“Using the wrong size bar or chain can damage the chainsaw and injure the chainsaw operator,” says Vince Christofora of Woodstock Hardware. Read on to learn how to measure your chainsaw’s bar and chain. Sometimes called a chainsaw blade, the chainsaw bar is the metal “Arm” that holds and supports the chain during cutting.
How to choose the chainsaw barThe chainsaw blades are not all the same: if you need to replace the chainsaw bar, first follow the instructions in the chainsaw user’s manual and select the alternative from those approved by the manufacturer. Thanks to these pieces of information, you can easily know how to measure a chainsaw bar. How to measure a chainsaw barIf you are looking for a spare bar for your chainsaw, you need to determine its bar size.
“Using the wrong size bar or chain can damage the chainsaw and injure the chainsaw operator,” says Vince Christofora of Woodstock Hardware. Read on to learn how to measure your chainsaw’s bar and chain. Sometimes called a chainsaw blade, the chainsaw bar is the metal “Arm” that holds and supports the chain during cutting.
“It’s important to note that not every bar or chain will work for every saw. For instance, larger chainsaw bars work well with more powerful motors because it takes more energy to drive the chain around the bar. This is also why most electric chainsaws are typically smaller at around 12-14”. Pictured below is my husqvarna with chainsaw bar and chain metrics detailed. In addition to determining the bar length of your chainsaw, you should be able to measure your chain’s pitch, gauge, and drive links.
what size chainsaw bars are there Related Question:
What sizes do chainsaw bars come in?
The most commonly used chainsaw bar sizes are 11 ″, 12 ″, 13 ″, 14 ″, 15 ″, 16 ″, 18 ″, 20 ″, 21 ″, 22 ″. The smaller chainsaw bar size is used for simpler jobs. For example, a chainsaw with an installed bar of 11-13 inches is used as a delimber, and is also used to cut small non-thick boards.
What is the most popular chainsaw bar length?
A blade bar length of between 14 to 18 inches should serve you well in most cases. You can cut some fairly thick branches with that length of blade bar. It’s still not long enough to handle some of the toughest jobs, but it’s ideal for home use.
What is the most common chainsaw size?
Most residentially used chainsaws fall between 16 and 24 inches of bar and chain length, and are supported by 32 to 62cc engine displacements (although 62cc is on the high end for most property management purposes).
Is there a 22 inch chainsaw bar?
The 22 inch Chainsaw Guide Bar is 22 inch in length with a 0.058 inch gauge and features a double guard to help reduce kickback. This bar is designed to give you high performance and low vibration.
What is the difference between .325 and 3/8 chain?
The . 325 may be smaller and faster, but it may not be your best bet for your everyday needs. The three-eighths-inch chain is durable and lasts longer than its smaller cousin. This makes it one of the more popular switches for chainsaw users who want to get more out of their saw.
How big of a tree can a 16 chainsaw cut?
16 chainsaw would cut through a 14″ tree diameter. 10 inch chainsaw for 8″ in diameter. 6 inch chainsaw can cut a 4″ diameter.
Can you put a different size bar on a chainsaw?
Most chainsaws can operate up to three different bar sizes. Guide bars are measured in length, from the tip of the bar to the heel, and range in size from 14 to over 40 inches. Check the specifications in your model’s operator’s manual to see what size bars you can run on your saw.
What size chainsaw do I need for a 36 inch bar?
A good rule of thumb is that the diameter of the trees you cut regularly should be no more than twice the length of the bar on a chainsaw. That means a 20-inch chainsaw can handle a 36-inch tree (remember, effective cutting length is roughly -2 inches of the bar length).
What size bars does Stihl make?
STIHL guide bars range from 10″ (found on our tree-trimming pole pruners) to an incredible 59″ (used in extreme felling operations).
Are .325 and 3/8 chains interchangeable?
You can replace a 3/8 Oregon PowerMatch nose with a . 325 PowerMatch nose on any length of Oregon PowerMatch bar you want. Then when you use up the . 325 chain just put the 3/8 nose and rim sprocket back on.
What is the difference between full chisel and semi chisel?
The sharp corner of the full chisel cutters split wood fibers easily and provides the fastest, most efficient cutting in clean softwood. The corner of the cutters on a semi-chisel saw chain are slightly rounded.
What’s the difference between 404 and 3/8 chain?
Secondly, the numbers 3/8″ and . 404″ refer to the pitch (distance) between the drive links – these are the bits on the chain that stick down and engage with the drive sprocket on the saw, and the sprocket on the roller-nose end of the bar.
What is the difference between a R56 and a S56 chainsaw chain?
The difference is the width of the chain track. S56 is . 050″ and R56 is . 043″.
What chainsaw chain cuts the fastest?
A full chisel chain is a chain with square cornered teeth, and they’re known for being the fastest cutting blade shape available. A full chisel chain also has a higher number of teeth than other chain options(full chisel is also known as a standard chisel chain).
How long is a 20 inch chainsaw bar?
Measuring Your Chainsaw Bar To find the called length of your chainsaw bar, measure it from its front tip all the way back to the cutter closest to the body of the saw. Round this measurement up to the nearest even number in inches. For example, a bar that measures 18 3/4″ will actually have a called length of 20″.