these past few years, corded circular saws are mainly right-handed saws. My best guess is that Dewalt was aiming for this full-size 7-1/4″ cordless circular saw to have a similar feel to full-size corded circular saws. While a lot of righties prefer the greater cut line visibility of left-handed saws, corded circular saw users are used to the feel of right-handed saws.
Most of these variables are fairly easy to understand – things like corded or cordless circular saws for example – but the difference between saws with blades on the left and those with blades on the right is not so straightforward. Some circular saws have their blades on the left side, and some have their blades on the right side – and all worm drive saws have the blade on the left. With a left-bladed saw to use the saw with two hands, you need to cross the blade with one of your hands.
why do cordless circular saws have the blade on the left side Related Question:
Why are circular saw blades on the left?
Traditionally, all worm drive saws operated in a blade-left orientation. Furthermore, this orientation likely places the weight of the saw over the portion of the material the user wants to keep, making it easier to stabilize the saw during the cut.
Does Dewalt make a left-handed circular saw?
1. Dewalt Left Handed Circular Saw. Dewalt left-handed circular saw, corded, has a powerful 460 MWO, 5,150 RPM motor that provides more than enough power and speed to make difficult cuts without a problem. The material of the base plate is Magnesium which makes it strong and lightweight.
Do all circular saws rotate the same direction?
Circular Saws This means that the circular saw cuts wood on the upstroke. For a right handed circular saw (most common), this means that the blade rotates counterclockwise, which is similar to the table saw. For a left handed circular saw, the blade rotates clockwise.
Which way do the teeth face on a circular saw?
The teeth should be cutting UPWARDS, in a clock-wise direction. You’ll also notice that when your blade is installed correctly, the teeth will be pointing upward. Remember: circular saws (as most saws) cut on the upward stroke.
Why are Dewalt circular saws left-handed?
The placement of the cordless saw blade, on the left side, gives you a clearer line of sight when you cut. The reason for this is because the main bulk of your circular saw is not blocking your view. Cordless circular left-handed saws provide you better movability.
Can I use circular saw left-handed?
From what I’ve seen these past few years, corded circular saws are mainly right-handed saws. There are some brands, such as Milwaukee, that offer both right- and left-handed saws. Worm drive saws are typically left-handed. Cordless circular saws are typically left-handed as well.
What is the benefit of a rear handle circular saw?
Because of the placement of the motor, Rear Handle Circular Saws get a heck of a lot more torque than a standard Sidewinder Circ Saw. Sidewinders get more RPM’s, but the torque and power beats speed when you’re cutting into hardwoods with a Worm Drive (rear handle) saw.
Why is it called a worm drive saw?
What is a Worm drive saw? A worm drive saw has the motor attached at the rear. This is very powerful and its power is driven through two gears each set at 90 degrees. This setting implies that the engine produces more torque but less Rotation Per Minute (RPM) of about 4,500.
Are worm drive saws better?
Advantages of a Worm Drive Circular Saw The longer distance between the handle and the blade extends your reach while making a cut, which is helpful for crosscutting sheet goods. A worm drive also has larger gear teeth with more load-carrying capacity than a direct drive, which provides more power but also adds weight.
What happens if you put a circular saw blade on backwards?
You can run a saw blade backwards and it cuts pretty well. However it is not at all a good idea. The two big reasons not to do this is that saw tips are much more likely to come off if the saw blade is run backwards and that the whole saw blade is much more likely to come apart if it is run backwards.
Can you put a circular saw blade on backwards?
When cutting vinyl siding with a circular saw, install a fine-toothed blade backwards on the saw for a smoother, cleaner cut, especially in cold weather (when the material is brittle).
Why is my circular saw burning the wood?
Pushing the stock through the saw too slowly is a common cause of saw blade burn. Sometimes a blade that feels dull might only be dirty. If wood pitch resins build up behind the teeth of the blade, the cutting speed will slow down, increasing the chances for burns. Commercial blade cleaners are sold for this purpose.
How do I know when to change my circular saw blade?
Look for worn-down, chipped, broken and missing teeth or chipped carbide tips that indicate it’s time to replace a circular saw blade. Check the wear line of carbide edges using a bright light and magnifying glass to determine if it’s beginning to dull.
Can I put a metal cutting blade on my circular saw?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.
What is Dewalt worm drive?
The DWS535 7-1/4″ Worm Drive Circular Saw has a 15 Amp motor that delivers 4,800 rpm and features 53° bevel capacity for advanced applications. Lightweight and durable magnesium construction for optimum user handling, comfort, and strength includes electric brake which stops blade after the trigger is released.
