This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil or an inferior type of oil that is being slung off the chain and not lubricating. A properly sharpened chain will require little pressure be applied to have it cut correctly.
There is a distinct difference between a smoking chainsaw chain and a smoking engine. The chainsaw chain is the hardest working component on your chainsaw so it’s no surprise to have it show signs of stress. Your chainsaw smoking when cutting is a sure sign the chain needs a close inspection.
First things first, we have to figure out why and how the chainsaw chain or chainsaw blade smoking. If the chainsaw chain is over tightened, it might cause overheating and smoke build-up in the bar area of the chainsaw. Ensure a proper chainsaw bar and chain sizes that fit your chainsaw itself.
why does my chainsaw smoke when cutting Related Question:
Why is smoke coming from my chainsaw?
The most likely causes of smoking and overheating are a lack of air and/or a lack of lubrication to the engine or the chain saw chain guide bar.
Why is my chainsaw blade burning the wood?
Your chainsaw burns wood because of poor lubrication Lubrication allows the mechanical parts to coordinate much better by avoiding a phenomenon of friction which risks causing traces of burns. This is one of the main reasons that your appliance gives off too much heat and that the wood burns.
Why does my chainsaw go blunt so quickly?
What is this? Many chainsaw enthusiasts have noted that their blades dull faster when they’re cutting muddy wood. If the logs that you’re cutting up are muddy, then perhaps that is the sole reason why your blade is dulling too fast. It won’t be hard to notice whether the wood that you’re cutting is dirty or not.
Why is my chainsaw blowing white?
Why is my chainsaw blowing white? While black smoke is caused by the burning of more fuel than air, blue or white smoke is generally caused by the burning of excess oil.
Why does my chainsaw smoke and not cut?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
Is Wet wood harder to cut?
Wet Wood Vs Dry Wood But wet wood is actually much easier to cut than dry wood. With dry wood lacking moisture content, more friction is created as the chainsaw chain comes into contact with the wood fibers. This friction results in the chain slowing down.
How often should you flip the bar on your chainsaw?
Some professional loggers would advocate that you should flip your chainsaw bar at the end of every use, particularly when you are cleaning up. Others suggest a more relaxed approach advising that you flip the chainsaw bar only when you are changing your chainsaw blade.
How long should chainsaw blades last?
The lifetime of a chainsaw chain has no fixed limit and depends on usage and maintenance. The chain should last many years; 5-6 years should be no problem. However, if the chainsaw chain is used properly and taken care of, it can last way longer.
How long should a chainsaw chain stay sharp?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.
Can you overheat a chainsaw?
A chainsaw overheating is not uncommon, especially in the summer. Common reasons behind chainsaw overheating are a wrong oil/fuel mixture, a blocked or clogged exhaust. It is also possible that the air filter is clogged. Or you are using a dull chain.
Can you use wd40 on a chainsaw?
Step 5: Lubricate Your Chainsaw Before you put the chain back onto your chainsaw you will have to lubricate it to clean it, using WD-40® Multi-Use Product. Before refitting the chain into the chainsaw, wipe off all the excess residue and then reattach it to the guide bar.
Can I clean a chainsaw fuel filter?
Brush the air filter gently with a soft brush or wash it in warm soapy water then dry it. Do not use compressed air to clean it – compressed air can blow holes in the filter, allowing dust and debris into your carburetor.
How do I know if my chainsaw oil pump is bad?
Generally speaking, the signs of a chainsaw oiler problem are easily spotted. If the chainsaw seems like it’s getting too hot or producing smoke, that is a sign that there is an oil deficiency in the chain. This is not good for the life of your chainsaw. If you spot this problem, it is time to troubleshoot the issue.
How do you clean a chainsaw oil pump?
Clear any sawdust, congealed lubricant and dirt out of the oil outlet hole on the guide bar. Keep the oil pump tank clean: even if it is equipped with a filter, wipe away all dirt around the cap before refuelling. Regularly check and clean the tank vent and the filter itself.