This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil or an inferior type of oil that is being slung off the chain and not lubricating. A properly sharpened chain will require little pressure be applied to have it cut correctly.
First things first, we have to figure out why and how the chainsaw chain or chainsaw blade smoking. If the chainsaw chain is over tightened, it might cause overheating and smoke build-up in the bar area of the chainsaw. Ensure a proper chainsaw bar and chain sizes that fit your chainsaw itself.
There is a distinct difference between a smoking chainsaw chain and a smoking engine. The chainsaw chain is the hardest working component on your chainsaw so it’s no surprise to have it show signs of stress. Your chainsaw smoking when cutting is a sure sign the chain needs a close inspection.
why is my chainsaw blade smoking Related Question:
Does a dull chainsaw blade smoke?
Chainsaw Blunt or Dull A blunt chainsaw will start to kick out smoke as it generates friction against the wood cutting surface. With experience, it’s easy to tell when your chain is getting dull. A sharp chainsaw chain will cut out large chips of wood and cut smoothly.
Why is my chainsaw blade burning the wood?
Your chainsaw burns wood because of poor lubrication Lubrication allows the mechanical parts to coordinate much better by avoiding a phenomenon of friction which risks causing traces of burns. This is one of the main reasons that your appliance gives off too much heat and that the wood burns.
Should a chainsaw blade get hot?
It is normal for the blade of your chainsaw to produce some heat. But it should not overheat or smoke. If you notice any overheating or smoke coming out of the blade, you should stop its use at once.
Why is my chainsaw blowing white?
Why is my chainsaw blowing white? While black smoke is caused by the burning of more fuel than air, blue or white smoke is generally caused by the burning of excess oil.
Why is my chainsaw blade smoking and not cutting?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
Why does my chainsaw overheat?
Common reasons behind chainsaw overheating are a wrong oil/fuel mixture, a blocked or clogged exhaust. It is also possible that the air filter is clogged. Or you are using a dull chain. If you are using your chainsaw for an extended time, or it is not powerful enough for the job, it can also overheat.
Why does my chainsaw chain spark?
The tension not being right is perhaps the most common reason a chainsaw sparks. If the tension is not right, it means that there is too much free moving space between the bar and the chain. When you are running it, the two will collide, and you will notice the sparks spontaneously.
How long does a chainsaw blade last?
The lifetime of a chainsaw chain has no fixed limit and depends on usage and maintenance. The chain should last many years; 5-6 years should be no problem. However, if the chainsaw chain is used properly and taken care of, it can last way longer.
Why is my Husqvarna chainsaw overheating?
The cylinder and starter both contain air intake areas that pull cool outside air into the engine when it’s running. If dust, wood chips or other material blocks these systems, the engine will start to overheat.
How often should I change my chainsaw chain?
The chain sprocket must be replaced if the depth of the wear marks reaches about 0.5mm, i.e. the wear limit. A seriously worn chain sprocket can cause the chainsaw chain and guide bar to wear at an increased rate, as well as reducing cutting performance too, so it’s important to keep an eye on.
Is it worth sharpening a chainsaw chain?
Sharpening your chainsaw chain is definitely worth it as a sharp chainsaw chain is easier to work with. It takes less effort to cut through wood and your chain will make cleaner cuts with sharp blades. A chainsaw chain can be sharpened multiple times without much of a cost.
How many times can a chainsaw chain be sharpened?
Cutters can be sharpened up to 10 times or more before the chain needs replacing. If your cutters are worn unevenly after a few sharpenings, a professional can regrind them to uniform shape. If you use the same chain for a few years, then buy a new one, the new one won’t mesh smoothly with the sprocket and bar.