A step up from the Craft sander is the Trade AT350 Disc Sander. Popular for the trade workshops, the belt sander is much bigger in size than the bobbin and disc sander. A welcome addition to any home workshop – the Craft AC200 machine is neatly designed to combine a 100mm belt and 200mm disc sander.
Let’s see the difference between the Belt sanders, disc sander, oscillating sander in the followed table-. The combination of both the belt sander and the disk sander in one tool is defined as the combo of belt and disk sander. Well, it is very tricky to choose one useful wood sander among the belt sander vs. disc sander vs. oscillating sander.
I am considering the purchase of a used SS belt sander but I find myself wondering what are the advantages of it over the disc sander. I will simply say that I use my belt sander on every project I build, and never use the disc sander at all. I use the belt sander over the disc sander due to less heat build up and the sanding occurs with the grain giving a better finish.
A disc sander will sand curved lines which will more sanding. “For sanding sides of small boxes, I like the 12″ disc sander. I have a 12” disc sander as well as a stationary belt sander.
when to use belt sander vs disc sander Related Question:
Which is better belt or disc sander?
The disc is great for precise edge work, like fitting miter joints and trueing outside curves. The belt allows you to flatten faces and edges, shape contours and smooth inside curves. We tested 18 combination sanders that cost $500 or less.
When using a belt sander you should never?
1. Do Not use the belt & disc sander if you are too tired, hungry, sad, mad, or dehydrated. Never work while under the influence of drugs, alcohol, or any medication that creates drowsiness or impaired thinking.
When would you want to use a disc sander?
Made up of a circular abrasive paper, mounted on a circular plate; the disc sander is ideal for end grain work, shaping subtle round corners and removing large amounts of material quickly. The work is supported by a flat table which sits in front of the abrasive disc.
Can you use a disc sander for metal?
So, yes you can but use different abrasives dedicated to ONE material only. I know if you use a grinding stone for alluminum it can combust.
What happens to many walking surfaces where finishing sanders are used?
What happens to many walking surfaces in areas where finishing sanders are used? They become slick because of the saw dust covering. If a finishing sander sparks excessively when being used what should be done? Inspect, recondition or replace the brushes.
How effective is a belt sander?
Because they have a lot of power and can handle coarse grits, they excel at the rapid removal of wood. Also, unlike orbital and vibrating sanders, the sanding action is linear, so even with coarse grits you can sand with the grain and get a good-looking result.
What are the 3 most important sander safety rules?
Safety Rules Dust mask advised. Don’t wear loose clothing or gloves, keep long hair tied back. Never adjust Sander or setup while Sander is running. Never remove guard unless authorized by Technician or WRL Manager • Setups requiring anything other than the standard sander equipment must be approved by supervisor.
How much weight should you apply to the belt sander while sanding?
No need to lean on the sander. Just let the weight of the machine do the work. When you get to the end of the board make sure the platen doesn’t cantilever too far past the edge. Allow 1/3 or less of the platen length to project over the edge.
What is the main advantage of the disc sander?
The circular motion of the stationary disk sander makes it most suitable for smoothing end grain, or straight and miter cuts, as well as curved edges (if used with the grain, it will scratch the wood).
What is a 12 inch disc sander used for?
These benchtop beasts bring both muscle and finesse to sanding chores. When you need to quickly and precisely sand outside curves, or fine-tune miters and crosscuts, nothing beats a dedicated 12″ disc sander. Its table accepts a miter gauge to deftly sand precise angles for joinery.
Can you use a belt sander vertical?
Use the sander with the belt turned vertically or horizontally. In either position, the 46-pound machine will do a day’s work and will wear you out long before you wear it out.
What are the risks of using a disc sander?
Abrasions. Eye injuries. Excessive dust. Unsecured material being flung around.
Should you wear gloves when using a belt sander?
Never wear gloves when using a belt sander. Many work gloves do not always fit tightly. This creates a situation where the gloves can actually become caught in the sander. You should always wear protection for your ears when using any type of power tool.
What personal protective equipment should be worn when using the belt sander?
What personal protection equipment should be worn when using the belt/disc sander? Safety glasses, dusk mask, and hearing protection.
What kind of sander do you use on metal?
Disc sanders are heavy-duty tools that have a spinning, circular abrasive surface. Use them to remove material from edges or shape curves. They can also grind metal, plastic or other materials. Detail sanders combine the controlled sanding characteristics of an orbital sander with a triangular pad shape.