If you plan to use your band saw on a continuous basis for large and heavy gauge wood, metal, or plastic cuts, you should lean towards a larger 18″ band saw. Your depth of cut will help indicate how thick of wood you are able to cut with your band saw while the throat will tell you the distance from the blade to the vertical frame of the band saw. With the help of this guide, you should have a thorough understanding to answer the question of what size band saw should I buy.
There are lots of recommendations about the smallest diameter curve you can cut with each blade width, but the simple answer is “The narrower the blade, the tighter the curve.” I generally keep a 3/16 or 1/4 inch blade on the smaller bandsaw I use for “Scrolling” – general curved work. An expert on bandsaw boxes suggested that a 3/16 inch blade seemed ideal. I have seen a 1/8 inch bandsaw blade, but that is so small that conventional bandsaw guides don’t work – there isn’t room for them to hold the side of the blade behind the teeth … replace the side guides with “Cool blocks” or hardwood blocks soaked in mineral oil, and “Bury” the blade in the blocks.
Many band saws are marketed on this feature alone, which tells the prospective buyer how thick of stock can be cut using the band saw. Not only will the owner’s manual help you set up your saw properly, but it will also help you become much more familiar with the proper methods for safely cutting with your saw. A band saw is among the safest of power woodworking tools, but the saw must be set up properly before use.
Even a small bandsaw with a 1/3HP motor will cut through 6″ of solid oak if the machine is set up properly and the blade is sharp with the appropriate sized teeth. A counterclockwise turn will bring the bandsaw blade towards you, towards the back of the bandsaw wheel. Raise up the top bearing guide column to expose a maximum mount of blade between the top bearings and the table ofd the bandsaw.
A bandsaw will make many cuts with precision and speed-when equipped with the right blade for the application. Bandsaw blades differ in thickness, width, length, and tooth configuration. Every time you change from one bandsaw blade width to another, you have to reset the saw’s tracking, tension, and blade guides.
They just found the bandsaw to be a huge time & effort saver, and their bandsaw was the power tool that scared them the least. Yes, 14-inch bandsaws can be modified with a riser block to allow resawing, but larger bandsaws like this 17-inch bandsaw have a stronger frame, stronger guides, a larger cast iron table, and more importantly: more power. At 2 Horse Power this bandsaw has plenty of power for me to rip through most any thickness of lumber that comes into my workshop, and has a wide 17-inch opening for when I’m cutting really wide boards.
what kind of band saw do i need Related Question:
How do I choose a band saw?
The two main things to consider when choosing a band saw are the depth of cut and the throat. The saw’s depth of cut is the distance from the table to the upper blade guides. Many band saws are marketed on this feature alone, which tells the prospective buyer how thick of stock can be cut using the band saw.
What size band saw do I need for woodworking?
For the small shop furniture maker, go with 14″ as the minimum for a bandsaw, though 16″ is better. Those doing larger work might even want 18″ or 20″ machines. Just make sure you have a minimum resaw height of 12″ for versatility.
What kind of band saw blade should I use?
Use coarse tooth blades (2 or 3 TPI) for re-sawing and cutting thicker materials. For general wood cutting duties in typical 3/4″ material, use a 4 TPI blade for coarse, fast cutting and a 14 TPI blade for slower, smoother cutting. A blade in the 6 to 8 TPI range provides good general-purpose performance.
What is the difference between a wood band saw and a metal band saw?
A metal cutting bandsaw is typically built more solidly than a saw designed for cutting wood, so there are no issues with the machine itself. As for the blade, the wood fibers could clog the metal blade’s teeth more quickly, and the blade will probably cut through the wood more slowly.
How much HP does a bandsaw need?
With general cutting of thinner stock with minor resawing, typically a 1-1/2 horsepower motor will do the trick. If you plan on making your own veneer by resawing larger exotic hardwood or cutting bowl blanks from a log, consider looking at units with a 2-1/2 to 3 horsepower motor.
How thick of wood can a 9 band saw cut?
There are several $99, 9 inch band saws on the market in my area (Ryobi, Skill). The are able to cut a thickness of 2 ½ inches.
How thick of wood can a bandsaw cut?
Band saws are the undisputed champ when it comes to cutting curves and slicing through thick material. Many small band saws can slice though lumber a full four inches thick, and bigger saws handle six-inch cuts.
How do I know what size my bandsaw is?
Hold the blade steady so that the mark remains at the floor, and make a finishing mark there on another piece of tape. Measure the distance between the marks made on the two pieces of tape. That’s the length of your bandsaw blade!
Is a wider bandsaw blade better?
The wider blades are stiffer overall (more metal) and tend to track better on the band wheels than narrow blades. When cutting thicker material, the wider blade has less ability to deviate because the back end, when in the cut, helps steer the front of the blade, especially if the side clearance is not excessive.
When using a bandsaw should you maintain it?
Keep guards in place at all times. The blade guard should be from 1/8 to ¼ inch above stock. Keep hands away from blade and do not open upper or lower bandsaw doors while blade is in motion. Maintain a balanced stance and keep your body under control at all times; do not overreach.
What size blade does a 9 inch bandsaw take?
9″ Ryobi, 9″ B&D, 9″ Craftsman, 9″ Tradesman, 9″ Pro-Tech, 9″ Collins, B&D 3 Wheel. 0.50 (1/2 in.)
Can I use metal saw to cut wood?
You can use a metal blade to cut wood. A circular saw blade cut metal in a sluggish rotational speed of 25m/s. They are driven by a motor having high power and an A/C vector drive. They are long lasting and non-reusable.
Can you cut metal with a wood band saw?
Band saws are not suitable for cutting very thin sheet metal; a rule of thumb suggests the metal to be cut should be thicker than the depth of 3 band saw blade teeth, however they are excellent for cutting thin walled profiles such as box and angle.
What size bandsaw is best?
For a hobbyist, a 12″-14″ bandsaw is the ideal size. This size saw will provide plenty of power and a good deal of resawing capability. A professional will be better served with an 18″ bandsaw for a larger resawing capability. Choosing a 14″ band saw would provide plenty of power in a smaller footprint.
What size blade do I need for a 14 inch bandsaw?
Product Description. 3/16″ Wide x 93-1/2″ Long, 10 TPI, Band Saw Blade, . 025″ Thick, Fits All 14″ Delta/Rockwell, 14″ Jet, Grizzly, 14″ Reliant, Enlon, Star, Bridgewood & Most Imported 14″ Band Saws, Mild Scroll Cutting In Wood.