What.is everyone using or recommending for a all around blade size. Her recommendation concerning blades reasonably flies within the face of standard power saw knowledge she recommends a 3/16″ ten tpi blade. When doing bandsaw boxes you need the put a new blade on and tune up you saw perfectly, then you’ll be a happy box maker 14TPI is really pushing it but it’s what I like.
What.is everyone using or recommending for a all around blade size. Her advice about blades kind of flies in the face of conventional bandsaw wisdom, but she recommends a 3/16″ 10 tpi blade. I avoided much of the sanding by flocking the inside of all the drawers and the inside of the box/carcass instead. I tried the 1/8″ blade also but had trouble keeping the blade on my 14″ GO555 Grizzly saw wheels.
The smaller size allows the bandsaw to make smaller curving cuts without putting binding stress on the blade. “Resawing involves making rip cuts in the face of a wide board. So just like you would on the table saw, you’ll want to select a blade with fewer teeth per inch than the blades you use for crosscutting or cutting curves. For most 14″ band saws, a 1 2”-wide blade with 2-3 TPI is a good choice. Band saws are not suitable for cutting very thin sheet metal; a rule of thumb suggests the metal to be cut should be thicker than the depth of 3 band saw blade teeth, however they are excellent for cutting thin walled profiles such as box and angle.
Have your say… Forum Topics Woodworking Skill ShareYour woodworking skills are displayed for several lifetimes in each project. Share your questions, tips and strategies for the use and maintenan… 6751 Jigs & FixturesUsing a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c… 1908 Wood & LumberDifferent wood requires different woodworking strategies – from cutting to finishing.
“If you have too many teeth you’ll have issues with burning and not being able to cut the curves because of all the saw dust trapped between the blade and the wood. I’ve come to the conclusion that a 3/16” blade for 4 teeth per inch is the perfect blade for these bandsaw boxes. For general wood cutting duties in typical 3/4″ material, use a 4 TPI blade for coarse, fast cutting and a 14 TPI blade for slower, smoother cutting. “The wider the blade, the straighter the cut, so use the widest blade your bandsaw can handle. Most saws accept at least a 1⁄ 2”-wide blade, and many even wider.
Once you’ve achieved a nice smooth texture, finish your bandsaw box with your favorite topcoat, laquer or stain. Kyle’s bandsaw box was crying out for some small knobs to finish off the drawers. That’s one of the best parts about creating your own bandsaw box.
what size blade for bandsaw boxes Related Question:
How do I know what size band saw blade I need?
Hold the blade steady so that the mark remains at the floor, and make a finishing mark there on another piece of tape. Measure the distance between the marks made on the two pieces of tape. That’s the length of your bandsaw blade!
How thick should a bandsaw box be?
Bandsaw Box Project. Use a good size chunk of wood for the box. I’m using a 3” x 4” x 6” piece of spalted tamarind. I wouldn’t use anything less than 2” thick, 3” is better.
What size blade does a 12 inch bandsaw take?
The Craftsman 12″ Bandsaw-Sander takes an 80″ blade or an 80″, 1/2″ wide sanding belt. There is a Vacuum port on the back of the saw. Hook the shop vac to the port during operations.
What is a 3h bandsaw blade?
Description. These are excellent-quality steel bandsaw blades that excel at ripping thick stock and resawing, and are also suitable for roughing blanks for carving or turning. The coarse 3 tpi hooked teeth power through hard woods and difficult grain, and have deep gullets for clearing sawdust.
What size blade does a 9 inch bandsaw take?
9″ Ryobi, 9″ B&D, 9″ Craftsman, 9″ Tradesman, 9″ Pro-Tech, 9″ Collins, B&D 3 Wheel. 0.50 (1/2 in.)
Do I need a 14 inch bandsaw?
For the small shop furniture maker, go with 14″ as the minimum for a bandsaw, though 16″ is better. Those doing larger work might even want 18″ or 20″ machines. Just make sure you have a minimum resaw height of 12″ for versatility.
Is a wider bandsaw blade better?
The wider blades are stiffer overall (more metal) and tend to track better on the band wheels than narrow blades. When cutting thicker material, the wider blade has less ability to deviate because the back end, when in the cut, helps steer the front of the blade, especially if the side clearance is not excessive.
What’s the difference between bandsaw blades?
Bandsaw blades differ in thickness, width, length, and tooth configuration. Length varies by machine, but the size of your saw’s wheels typically determines thickness and width: Smaller machines (9–12″ wheels) need thinner blades to prevent breaking the welds. They also accept only narrow blades, often 1⁄ 2 ” or less.
What size blade does a 14 inch bandsaw take?
Olson® All Pro&trade band saw blades 93-1/2″ length fits most 14″ band saws (Delta, Jet, etc.), hard back and exclusive material, in skip, hook, or regular teeth.
What size blade does a 18 inch bandsaw take?
133 inch Band saw Blades to fit 18 Jet Bandsaw, 18 Craftsman.
What size blade does a Craftsman 10 band saw take?
POWERTEC Band Saw Blade – 63.5 ” x 1/4 ” x 14TPI for Craftsman 10 ” Band Saw 21460 and 21461.
What is 14 TPI for cutting?
8-14 TPI blades are capable of cutting wood and the occasional nail. Demo blades fall into this category. 14-24 TPI is the range of metal cutting, PVC cutting and finish cut blades. The blades cut slowly, but leave being a very smooth edge.
What is 18 TPI for cutting?
Blades 12-18 TPI are typically used for metal and denser materials as well as finish cuts in wood. The 18-24 TPI range is almost always used for metal cutting. Pro Tip: Always keep 3 teeth in contact with the material being cut.
What does TPI mean on a bandsaw blade?
You must select the correct Teeth Per Inch (TPI) for the thickness of material you are cutting.