The bundles include the Homeowner Bundle and three sizes of Backcountry Bundles with the Alaskan® MK-IV Mill, including 24″, 30″, and 36″ mills. The Alaskan® Winch is a hand winch for the Alaskan® Mill, sold separately from the mill and chainsaw. “The Alaskan® MKIV Chainsaw Mill C2-C3 Packages include the Alaskan® Mark IV C2 or C3 and the Alaskan® MK-IV C2 with mill options ranging in size from 30” to 84″.
The heavy-duty lumber mill converts your chainsaw into a portable milling machine. No bar drilling is necessary; the MK III clamps onto the chain bar. Small log chainsaw sawmill clamping post assembly, Polycarbonate safety guard, Set of assembly hardware.
There are winches available to help pull the mill over large lengths of log, rail extensions and bracket kits to help secure the mill on uneven and large surfaces, and helper handles that attach to the saw bar to provide extra control for jobs requiring more power. There are a number of important parts and accessories that come together to make these mills, and it’s important to know about each part in case your mill needs something replaced. Brackets are used to connect your chainsaw to the mill at the bar.
where to buy alaskan chainsaw mill Related Question:
How big of a chainsaw do I need for an Alaskan mill?
Most Alaskan mills require at least 3 inches extra at the end of the bar for attachment. I also recommend going with a saw with an engine size of at least 60cc for smaller logs and softer woods. A minimum of 90cc would be best though.
Are chainsaw mills worth it?
A chainsaw mill is one of the most efficient and effective tools when it comes to converting wood into lumber. Lumber is a very effective raw material that can be used for a variety of purposes. Be it for firewood or be it for construction purposes, you can certainly utilize lumber for whatever you need.
How many cc is an Alaskan mill?
In general, you will need at least 50cc to run our smallest mill (G777). The more powerful your saw, the easier your milling experience is going to be. Consult the chart to see if your chainsaw has enough power to do the job you want it to do.
Is it worth milling your own lumber?
Milling your own lumber can produce quality material for a fraction of the price of a lumber dealer. In fact, if you purchase your own mill, like I have, you can actually make a profit off of it by selling lumber to other woodworkers and by offering to mill other people’s logs.
What chainsaw do professional loggers use?
Stihl is the most popular chainsaw for professional loggers. It has a long-lasting chain, and you can also enjoy the exceptional cutting speeds available with this brand of chainsaw. Additionally, the chains are high-performance, low vibration, and quiet in their performance.
How fast does a chainsaw mill cut?
Cutting speeds can vary from 8 feet a minute in narrow softwoods, to 1-1/2 feet a minute in wide hardwoods.
How well do chainsaw sawmills work?
A chainsaw has a saw kerf right around 3/8 of an inch, which means it is very inefficient and produces a lot of sawdust. For these reasons, a chainsaw mill is definitely not to be used for optimizing the amount of lumber that you can yield from a log.
How long does it take to mill a log with a chainsaw?
In the world of chainsaw milling, the more powerful the saw the better. You can mill with a smaller saw; however, it’s going to be really slow. On average, it takes me about 10-15 minutes to make one cut using my saw, based on the size logs that I typically cut. Expect that a smaller saw will cut slower.
Can you use a chainsaw on lumber?
Yes, you can use a chainsaw to cut wet wood.
What is a ripping chain?
Ripping chain is chainsaw chain designed specifically for cutting with the grain. Ripping chain is always micro chisel or semi chisel chain which features a re configured cutting angle of 10 degrees.
Can you mill with a 60cc chainsaw?
A 24″ bar is too much for a 60cc saw crosscutting, never mind ripping. Torque and lots of it is required for milling, even with that it is still hard work for the operator and the saw.
Can you mill with a 50cc chainsaw?
Re: Need Advice Concerning the Alaskan Chainsaw Mill The short answer is Yes.. you can do it with a 50cc saw but you will kill it pretty fast.
How much does it cost to mill lumber?
By the Board Foot Pricing varies by species and location but ranges from $0.25 to $0.50 per board foot of sawn lumber. This pricing method places all of the risk of productivity on the sawyer since the customer is only paying for the lumber they receive.
How much do sawmills charge?
The most stable or secure method for pricing for the mill owner is a flat, hourly rate. Rates vary from location to location and range upwards of $100 per hour plus extra charges for travel, broken blades, etc.
Why do loggers Run chainsaw bars upside down?
Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear.