At the end of the day, there’s nothing really dangerous about all that sparking, it’s just that you will probably need to sharpen and replace the chain more frequently. There can’t be too much snag between the actual chain and the bar, as that alone could make it budge overly much and hit the thing during motion, causing those sparks we’re on about here. Put too much weight behind it, angle it wrongly and you have a struggling chainsaw that only wants to throw a sparking show.
I’ll be going over the reasons why a chainsaw is sparking and how to fix the issue and prevent it from happening again. While it does not signify that your chainsaw has received critical damage, sparks from a chainsaw is a problem that should be addressed as fast as possible as it could lead to wear and tear of the saw. Your chainsaw could be sparking because there’s a foreign object stuck in the wood such as a nail and the bark could be dirty.
“Have a brand new 20” bar with a brand new WoodsmanPro 30SC semichisel chain on my MS 460. The second is that maybe the chain is twisting a bit when I dont hit the branch squarely – and friction between the chain and bar are producing the spark. Small stuff will create wear on a bar and chain, and as Al suggested crank up the bar lube output, use high rpm and make sure the chain is tensioned properly.
Almost any bush, shrub, tree in a fence row will collect some dirt in the bark. Obviously loose bark trees such as a shagbark hickory will collect more. If it is Osage Orange, you already have a very tough wood.
why is chainsaw sparking Related Question:
What does it mean when chainsaw blade smokes?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
Why does my chainsaw burn the wood?
Your chainsaw burns wood because of poor lubrication Lubrication allows the mechanical parts to coordinate much better by avoiding a phenomenon of friction which risks causing traces of burns. This is one of the main reasons that your appliance gives off too much heat and that the wood burns.
Are chainsaw blades supposed to be loose?
A properly-tensioned chainsaw chain should still be just a little loose on the chainsaw guide bar, but the chain needs to be tight enough that you can’t pull the drive links out of the bar nose.
How long should a chainsaw stay sharp?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.
How often should you change the bar on a chainsaw?
If you are looking for a general idea for how often you should replace a chainsaw bar, a rule of thumb is to replace the bar of your chainsaw once after you have gone through three chains on the same bar.
When should you throw away a chainsaw chain?
The chainsaw pulls in one direction, which results in a crooked finish. Blunt cutting teeth on one side or uneven teeth lengths usually cause this. The teeth has hit rocks or dirt and broken. If you notice the tops of the teeth are missing you will need to replace the chain.
What type of chainsaw chain cuts the fastest?
A full chisel chain is a chain with square cornered teeth, and they’re known for being the fastest cutting blade shape available. A full chisel chain also has a higher number of teeth than other chain options(full chisel is also known as a standard chisel chain).
Is it worth sharpening a chainsaw?
Sharpening your chainsaw chain is definitely worth it as a sharp chainsaw chain is easier to work with. It takes less effort to cut through wood and your chain will make cleaner cuts with sharp blades. A chainsaw chain can be sharpened multiple times without much of a cost.
Does cutting wet wood dull a chainsaw?
Does Cutting Wet Wood Dull a Chainsaw? Using your chainsaw to cut through wet wood will not dull the chain any faster than using it for other types of wood. When you think about it, your chainsaw chain is already wet. True, it is not wet with water.
Is it normal for a chainsaw bar to get hot?
It is normal for the blade of your chainsaw to produce some heat. But it should not overheat or smoke. If you notice any overheating or smoke coming out of the blade, you should stop its use at once.
Why does my chainsaw chain stretch so fast?
Why Does My Chainsaw Chain Get Loose So Fast? One of the most common reasons why the chainsaw chain gets loose so fast is because of wear off caused by time and usage. If you are using an old chainsaw, you will notice that the chain gets loose very frequently thanks to wear on both the chain and the sprockets.
Do chainsaw chains stretch over time?
Over time, the chain on your chainsaw will become loose, and new chains will stretch a lot more when you are breaking them in. You need to pay attention so that you can tighten a loose chain before you turn the chainsaw on, as loose chains are dangerous.
How many times can you sharpen a chainsaw chain?
Cutters can be sharpened up to 10 times or more before the chain needs replacing. If your cutters are worn unevenly after a few sharpenings, a professional can regrind them to uniform shape. If you use the same chain for a few years, then buy a new one, the new one won’t mesh smoothly with the sprocket and bar.
Why do chainsaw bars bend?
A saw that has had one side of the chain nicked on a rock or dulled in the dirt will cut in a circle. A chain that has been sharpened differently on one side of the chain than the other will cut in a circle. A bent bar might cut crooked or straight, but, it will get hung up in the kerf.
Can you drill holes in chainsaw bar?
Re: Drilling a Chainsaw Bar Drilling that bar may not be as difficult as you think. It will be best if you use a drill press, start with a pilot hole, and then drill to the size you need. Make sure you have a sharp bit, run at the lowest speed you can, and use cutting fluid.