Not only will you need a different blade for cutting metal than you would for cutting wood, but a metal-cutting blade should not be used in the same saw as the type used for wood. If you do decide to use a wood saw on metal, only use a 7 1/4-inch blade and preferably a worm drive blade, which provides extra torque. As always when purchasing a blade for your circular saw, make sure it has the right diameter and arbor size to match your saw.
Cut Metal Fast There’s nothing wrong with using a good, old-fashioned hacksaw, but there are faster, easier ways to cut metal. Cut Aluminum with Your Miter Saw Making accurate cuts on aluminum rods, tubes and angles is easy with a miter saw and a blade designed to cut nonferrous metal. Cut Metal Lath and Mesh with a Grinder Metal lath and hardware cloth can be cut with a tin snips, but there’s an easier way.
To successfully cut metal or aluminum with a circular saw you’ll ideally need a saw with a brushless motor as you’ll likely cause less wear & tear on the motor when compared to a brushed type motor. If you’re purely looking for a metal cutting circular saw, you’ll also have to consider both the saw blade and the actual saw. If you’re are a construction worker and would consider it cost-effective buying a metal cutting circular saw, you can take a look at the Makita XSC04Z which was explicitly designed as a metal cutting saw with the necessary saw blades already included.
Choosing the right blade for your circular saw is crucial if you want your circular saw to operate at peak efficiency. I will tell you about the different kinds of circular saw blades and what kind of blade is best for each job. Inexpensive: The circular saw blades are cheap compared to table saw blades.
what kind of circular saw blade do i need to cut metal Related Question:
What type of circular saw blade do you need to cut metal?
You should be able to use a carbide-tipped abrasive cutoff wheel for non-ferrous metals like brass, aluminum, copper or lead. Carbide-tipped blades last up to 10 times longer than regular steel ones.
Can I put a metal cutting blade on my circular saw?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.
Can you use any circular saw to cut metal?
Cut Metal with Your Circular Saw It may not be an obvious choice, but fitted with the right blade, a circular saw is a great metal-cutting tool. In our test, it cut through rebar like a hot knife through butter. You can cut mild steel up to about 3/8 in. thick using a ferrous-metal-cutting blade.
Can I use a bigger blade on my circular saw?
The answer is generally this is not a great idea. A larger blade will put excess stress on the motor, and may not have enough strength to provide the cutting power at the tooth you need.
What is a HSS blade used for?
HSS Saw Blades are designed for cutting non-ferrous metal and plastic where maximum cutting life between sharpening is required . Ideal for sawing a wide variety of sizes and shapes such as extrusions, tubes, sheets, plates and some bar stock.
Can you put a circular saw blade on backwards?
When cutting vinyl siding with a circular saw, install a fine-toothed blade backwards on the saw for a smoother, cleaner cut, especially in cold weather (when the material is brittle).
Can carbide tipped blade cut aluminum?
Cutting aluminum with a circular saw requires a few special steps. Ensure that you have the right blade. A carbide blade works but is more likely to grab the material. If possible, purchase a blade specially designed for cutting aluminum and other non-ferrous materials.
Can carbide blade cut metal?
Tungsten carbide, called simple “carbide” in the building trades, is three times harder than steel; and when placed on circular saw blades, reciprocating saw blades and grinder discs, tungsten carbide cuts cleanly through steel.
What is the best tool for cutting metal?
The best manual metal cutting tools you are going to find are the tin snips (for sheet metal) and the hacksaw (for cut-off duties on pipe, tube, angle, etc.). Tin snips resemble scissors and work in much the same way.
Can you put an angle grinder blade on a circular saw?
The exposed blade can cause significant injuries as the uncontrollable tool flies backwards and strikes the operator. For these reasons, angle grinders must never be fitted with circular saw blades.
Can you use a 6 blade in 6.5 circular saw?
Short answer: No. Long answer: You should only ever use larger circular saw blades, when the difference is fairly negligible (1 mm / 1/16″).
Can I use any circular saw blade?
Your saw manual should provide information on compatible blades, but here are some quick tips. Handheld circular saws typically accept blades 4-1/2 inches to 7-1/4 inches in diameter. The teeth are often carbide tipped to stay sharp longer. Tile saws most often use 7-inch or 10-inch diamond blades.
Can I put a 10-inch blade on a 12 inch saw?
By doing so, you can enjoy the optimal speed, performance, and precision needed while cutting. That said, it’s equally true that you can’t make the thicker or deeper cuts using a 10-inch blade over 12-inch. The bigger version offers relatively deeper yet less accurate woodcutting than the smaller-sized saw blade.
Can TCT blades cut metal?
TCT saw blades are specifically designed for cutting metal tubing, pipes, rails, nickel, zirconium, cobalt and titanium-based metal. All of this is possible thanks to the teeth on the saw blades, and the tungsten carbide tips, or TCT.
What is a TCT blade?
A TCT (Tungsten Carbide Tipped) blade is a resharpened circular saw blade. TCT saw blades can be used for the following items: wood, some ferrous metals, non-ferrous metals and plastics. Typically, a saw blade is a toothed blade designed to cut metal.
