This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil or an inferior type of oil that is being slung off the chain and not lubricating. A properly sharpened chain will require little pressure be applied to have it cut correctly.
First things first, we have to figure out why and how the chainsaw chain or chainsaw blade smoking. If the chainsaw chain is over tightened, it might cause overheating and smoke build-up in the bar area of the chainsaw. Ensure a proper chainsaw bar and chain sizes that fit your chainsaw itself.
There is a distinct difference between a smoking chainsaw chain and a smoking engine. The chainsaw chain is the hardest working component on your chainsaw so it’s no surprise to have it show signs of stress. Your chainsaw smoking when cutting is a sure sign the chain needs a close inspection.
why does chainsaw blade smoke Related Question:
Why is smoke coming from my chainsaw?
The most likely causes of smoking and overheating are a lack of air and/or a lack of lubrication to the engine or the chain saw chain guide bar.
Why is my chainsaw blade burning the wood?
Your chainsaw burns wood because of poor lubrication Lubrication allows the mechanical parts to coordinate much better by avoiding a phenomenon of friction which risks causing traces of burns. This is one of the main reasons that your appliance gives off too much heat and that the wood burns.
Why is my chainsaw blade smoking and not cutting?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
Why is my chainsaw blowing white?
Why is my chainsaw blowing white? While black smoke is caused by the burning of more fuel than air, blue or white smoke is generally caused by the burning of excess oil.
How do you tension a chainsaw blade?
Loosen the bar nuts on the side of the chainsaw guide bar. Insert a screwdriver or chainsaw scrench into the Intenz slot of the guide bar. Turn the screwdriver or scrench clockwise to move the guide bar forward to proper chain tension. Perform a “snap” test to ensure proper saw chain tension.
Is it normal for a chainsaw bar to get hot?
It is normal for the blade of your chainsaw to produce some heat. But it should not overheat or smoke. If you notice any overheating or smoke coming out of the blade, you should stop its use at once.
Why does my chainsaw chain spark?
The tension not being right is perhaps the most common reason a chainsaw sparks. If the tension is not right, it means that there is too much free moving space between the bar and the chain. When you are running it, the two will collide, and you will notice the sparks spontaneously.
Why is my chainsaw chain not tightening?
If you’re having trouble tightening the chainsaw chain, it may be adjusted properly already. Check the tension on the chain by grasping it in the middle of the top of the guide bar and giving it a quick snap. The chain should quickly snap back into place with no sagging on the underside of the guide bar.
How much tension should be on a chainsaw chain?
A properly-tensioned chainsaw chain should still be just a little loose on the chainsaw guide bar, but the chain needs to be tight enough that you can’t pull the drive links out of the bar nose.
When should you throw away a chainsaw chain?
The chainsaw pulls in one direction, which results in a crooked finish. Blunt cutting teeth on one side or uneven teeth lengths usually cause this. The teeth has hit rocks or dirt and broken. If you notice the tops of the teeth are missing you will need to replace the chain.
What makes a chainsaw overheat?
Common reasons behind chainsaw overheating are a wrong oil/fuel mixture, a blocked or clogged exhaust. It is also possible that the air filter is clogged. Or you are using a dull chain. If you are using your chainsaw for an extended time, or it is not powerful enough for the job, it can also overheat.
How hot should a chainsaw get?
How Hot Does A Chainsaw Crankcase Get? The oil conductor does not provide sufficient heat protection to keep the engine cooler; instead, the oil is more efficient at drawing heat to it instead. At temperatures over 220 Fahrenheit and occasionally as high as 220F, it often stratifies on top of an oil pan.