If the operator has repeatedly been trying to start the chainsaw through the recoil starter system, they may have accidentally flooded the engine with fuel. If you believe fuel has flooded the chainsaw engine, pull the starter cord several times while holding the throttle, dry and replace the spark plug, and then try starting the chainsaw again. Gasoline will start to deteriorate if left unused and sitting, so if the chainsaw hasn’t been started in a while, be sure to check that old fuel is not collecting inside the chainsaw.
Here, we look at the top 11 reasons why your chainsaw won’t start. Another common reason a chainsaw won’t start is that the sparkplug is old, dirty, damaged or not correctly attached. If the temperature is too low, it can make it hard to start a chainsaw.
The question of why won’t my chainsaw start can be very hard to answer since the smallest thing can make a perfectly fine chainsaw go from working to being a large paperweight. If a chainsaw sits for a long time and wasn’t stored properly it can cause you all kinds of headaches and be a reason your chainsaw won’t start. The carburetor of a chainsaw is important and can be the reason that the chainsaw won’t start and the fix can either be simple or expensive.
why is my chainsaw not starting Related Question:
Why does my chainsaw not run?
There are many factors that can stop your chainsaw from running, including a bad spark plug or dirty air filter. There are simple problems: a broken fuel line, bad fuel, wrongly calibrated high-low adjustment screw. Also, more complex issues like a damaged carburettor or an engine compression problem.
How long to wait if chainsaw is flooded?
Many people wonder if a flooded chainsaw will fix itself? The answer is yes, but not always. By letting the chainsaw sit for about 20 minutes it will allow some of the fuel inside the engine to evaporate.
Why is my Stihl chainsaw not starting?
Dirty or clogged fuel tanks, dirty fuel filters and lines, loose fuel hoses, dirty air filters and a dirty carburetor can all restrict fuel flow. Check, clean and replace all the fuel system parts before moving into the internal engine, as gas problems create a majority of starting problems.
How long does a spark plug last in a chainsaw?
A poorly functioning engine in a Stihl chainsaw can mean more work for the operator and can even be dangerous. Consequently, Stihl recommends replacing the spark plug after every 100 service hours.
What causes chainsaw to flood?
There could be various causes: incorrect fuel mixture, carburation not calibrated properly, or a wet spark plug. In spite of their power and robustness, chainsaws are actually rather delicate machines that require careful and precise maintenance at every stage of their life cycle.
Will a flooded engine fix itself?
Will a flooded engine fix itself? No. You have to take appropriate measures to restore the fuel and air balance in your car’s engine.
How do I know if my chainsaw spark plug is bad?
If it’s not producing any sparks at all, your chainsaw needs a new plug. If there are only a few sparks coming out of one side of the electrodes but none on the other side, it’s not bad enough for you to worry about, but it will affect your performance.
How do you clean the carburetor on a chainsaw?
Let the chainsaw run at low RPMs/idle for a while. This is to let the cleaner run through the carburetor, the fuel lines, and the idle engine. The cleaner will wipe remove the gummy residue blocking the components to create a clean passageway for the air and fuel. As the RPMs begin to increase, turn down the idle knob.
What does a choke do on a chainsaw?
The choke position increases the richness of the air and fuel mixture the carburetor sprays into the cylinder. With the master control lever in the choke position, the flow of fuel into the engine increases and the flow of air decreases.
How often should you tune up your chainsaw?
Obviously this depends to some degree on how often and how heavily you use your chainsaw but experts generally recommend you get a professional service or check-up from every few months for heavier use to at least once a year for light use.
What kind of spark plug does a chainsaw use?
The NGK BPMR7A and the NGK CMR6H are the two spark plugs used in Stihl chainsaws.
How long to wait if engine is flooded?
Perhaps the best remedy for a flooded engine is time. Simply open the hood of your car and let excessive fuel evaporate for as long as you can. After about 20 minutes try starting your car again without hitting the gas pedal.
How do you fix a flooded engine?
To fix a flooded engine, you basically want to get the air to fuel ratio back to its usual balance. You can first try to simply let the excess fuel evaporate. Open your hood and wait a couple minutes before you try to start your car again. And when you do start it back up, make sure you aren’t pushing on the gas pedal.
What does a flooded engine sound like?
You can tell if your engine’s flooded when you spot these signs: Very fast cranking (the engine sounds different when you turn the key – usually a ‘whirring’ sound) A strong smell of petrol, especially around the exhaust. The car doesn’t start, or starts briefly and cuts out again.
Can flooding engine ruin spark plugs?
In worst cases, the excess fuel can foul spark plugs, sometimes necessitating their cleaning or replacement before the engine will start.