For blade-right models, the correct circular saw blade direction is usually with the label side out. For saws that have the blade on the left, it typically installs with the “ugly” side out.
Most of us have been there at some pointstaring at a blade in one hand and a saw in the other wondering what the correct circular saw blade direction is. Getting the circular saw blade teeth going the correct direction is what’s at the heart of the matter. The saw’s motor runs the blade rotation in a way that the circular saw teeth direction points up as it enters the wood you’re cutting.
The categories generally differ in motor orientation and design, weight, torque, and RPMs. Perhaps most significantly, a worm drive saw was traditionally left-side blade and a sidewinder positioned itself with a right-side blade. There are a few things to consider that aren’t immediately evident in the left side vs right side circular saw blade conversation. If you don’t understand what we’re talking about, imagine cutting a thin strip off a sheet of plywood with a blade right saw.
From what I’ve seen these past few years, corded circular saws are mainly right-handed saws. My best guess is that Dewalt was aiming for this full-size 7-1/4″ cordless circular saw to have a similar feel to full-size corded circular saws. While a lot of righties prefer the greater cut line visibility of left-handed saws, corded circular saw users are used to the feel of right-handed saws.
Most of these variables are fairly easy to understand – things like corded or cordless circular saws for example – but the difference between saws with blades on the left and those with blades on the right is not so straightforward. Some circular saws have their blades on the left side, and some have their blades on the right side – and all worm drive saws have the blade on the left. With a left-bladed saw to use the saw with two hands, you need to cross the blade with one of your hands.
Before you know why cordless saws are left-handed, it is better to learn their differences from right-handed ones. Right-Handed Circular SawA right-handed circular saw has the blade on the right side and the motor on the left. Left-Handed Circular SawCompared to the right-handed saw, the design of the left-handed circular saw is the exact opposite of course-the blade is on the left side and the motor on your right side.
which side blade circular saw Related Question:
Why do circular saws have the blade on the right?
Blade-Right for the Right-Hander Using the saw this way will place the motor weight over the waste edge when you cut from the end-side of a board or sheet. This means the saw eventually cuts off its own support. Most users have no trouble holding the saw steady, but this can result in bind-ups.
Which side of the blade do you cut on?
For most right handed people, cutting to the left of the blade on your table saw is the safest and most accurate way. The position of the table saw from which you cut is determined by the direction of the tilt of the blade and the hand that you are likely to use to hold the workpiece during cutting.
Are there right and left circular saws?
From what I’ve seen these past few years, corded circular saws are mainly right-handed saws. There are some brands, such as Milwaukee, that offer both right- and left-handed saws. Worm drive saws are typically left-handed. Cordless circular saws are typically left-handed as well.
Which way do the teeth face on a circular saw?
The teeth should be cutting UPWARDS, in a clock-wise direction. You’ll also notice that when your blade is installed correctly, the teeth will be pointing upward. Remember: circular saws (as most saws) cut on the upward stroke.
Why are Dewalt circular saws left-handed?
Battery saws need to cut very straight for efficiency. You can see the blade better to accomplish this. It is to be used with the right hand. Saws like this are less likely to contact your body on a kick back.
Can you put a circular saw blade on backwards?
When cutting vinyl siding with a circular saw, install a fine-toothed blade backwards on the saw for a smoother, cleaner cut, especially in cold weather (when the material is brittle).
Which way should saw blade face?
When installing a new blade, make sure the teeth are pointing downward to enable a clean cut through the workpiece. Upward-facing teeth can cause a severe injury to the operator.
Does Dewalt make a left-handed circular saw?
This 7 1/4″ saw is just a cordless version of the corded right side sidewinder. And Dewalt makes a left side blade circular saw that is basically a cordless worm drive if you need that bid of a saw to have the blade on the left side. 2 of 2 found this helpful.
Does Dewalt have a left-handed circular saw?
Dewalt Left Handed Circular Saw Dewalt left-handed circular saw, corded, has a powerful 460 MWO, 5,150 RPM motor that provides more than enough power and speed to make difficult cuts without a problem. The material of the base plate is Magnesium which makes it strong and lightweight.
How do I know if my circular saw blade is backwards?
Correct Circular Saw Blade Direction However, saw and blade manufacturers make it a little easier for you. When you look at the saw’s blade cover there’s an arrow to let you know which direction the motor turns. On the blade, there’s usually a directional arrow as well.
Why is my circular saw burning the wood?
Pushing the stock through the saw too slowly is a common cause of saw blade burn. Sometimes a blade that feels dull might only be dirty. If wood pitch resins build up behind the teeth of the blade, the cutting speed will slow down, increasing the chances for burns. Commercial blade cleaners are sold for this purpose.
Are there left-handed power tools?
Fortunately, left-handed circular saws and other power tools are available. On a left-handed circular saw, the blade sits to the left of the handle, so it is further away from your right hand, which you are using to hold the wood, sheet rock, or other cutting material.
