Based on my experience, miter saw, table saw, circular saw blades and jigsaw blades are the most suitable saw blades for cutting laminate flooring. If you want clean cuts on laminate without frequently replacing your saw blade, it will help find a saw blade with a thin kerf when cutting laminate. The cutting process of flooring laminate could become easy if you got the right cutting tool and saw blade.
The flooring saw is an effective way to cut your laminate boards when installing a floor. If you compare a table saw and miter saw, the former is best for long straight cuts whereas miter saw works best for angular cuts. Following are some of the best blades to cut laminate flooring.
You can make straight cuts with a circular saw, a table saw or a chop saw. When cutting with a circular saw, this means turning the board over and cutting from the back. When cutting with a table saw or chop saw the board should be face-up.
what size saw blade to cut laminate flooring Related Question:
What blade is best to cut laminate flooring?
Carbide tipped blades are best when cutting laminates and harder exotics. Quality blades can be re-edged or sharpened several times saving money. Blades having expansion slots are designed to greatly reduce heat-warping allowing the metal to cool thereby extending the life of the blade.
How many teeth blade for cutting laminate flooring?
Diamond-tipped blades that are made for laminate and fiber cement usually have a low number of teeth to reduce the dust produced by cutting cement. However, typical circular and miter saw blades that are used for laminate will have 80 to 100 teeth for fine, precision cutting.
What circular saw blade do I need for laminate?
What blade should I use to cut laminate countertop? If you use a circular saw, it’s best to use a fine-toothed narrow blade with at least 40 teeth. When it comes to cutting laminate countertop, blades with carbide tips usually last longer than regular steel.
Do you need a special saw to cut laminate flooring?
If you are just learning how to cut laminate floors, understand that you don’t need a special saw. In fact, you can cut the planks using a table saw, miter saw, circular saw, hand saw or laminate cutter.
Can I use a miter saw to cut laminate flooring?
Yes, if you are using the right miter saw for cutting laminate. A power saw is the best miter saw to cut the laminate floor, with 8-12 inches diameter circular blades.
Can you use a table saw to cut laminate flooring?
Table saws produce straight, accurate cuts. Use them to make crosscuts against the grain of laminate flooring when you must trim boards to the proper length. Table saws are also great for rip cuts, made with the grain.
Does laminate flooring dull saw blades?
You see, laminate flooring will destroy a wood cutting blade with alternating top bevel (ATB) teeth in no time at all. The sharp points on this type of blade can’t handle anything that hard – they dull quickly and those tips are what the blade uses to cut cleanly through wood.
Can you use a circular saw to cut vinyl plank flooring?
Circular saws can and often are used to cut vinyl plank flooring, and if you have this type of saw in your garage or woodshop, it can be used very successfully to cut this material.
How do you cut laminate flooring with a utility knife?
After marking the board on the laminate on the plank, you can use the utility knife to score a line directly across the plank. It is best if you use a straight edge for this purpose and you can even slightly move the straight edge about 1/16 of an inch to make the cut a little wider.
Do you cut the tongue off the first row of laminate?
Place the first plank with the tongue side towards the wall, being sure to allow 1/8″ for expansion. We recommend cutting off the tongue on this first row to avoid any problem with the expansion gap. Insert the second plank into the first at an angle pressing the short ends together; then press it down.
Can you cut laminate with a razor blade?
Vinyl tile cutting boards will also cut laminate tile material, since vinyl and laminate are similar. The blade on the tool is essentially a large razor blade installed on a board that has a leverage bar attached. When pulled or pushed, this lever presses the blade down, forcing it to cut through the laminate tile.
Can you cut laminate with a razor knife?
Since all plastic laminates are essentially the same, cutting Formica with a utility knife is identical to cutting most laminates. This method works well for one or two shorter cuts, but is too time consuming and inconsistent to use for larger projects.
Does Blunt saw blade laminate?
Because of the glue and composite materials in laminate floor boards the cutting edge on normal saw blades will blunt almost instantly.
Can you use a miter saw to cut vinyl flooring?
A miter saw is a great tool for cutting vinyl flooring. You can slice the pieces of flooring quite easily. It gives a clean and flawless finish due to straight edges, unlike some other saws. It also can easily cut at an angle, which is probably its most well-known feature.
