Do your best to get the sharpening angle right so that you don’t dull the chainsaw blade too fast. Another thing to keep in mind is that cutting dirty wood might dull the chainsaw blade faster. You can’t expect the chainsaw blade to dull at the same rate every time because you’re likely doing different jobs that will take a different toll on the sharpness of the blade.
Your chainsaw blade gets dull so fast because your chain is hitting the ground, the tree is filled with dirt, and/or the bar is bent. A dull chainsaw blade will lead to wear of different components of the saw, including the clutch and engine since they would have to work harder because of the blade’s dullness. If you are cutting firewood that has been left on the ground, you would need to sharpen your chainsaw more often as the accumulated dirt would dull your blade faster.
The chain is what actually does the cutting but many chainsaw owners don’t understand why their chainsaw chain dulls so quickly. If your chainsaw chain is used for cutting ice or wet wood, then you might want to consider a stainless steel chain. In this blog post, we have discussed why your chainsaw chain may be dulling quickly and some ways to reduce and extend the life of your chain.
“I have a Remington Rodeo 51cc Gas Chain Saw chainsaw.I use the following chains: – Oregon 18-Inch Pro-Guard Chain Saw Chain Fits Craftsman, Echo, Homelite, McCulloch, Poulan H72.- Oregon 20BPX072G Micro-Chisel Saw Chain.325-Inch Pitch.050-Inch Gauge 72 Drive Link Count. My problem is as follows. The chain goes dull WAY fast. Without exaggerating, when I put a brand new chain on the saw, I can saw maybe one or two 20 inch diameter PINE trees, before the before the saw stops auto-feeding, and cutting properly. Earlier today I put the”Oregon Pro-Guard” chain on my saw, validated the chainsaw had enough bar and chain-oil and tried cutting a 16-inch diameter Red Oak. Do some night cutting!!!! I wonder how many sparks you will see. Ok lets see a picture of the dull chains…. and the naked bar if possible from an end sighting down.
Ga1990, there are many factors as to why the chain is getting dull fast. You’re rakers may be too far down, which will contribute to a quick dulling chain. If you need assistance with chain sharpening and angles, search this site.
why do chainsaw chain dull so quickly Related Question:
Why does my chainsaw get dull so fast?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
How long should a chainsaw chain last?
The lifetime of a chainsaw chain has no fixed limit and depends on usage and maintenance. The chain should last many years; 5-6 years should be no problem. However, if the chainsaw chain is used properly and taken care of, it can last way longer.
How often does a chainsaw chain need to be sharpened?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.
Do chainsaw chains get dull?
When cross cutting (against the grain of the wood) a dull chainsaw chain creates fine sawdust instead of coarse strands. The saw is producing smoke even when your chain is oiled and the chain tension is correct. The chainsaw produces an uneven cut. This could mean that your chain has dull cutting teeth on one side.
Is it worth sharpening a chainsaw chain?
Sharpening your chainsaw chain is definitely worth it as a sharp chainsaw chain is easier to work with. It takes less effort to cut through wood and your chain will make cleaner cuts with sharp blades. A chainsaw chain can be sharpened multiple times without much of a cost.
How do you clean a chainsaw chain before sharpening it?
We soak them for an hour, or overnight in Lye (drain cleaner), purchased in a can, dry powder form at a hardware store. Next, we scrub the chain on a flat surface with hot water, dish soap and a coarse brush. Rinse, pat dry, and sharpen the cutters. The rakers are checked for height and ground down, if necessary.
What is the longest lasting chainsaw chain?
Even more durable than standard chain is carbide-tip chainsaw chain. Carbide tips last longer than chrome and are not affected by heat. Because of these qualities, carbide chain is excellent for cutting objects that would dull standard chain quickly, such as railroad ties.
How much does it cost to sharpen chainsaw chain?
A typical chainsaw can be sharpened up to 10 times before it’s time for a replacement. The cost to have a chainsaw sharpened ranges from $13 to $16. The average cost per chainsaw sharpening is $14.50 for people who choose to have their chainsaws professionally sharpened.
Why is my chainsaw bar smoking?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
Do chainsaw chains stretch over time?
It’s perfectly normal for a chainsaw chain to stretch after regular use. But, if you allow your chainsaw to become too loose, it can easily come off and pose a dangerous situation for you. A chainsaw chain stretches and loosens from tension and extreme friction.
How often should you flip the bar on your chainsaw?
Some professional loggers would advocate that you should flip your chainsaw bar at the end of every use, particularly when you are cleaning up. Others suggest a more relaxed approach advising that you flip the chainsaw bar only when you are changing your chainsaw blade.
How tight is too tight for chainsaw chain?
A properly-tensioned chainsaw chain should still be just a little loose on the chainsaw guide bar, but the chain needs to be tight enough that you can’t pull the drive links out of the bar nose.
Is it better to sharpen chainsaw chain or buy new?
Sharpen before replacing If your chainsaw chain becomes dull after a long lifespan, it will struggle to cut through the wood at the efficiency it once had. This is why, where possible, you should be looking to keep the will be chain sharp, as sharpening a better course of action than sourcing a replacement.
Can you use wd40 on a chainsaw?
Step 5: Lubricate Your Chainsaw Before you put the chain back onto your chainsaw you will have to lubricate it to clean it, using WD-40® Multi-Use Product. Before refitting the chain into the chainsaw, wipe off all the excess residue and then reattach it to the guide bar.
What can I use to clean my chainsaw chain?
In a well-ventilated area, take a bucket and mix one cup of ammonia with one gallon of water. Place the chainsaw chain in this solution and let it soak for 15 minutes. Put on a pair of thick rubber gloves for protection. Then, use a soft-bristled toothbrush to scrub each section of the chain until it’s free of debris.