Now people are obsessing over the origins of the chainsaw, after TikTok user hellomynamesjon shared a video saying it was first invented to help with childbirth, which sounds more than a little terrifying. Yes, the first chainsaw really was invented to be used in childbirth – though thankfully it was a far cry from the electric-powered monsters people cut down trees with today. Modern chainsaws come in many sizes, from small electric saws intended for home and garden use, to large “Lumberjack” saws.
The original chainsaw looked more like a modern-day kitchen knife than what we would call a chainsaw nowadays. In the 1780s, in a bid to make the removal of the pelvic bone easier and less time-consuming two doctors named John Aitken and James Jeffray invented the chainsaw. In 1883, a patent for a chainsaw for cutting boards was passed and then subsequently more and more chainsaws developed.
The original chainsaw was invented and used by two Scottish doctors in the 1780s. Interestingly, it’s also the first Stihl chainsaw because the first wood chainsaw was invented by Andreas Stihl – the founder of the Stihl chainsaw company. Stihl also claims to have invented the first chainsaw for use by one person in 1950 – check out all the Stihl chainsaw years made for more info.
The modern-day chainsaws we’re used to seeing are mainly utilised for tree cutting. Shockingly, the chainsaw was originally invented to assist in childbirth – yes, you read that correctly. The doctors’ chainsaw was used during symphysiotomies.
why install chainsaw bar upside down Related Question:
How often should you flip the bar on your chainsaw?
Some professional loggers would advocate that you should flip your chainsaw bar at the end of every use, particularly when you are cleaning up. Others suggest a more relaxed approach advising that you flip the chainsaw bar only when you are changing your chainsaw blade.
What is the hole in the end of a chainsaw bar for?
These two holes are used to hold the saw blade. if your chainsaw blade not have holes or just have one hole. it not work. if you know how to drill, you can drill two holes on your chainsaw blade.
What chainsaw chains do professional loggers use?
Full-chisel teeth chains are usually used by professionals on large saws. Semi-chisel teeth are rounded, so the risk of kickback is less, and they stay sharper longer. Semi-chisel teeth cut slower but are a better choice in dirty wood than full chisel.
What causes a chainsaw to cut in a curve?
One major reason a chainsaw curves to either the right or left during a cut is that it was unevenly sharpened. The unequal teeth of the chain cause it to take a different-sized bite into the wood. What is this? The uneven sharpness of the chain is mainly due to manual sharpening, especially with the use of a file.
Why does my chainsaw blade dull so quickly?
Is the wood that you’re cutting with the chainsaw particularly dirty? Many chainsaw enthusiasts have noted that their blades dull faster when they’re cutting muddy wood. If the logs that you’re cutting up are muddy, then perhaps that is the sole reason why your blade is dulling too fast.
Why does my Poulan chainsaw dies when I give it gas?
The carburetor might be clogged. A clogged carburetor is often caused by leaving fuel in the chainsaw for a long period of time. Over time, some of the ingredients in the fuel may evaporate, leaving behind a thicker, stickier substance. This sticky fuel can clog up the carburetor and cause the chainsaw engine to stall.
How do you know if your chainsaw clutch is bad?
Does the engine loose revs, or the engine keep revving and just the chain stops? If the engine is still running at normal revs, and the chain slows down, then it’s a problem with the clutch. Worn out, gummed up, jammed springs etc. If the engine looses revs under load then it’s more likely a fuel or carb problem.
Is it OK to run a chainsaw without the bar?
I do not recommend letting it run for more than 5 minutes. Without a chain, the chainsaw will cause the engine to rev higher. This can eventually overheat the engine’s components and increase wear and tear.
Can you drill holes in chainsaw bar?
Re: Drilling a Chainsaw Bar Drilling that bar may not be as difficult as you think. It will be best if you use a drill press, start with a pilot hole, and then drill to the size you need. Make sure you have a sharp bit, run at the lowest speed you can, and use cutting fluid.
Is a full chisel chain the same as a ripping chain?
In reality ripping chain is a semi or micro chisel chain filed to 10 degrees rather than 30 degrees. Full chisel filed to 10 degrees tends to cause a lot of vibration when cutting planks with a chainsaw although some people do find a chisel cutter is better in certain woods.
What is most aggressive chainsaw chain?
404 chains are the most aggressive. The 3/8 is a more flexible size with adequate strength, low weight and substantial cutting speed. It can also can handle the power of a 50-100cc chainsaw engine.
Can a bent chainsaw bar be straightened?
Solid body bars with replaceable noses can be straightened by hammering with the bend peak up on a flat anvil. Laminated bars need a piece of rubberized belting of approximate 1/4″ thickness between bar and anvil to properly hammer straighten .
Does cutting wet wood dull a chainsaw?
Does Cutting Wet Wood Dull a Chainsaw? Using your chainsaw to cut through wet wood will not dull the chain any faster than using it for other types of wood. When you think about it, your chainsaw chain is already wet. True, it is not wet with water.
How long should a chainsaw chain stay sharp?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.
When should you throw away a chainsaw chain?
The chainsaw pulls in one direction, which results in a crooked finish. Blunt cutting teeth on one side or uneven teeth lengths usually cause this. The teeth has hit rocks or dirt and broken. If you notice the tops of the teeth are missing you will need to replace the chain.