The most terrible thing which can happen to you is when you put in your chainsaw chain in the wrong direction and begin your task, only for the chainsaw to get blocked in the middle of the project. The direction of the chainsaw blade is always the same regardless of the type or model of chainsaw. “The size of the pitch depends greatly on the type of chainsaw you are using. If your chainsaw is one for heavy duties, then you will have a large pitch. The pitch of a chainsaw is basically the distance between any two repeated chain links divided by 2, that is, the average distance between two successive chain links. So, before purchasing a new chain, make sure it fits the exact pitch so as to avoid ineffectiveness. There are some chainsaw pitches that are most commonly used. They include ¼”, 0.325″, 3/8″, 3/8″ low profile and 0.404″.
Plus, from a safety perspective: if the chain is backwards all the cutters are facing you! Chain direction is not rocket science, but it’s very important for running a chainsaw effectively. Follow these 4 steps to get your chainsaw chain headed in the right direction. If any of this chain component terminology is unclear to you, or if you’re just interested to learn more, check out this in-depth explanation of the anatomy of a chainsaw chain.
Getting the chainsaw chain direction right is very straightforward. In the chainsaw chain direction picture below, the Husqvarna 450 powerhead is on the right and the tip on the left. You can also see the chain direction when looking at the bottom of the bar, facing back toward the powerhead. Hopefully, that makes things clear and you won’t end up with a chainsaw chain on backward!
Putting a chain on a chainsaw the right way is a rather important step in properly using your chainsaw. The easiest way to replace or correct a chain on a chainsaw after you’ve taken the machine apart is to start by reattaching the chain bar to the body of the chainsaw. Again, if the blades of the chain are not facing the correct way, you will think the blade is dull because it is cutting in the wrong direction.
We all know the wrestle of getting to replace your chainsaw’s chain right in the midst of a undertaking and trying to figure out the Direction of Chain on Chainsaw. The best technique to exchange or correct a chain on a chainsaw after you’ve taken the machine aside is to start by reattaching the chain bar to the body of the chainsaw. Today I am going to show you how to put on a chain saw chain and the husqvarna chainsaw chain direction.
which way does chainsaw blade go Related Question:
Which way does the chain go on a chainsaw?
The correct direction for a blade to face is with the pointy edge of the blade teeth facing toward the way the blade rotates. Essentially, you want the pointy edges of the blades rotating on top of the chain bar, moving toward the tip of the bar, and away from the body of the machine.
Can a chainsaw blade go on backwards?
Chainsaw Chain Direction – Don’t Get Your Chain On Backwards! Getting the chainsaw chain direction right is very straightforward. When viewing the chain at the top of the bar, the cutter must be facing towards the tip of the chainsaw bar.
Why is my chainsaw blade smoking?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
How long does a chainsaw bar last?
Re: how long does a bar last The next, a Granberg, lasted about 2 months. About that time Stihl started using them with the same results. A good bar can be filed a few times on both sides and the tip replaced when needed. They could last almost as long as the saw.
Why does my chainsaw blade go dull so fast?
Is the wood that you’re cutting with the chainsaw particularly dirty? Many chainsaw enthusiasts have noted that their blades dull faster when they’re cutting muddy wood. If the logs that you’re cutting up are muddy, then perhaps that is the sole reason why your blade is dulling too fast.
How long should a chainsaw blade stay sharp?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.
Why is my chainsaw burning the wood?
Your chainsaw burns wood because of poor lubrication Lubrication allows the mechanical parts to coordinate much better by avoiding a phenomenon of friction which risks causing traces of burns. This is one of the main reasons that your appliance gives off too much heat and that the wood burns.
Why does chainsaw cut in a curve?
Two main reasons will cause the chain to cut on a curve. The most common reason is from improper hand filing. If one side of the teeth is more heavily damaged, sharpening them down will make them smaller than the other side.
Can you drill holes in chainsaw bar?
Re: Drilling a Chainsaw Bar Drilling that bar may not be as difficult as you think. It will be best if you use a drill press, start with a pilot hole, and then drill to the size you need. Make sure you have a sharp bit, run at the lowest speed you can, and use cutting fluid.
How often should I flip my chainsaw bar?
Some professional loggers would advocate that you should flip your chainsaw bar at the end of every use, particularly when you are cleaning up. Others suggest a more relaxed approach advising that you flip the chainsaw bar only when you are changing your chainsaw blade.
Are chainsaw bars hardened?
The solid chainsaw bar production begins with a solid bar of steel. The machine laser cuts the steel to the desired basic shape. That includes the outer contour, bores, and elongated hole. Looking at the process, the laser makes very little waste in the cut, and Stihl even reclaims the leftover steel.
Is it OK to cut wet wood with a chainsaw?
Can you cut wet wood with a chainsaw? Yes, you can cut the wet wood with a chainsaw. Besides, there is a misconception that wet wood can impact the chainsaw bar and chain. But actually, the damp wood will not dull the chainsaw any faster than using it on other types of wood.
Why do loggers run upside down bars?
Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear.
What happens if you run a chainsaw without bar oil?
Without lubricant, the speed at which the chain moves over the chainsaw bar can cause some serious friction. A slowed-down chain and excessive fuel burning mean there’s a lot of friction between your bar and chain, which means a lot of heat is being produced that could do major damage to your saw.