If the operator has repeatedly been trying to start the chainsaw through the recoil starter system, they may have accidentally flooded the engine with fuel. If you believe fuel has flooded the chainsaw engine, pull the starter cord several times while holding the throttle, dry and replace the spark plug, and then try starting the chainsaw again. Gasoline will start to deteriorate if left unused and sitting, so if the chainsaw hasn’t been started in a while, be sure to check that old fuel is not collecting inside the chainsaw.
It is another reason why chainsaws are so hard to start. So in cases where it’s become difficult to start a chainsaw, then you should consider the temperature as a factor. It is amongst the main reasons why are chainsaws so hard to start.
Here, we look at the top 11 reasons why your chainsaw won’t start. Another common reason a chainsaw won’t start is that the sparkplug is old, dirty, damaged or not correctly attached. If the temperature is too low, it can make it hard to start a chainsaw.
Many homeowners have had chainsaws that are hard to start when it’s cold. The main reasons why your chainsaw is often hard to start when cold are;. How to fix a chainsaw that won’t start when it’s cold outside.
why is chainsaw hard to start Related Question:
How do I make my chainsaw easier to start?
Try to start the chainsaw after priming the carburetor. 5. Activate the choke by moving the lever to the full choke position and pull the starter rope 3 or 4 times to start the engine. If that doesn’t work, move the choke lever to half choke and pull the starter rope, 6 times maximum, to start the engine.
Why is a Stihl chainsaw so hard to start?
Problems starting a Stihl chain saw can be related to gasoline storage, spark plugs, and incorrect starting procedures.
Which chainsaw is easiest to start?
A gas-powered chainsaw is always easier to start if it’s been properly maintained.
Can you push start a chainsaw?
The biggest advantage of an electric chainsaw is that you don’t have to pull a cord and it needs minimum effort to get it started. You can start it by just pushing a couple of buttons and there is no throttle to open.
How long to wait if chainsaw is flooded?
Many people wonder if a flooded chainsaw will fix itself? The answer is yes, but not always. By letting the chainsaw sit for about 20 minutes it will allow some of the fuel inside the engine to evaporate.
Should I start chainsaw with brake on or off?
Check the Chain Brake When engaged, the chain brake stops the chain from rotating around the saw’s guide bar. When using a chainsaw, you should always start it with the chain brake engaged so the chain does not move.
Is my chainsaw flooded?
One tell-tale sign that a chainsaw has flooded is the smell of fresh petrol near the muffler. To ascertain whether this is indeed the problem, simply disassemble the part, pull the starter cord as if you were switching on the engine, then dry it, reassemble it and try switching it on again.
Who makes the most reliable chainsaw?
STIHL are still the number one selling chainsaw brand in the USA. The Stihl 271 Farm Boss is a great saw for the small farm owner, or if you have a larger section of land with mature trees, and you need a reliable saw that can handle big jobs on a regular basis.
What size chainsaw do I need to cut firewood?
Many homeowners find that a 14- to 16-inch chainsaw is a good length for them. That’s long enough to limb-up trees, cut down small trees, and cut most firewood, but it’s also short enough that it’s easy to control the saw.
How many cc chainsaw do I need?
Your work will determine the type of chainsaw you purchase. Heavy work: If the task requires long hours felling trees, consider a professional chainsaw powered with a 65 to 110 cc engine and a guide bar of 16 to 20 inches. Moderate work: Cutting logs for firewood only needs a 55 cc engine with a 16 inch guide bar.
How does a choke work on a chainsaw?
The choke position increases the richness of the air and fuel mixture the carburetor sprays into the cylinder. With the master control lever in the choke position, the flow of fuel into the engine increases and the flow of air decreases.
Will dirt dull a chainsaw?
Nobody plans to run their chain saw into dirt. But when you cut close to the ground, you’re just begging for a quick dip into dirt, rocks and crud. All it takes is a second in the dirt to dull the cutters. In addition to dulling the cutters, dirt also wears out the chain links faster, causing the chain to stretch.
Will a flooded engine fix itself?
Will a flooded engine fix itself? No. You have to take appropriate measures to restore the fuel and air balance in your car’s engine.
How do I know if my chainsaw spark plug is bad?
If it’s not producing any sparks at all, your chainsaw needs a new plug. If there are only a few sparks coming out of one side of the electrodes but none on the other side, it’s not bad enough for you to worry about, but it will affect your performance.
How long to wait if engine is flooded?
Perhaps the best remedy for a flooded engine is time. Simply open the hood of your car and let excessive fuel evaporate for as long as you can. After about 20 minutes try starting your car again without hitting the gas pedal.