If you plan to use your band saw on a continuous basis for large and heavy gauge wood, metal, or plastic cuts, you should lean towards a larger 18″ band saw. Your depth of cut will help indicate how thick of wood you are able to cut with your band saw while the throat will tell you the distance from the blade to the vertical frame of the band saw. With the help of this guide, you should have a thorough understanding to answer the question of what size band saw should I buy.
Many band saws are marketed on this feature alone, which tells the prospective buyer how thick of stock can be cut using the band saw. Not only will the owner’s manual help you set up your saw properly, but it will also help you become much more familiar with the proper methods for safely cutting with your saw. A band saw is among the safest of power woodworking tools, but the saw must be set up properly before use.
There are lots of recommendations about the smallest diameter curve you can cut with each blade width, but the simple answer is “The narrower the blade, the tighter the curve.” I generally keep a 3/16 or 1/4 inch blade on the smaller bandsaw I use for “Scrolling” – general curved work. An expert on bandsaw boxes suggested that a 3/16 inch blade seemed ideal. I have seen a 1/8 inch bandsaw blade, but that is so small that conventional bandsaw guides don’t work – there isn’t room for them to hold the side of the blade behind the teeth … replace the side guides with “Cool blocks” or hardwood blocks soaked in mineral oil, and “Bury” the blade in the blocks.
what size bandsaw do i need Related Question:
How do you know what size bandsaw to get?
The resaw capacity is the maximum height (thickness) that can be cut. For the small shop furniture maker, go with 14″ as the minimum for a bandsaw, though 16″ is better. Those doing larger work might even want 18″ or 20″ machines. Just make sure you have a minimum resaw height of 12″ for versatility.
How thick can a 9 band saw cut?
There are several $99, 9 inch band saws on the market in my area (Ryobi, Skill). The are able to cut a thickness of 2 ½ inches.
Is 1 hp enough for a bandsaw?
1 Horespower is a lot of power, it is aproximately 50% more work than a horse can do on a long term basis, and aproximately 6 times what a person can do. A 3/4 or 1 HP bandsaw is pefectly adequate for re-sawing stock at home….
Is a 14 bandsaw big enough?
Re: Bandsaws: 14″, or is bigger better? If you are not going to do any resawing, then a 14″ will do just fine. If you may be cutting out bowl blanks for a lathe, then you should consider a riser to get more vertical clearance.
How long is a 14 bandsaw blade?
Olson® All Pro&trade band saw blades 93-1/2″ length fits most 14″ band saws (Delta, Jet, etc.), hard back and exclusive material, in skip, hook, or regular teeth.
How thick of wood can you cut with a band saw?
Band saws are the undisputed champ when it comes to cutting curves and slicing through thick material. Many small band saws can slice though lumber a full four inches thick, and bigger saws handle six-inch cuts.
What is a 14 inch bandsaw?
Rob Johnstone: Band saw sizes are derived from the diameter of the wheels in the saw. So a 14-inch band saw will have wheels that are 14-inches in diameter. There is another measure that indicates how wide a board you can resaw.
What power bandsaw do I need?
Most home-level models incorporate a 3/4 to 1 horsepower motor, whereas professional models will have larger motors with variable speeds. For woodworkers, the variable speed won’t really matter, as slower than max speeds should be incorporated when cutting metals and some hard plastics.
How much power does a bandsaw use?
For ordinary work, cutting through no more than 1.5″ (4 cm) of wood, at speeds below 2000 fpm, 1/3 HP is adequate. If you want to do a lot of resawing, and run the saw at high speeds, you may want up to 1.5 hp. A sharp blade will use less than half the power of a dull blade.
What is the throat on a bandsaw?
The throat is the distance from the blade to the vertical frame section of the body of the saw. This distance determines the width of cut that can be completed on the band saw. The throat on a free-standing cabinet band saw typically exceeds the 12 to 14-inch throat of smaller, bench-top models.
What is resawing on a bandsaw?
Bandsaw Resawing from the beginning: resawing is cutting a sawn plank of wood into thinner planks on a bandsaw. Thus the cut runs through the plank’s width, which distinguishes bandsaw resawing from ordinary bandsaw rip cuts where the blade runs through the stock’s thickness.
How do you measure a bandsaw on a wheel?
You can easily determine the size of your band saw wheel by measuring its diameter. Simply subtract 2 inches from this total, and you have determined the size of the band saw tire you need as a replacement.
What size blade does a 18 inch bandsaw take?
133 inch Band saw Blades to fit 18 Jet Bandsaw, 18 Craftsman.
How long is a 12 bandsaw blade?
The Craftsman 12″ Bandsaw-Sander takes an 80″ blade or an 80″, 1/2″ wide sanding belt.
What size blade does a 9 inch bandsaw take?
9″ Ryobi, 9″ B&D, 9″ Craftsman, 9″ Tradesman, 9″ Pro-Tech, 9″ Collins, B&D 3 Wheel. 0.50 (1/2 in.)