Do your best to get the sharpening angle right so that you don’t dull the chainsaw blade too fast. Another thing to keep in mind is that cutting dirty wood might dull the chainsaw blade faster. You can’t expect the chainsaw blade to dull at the same rate every time because you’re likely doing different jobs that will take a different toll on the sharpness of the blade.
Your chainsaw blade gets dull so fast because your chain is hitting the ground, the tree is filled with dirt, and/or the bar is bent. A dull chainsaw blade will lead to wear of different components of the saw, including the clutch and engine since they would have to work harder because of the blade’s dullness. If you are cutting firewood that has been left on the ground, you would need to sharpen your chainsaw more often as the accumulated dirt would dull your blade faster.
Do your best to get the sharpening angle right so that you don’t dull the chainsaw blade too fast. Another thing to keep in mind is that cutting dirty wood might dull the chainsaw blade faster. You can’t expect the chainsaw blade to dull at the same rate every time because you’re likely doing different jobs that will take a different toll on the sharpness of the blade.
“I have a Remington Rodeo 51cc Gas Chain Saw chainsaw.I use the following chains: – Oregon 18-Inch Pro-Guard Chain Saw Chain Fits Craftsman, Echo, Homelite, McCulloch, Poulan H72.- Oregon 20BPX072G Micro-Chisel Saw Chain.325-Inch Pitch.050-Inch Gauge 72 Drive Link Count. My problem is as follows. The chain goes dull WAY fast. Without exaggerating, when I put a brand new chain on the saw, I can saw maybe one or two 20 inch diameter PINE trees, before the before the saw stops auto-feeding, and cutting properly. Earlier today I put the”Oregon Pro-Guard” chain on my saw, validated the chainsaw had enough bar and chain-oil and tried cutting a 16-inch diameter Red Oak. Do some night cutting!!!! I wonder how many sparks you will see. Ok lets see a picture of the dull chains…. and the naked bar if possible from an end sighting down.
Ga1990, there are many factors as to why the chain is getting dull fast. You’re rakers may be too far down, which will contribute to a quick dulling chain. If you need assistance with chain sharpening and angles, search this site.
why does my chainsaw go blunt quickly Related Question:
Why does my chainsaw chain get dull so fast?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
How long should a chainsaw chain stay sharp?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.
Why is my chainsaw burning the wood?
Your chainsaw burns wood because of poor lubrication Lubrication allows the mechanical parts to coordinate much better by avoiding a phenomenon of friction which risks causing traces of burns. This is one of the main reasons that your appliance gives off too much heat and that the wood burns.
How often should you flip the bar on your chainsaw?
Some professional loggers would advocate that you should flip your chainsaw bar at the end of every use, particularly when you are cleaning up. Others suggest a more relaxed approach advising that you flip the chainsaw bar only when you are changing your chainsaw blade.
Why is my chainsaw bar smoking?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
How many times can you sharpen a chainsaw?
Cutters can be sharpened up to 10 times or more before the chain needs replacing. If your cutters are worn unevenly after a few sharpenings, a professional can regrind them to uniform shape. If you use the same chain for a few years, then buy a new one, the new one won’t mesh smoothly with the sprocket and bar.
Is it worth sharpening a chainsaw chain?
Sharpening your chainsaw chain is definitely worth it as a sharp chainsaw chain is easier to work with. It takes less effort to cut through wood and your chain will make cleaner cuts with sharp blades. A chainsaw chain can be sharpened multiple times without much of a cost.
What is the longest lasting chainsaw chain?
Even more durable than standard chain is carbide-tip chainsaw chain. Carbide tips last longer than chrome and are not affected by heat. Because of these qualities, carbide chain is excellent for cutting objects that would dull standard chain quickly, such as railroad ties.
Will cutting wet wood dull a chainsaw?
Does Cutting Wet Wood Dull a Chainsaw? Using your chainsaw to cut through wet wood will not dull the chain any faster than using it for other types of wood. When you think about it, your chainsaw chain is already wet. True, it is not wet with water.
What chainsaw chains do professional loggers use?
Stihl is the most popular chainsaw for professional loggers. It has a long-lasting chain, and you can also enjoy the exceptional cutting speeds available with this brand of chainsaw. Additionally, the chains are high-performance, low vibration, and quiet in their performance.
When should I replace chainsaw chain?
Once the wear markers have been met it’s essential to replace the chainsaw chain. Filing past the wear marker will greatly reduce the chain’s cutting performance, and increases the risk of the tooth breaking off. Ideally you should reach the tooth and depth gauge markers at roughly about the same time.
When should I replace my chainsaw sprocket?
You should replace drive sprocket systems after every two chains, or sooner. It’s important not to run a new chain on a badly worn drive sprocket.
Can you over tighten a chainsaw chain?
There is a tension screw located near the base of the bar on the chainsaw. To tighten the chain, turn it clockwise, and to loosen turn it counterclockwise. Don’t over-tighten the chain as this could cause it to break.
What causes a chainsaw chain to stretch?
A chainsaw chain stretches and loosens from tension and extreme friction. The friction from cutting through wood makes the chain very hot and the heat causes it to loosen. The heat expands the guide bar and when it cools, the chain has stretched. The chain will also loosen as it wears down from use.
How do I make my chainsaw chain more aggressive?
In general, if you want to have an aggressive cut, you are going to need a chainsaw chain that operates as quickly as possible. A chainsaw chain with full chisel teeth means that you are cutting with a very high speed. Speed being one of the main ingredients behind an aggressive chain, this is clearly vital.