The large variety in abrasive belts in the market can make it difficult to figure out which belts would work best for knife making. The first step is to identify the best abrasive grain type for knife makers. At Red Label Abrasives, the most popular belts for knife makers are the. Our EdgeCore belts are so popular that we’ve started selling them in knife making sanding packs. You’re going to get the biggest return on your investment with ceramic belts and our knife makers will be the first to tell you that they’re some of the longest lasting and most effective belts on the market. Although ceramic belts deliver a superior cut and longevity, there are two more abrasives commonly used in knife making: zirconium oxide and aluminum oxide. We provide knife makers with sanding belts that can turn a piece of metal into a beautiful blade.
Knife making and Blacksmithing both require top quality abrasives. When grinding plunge lines, belts that run true are an absolute necessity to knife makers. Both knife making and blacksmithing often use these popular size belts.
what sanding belts for knife making Related Question:
What size belt sander is best for making knives?
2×72 Belt Grinders For professional knife making, 2×72 size belts are considered the industry standard. This size accounts for the majority of belt grinding machines manufactured specifically for knife making in North America.
What kind of sanding belts are best for metal?
As high-performance belts, both zirconia and ceramic sanding belts will last longer and remove metal faster than aluminum oxide or silicon carbide sanding belts. Both belts have the ability to resharpen as they wear and both are primarily used on metal applications. In the end, both types of belts are excellent belts.
What grit belt is best for sharpening knives?
Sharpen Knives (Good Idea) To sharpen yours, start with a 150-grit belt. Slowly run one side of the blade across the belt a few times using light pressure (the sharp edge should point down at an acute angle to the belt). Next, sand the other side. Turn off the sander, swap in a 240-grit belt, and sharpen again.