The pitch measurement of a saw chain tells a pro user about to the overall size of the saw chain. Saw Setup: The pitch of the chain, the pitch of the drive sprocket, and the pitch of the bar tip must all match. The gauge measurement of a saw chain tells a pro user about the strength of a chain’s drive links.
72.John DeereNotesBar LengthReplacement Chain SizeNumber of Drive Links8, 9, 61, 81, 91Chain length may vary depending on make of bar. 78.2036, 2040Some models used 3/8″.050 chain. “Models with chain brakes use 3/8” low profile chain.
How to determine the pitch and gauge of your saw chain. When ordering saw chain the following information will assist us in matching the correct chain to your saw. Additionally if your saw is a lesser known brand or a consumer type saw purchased from a hardware/big box type store then knowing the bar mount “Style/number” on your saw is helpful.
Matching the right chain to a chainsaw is easy if you have the right measurements matching the right chain to a chainsaw is a little more complicated than finding other power tool accessories, because of the unique way that chainsaw chains are measured. After matching the right size of chain there is still a host of chainsaw chain types and features to choose from and match to the application, but that’s usually much more straight-forward than finding measurements. Page is also a great way to get more familiar with chain sizes and types, even if there’s still some time before your next chainsaw chain replacement.
what is pitch on chainsaw chain Related Question:
Does the pitch matter on a chainsaw chain?
Yes, pitch does matter. If you change to . 325 chain you will also need to change the drive sprocket. If the saw has a floating rim then just change that, otherwise it is a new drum which may not be available.
What is the difference between .325 and 3/8 chain?
The . 325 may be smaller and faster, but it may not be your best bet for your everyday needs. The three-eighths-inch chain is durable and lasts longer than its smaller cousin. This makes it one of the more popular switches for chainsaw users who want to get more out of their saw.
How do I know what pitch my chainsaw chain is?
To determine the pitch (chain size), you’ll need to measure the distance between any three consecutive rivets, then divide the result by 2. The rivets are the small, round pegs/studs that hold the chain segments together. Measure from the first to the third, then divide that number in half to get your chain pitch.
What chainsaw pitch is best?
Experts say the best chainsaw chain for cutting firewood is the Husqvarna High Performance 18 inches, 0.05 gauge, 0.325 pitch chain.
What is the difference between R56 and S56 chainsaw chain?
The difference is the width of the chain track. S56 is . 050″ and R56 is . 043″.
What is a 3/8 pitch chain?
Most consumer saws use a type of 3/8″ chain called “low profile”. We call it Picco. A few older saws use 1/2″ pitch chain. The second is the gauge, or the thickness of the drive lugs. 0.050″ (1.3 mm) and 0.058″ (1.5 mm) are most common, 0.043″ (1.1 mm) and 0.063″ (1.6mm) less common.
Are .325 and 3/8 chains interchangeable?
You can replace a 3/8 Oregon PowerMatch nose with a . 325 PowerMatch nose on any length of Oregon PowerMatch bar you want. Then when you use up the . 325 chain just put the 3/8 nose and rim sprocket back on.
What is the correct file size for 325 Stihl chain?
325″ Pitch Saw Chains. STIHL Files come specifically designed for each pitch of saw chain, with this particular round file suited for use with a . 325″ pitch chain. The file size is 4.8mm x 200mm.
What is chain pitch?
In terms of conveyor chain, pitch is usually defined as the distance between links, as measured from the center of the roller pin on one link to the center of the roller pin on the next link. Note that some precision link conveyors refer to the pitch as the link size.
Are all chainsaw depth gauges the same?
A: When depth gauges are uneven, each cutter tooth on the chain takes a different sized bite. This causes the chain to cut rough and vibrate. If the depth gauges are higher on one side than the other, this causes the chain to cut crooked. The cut will pull in the direction of the side that has the lower depth gauges.
What is most aggressive chainsaw chain?
404 chains are the most aggressive. The 3/8 is a more flexible size with adequate strength, low weight and substantial cutting speed. It can also can handle the power of a 50-100cc chainsaw engine.
Why do Loggers Run chainsaw bars upside down?
Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear.
What chainsaw chain do professionals use?
Typically only professionals and experienced chainsaw users use full chisel chainsaw chains. They are typically used to cut through hardwood such as oak as their square-cornered cutting teeth are more geared up to power through the wood.
What is difference between S56 and Y56 chains?
The S56 could replace a Y56 chain. The difference in the 2 is not significant. The Y indicates that it would have less vibration than other chains. 4 of 4 found this helpful.
What size chain does a Dewalt 60V chainsaw use?
Our durable 16 in. Replacement Saw Chain is designed to fit 16 in. bars on the DEWALT® 60V MAX* Cordless Chainsaw (DCCS670). This low-vibration chain is designed to cut smooth and fast with minimum kickback.