Kickback happens when the saw blade binds or stalls suddenly in the wood and the saw gets driven back toward you. So the key to preventing this is to make sure your blade doesn’t bind in the wood.
I thought it would be good to put together an article on handling circular saw kickback and throw in some additional safety tips that will make your experience better with these valuable tools. Kickback happens when the saw blade binds or stalls suddenly in the wood and the saw gets driven back toward you. In the comments field, feel free to share any close calls or other tips you might have regarding kickback or circular saw safety.
Overusing a saw results in the overheating of saw blades. Overheating might be the result of using a dull or edgeless blade, extensive rubbing of the saw on the board, using the saw so abruptly or so slowly and improperly adjusted saw. The circular saw consists of two handles i.e., front and back.
A kickback happens when you saw a piece of wood and suddenly the blade binds or the board that you are cutting bows downward, this will pinch the blade, the blade will suddenly stop and the circular saw will be left off and come back in your direction. Kickback happens when the saw blade binds or stalls suddenly in the wood and the saw gets driven back toward you. The saw is more likely to bind and kick back if the blade is too deep.
HOW TO PROPERLY USE A CIRCULAR SAW AND PREVENT KICK BACK. Among professional tradesmen, on the farm, around the house and in the vocational shop, the circular saw is probably the most commonly used power saw, and perhaps the most commonly abused. PREVENTING PORTABLE CIRCULAR SAW KICKBACK. Kickback is a sudden reaction to a pinched blade, causing an uncontrolled portable tool to lift up and out of the work piece toward the operator. Above information taken from THE TOOL GURU: How to properly use a Circular Saw and prevent kick back.
why is my circular saw jumping Related Question:
What causes saw kickback?
Kickback occurs when the teeth of the saw blade, moving at tip speeds of 120 miles-per-hour impart sufficient force to cause the workpiece to move in a violent and unexpected manner. Skil saw kickback tends to throw the saw back at the operator, its blade often running over fingers as it moves backwards.
What causes Miter kickback?
Sometimes when things go wrong the miter saw can throw the workpiece in random directions. This phenomenon is called a kickback. In simple words, a miter saw kickback is when the blade can’t cut the piece and it recoils the piece. It can be extremely dangerous as the blade turns at an insanely faster speed.
How can you tell if circular saw kickback might happen?
Kickback happens when the saw blade binds or stalls suddenly in the wood and the saw gets driven back toward you. So the key to preventing this is to make sure your blade doesn’t bind in the wood.
Why are my circular saw cuts curves?
A faulty circular saw is likely to have issues such as an unstable blade or a warped blade edge. The problem could also be the way you operate the saw. If you do not operate the circular saw properly, it will not cut straight. Let’s discuss several causes why your circular saw might not cut straight.
How do you keep a circular saw from binding?
Avoid circular saw blade binding But cutting a long board in half is different. You can hold one end, but the other must be free to drop or the blade will bind. The trick is to allow the cutoff end to drop slightly, but not so much that it completely snaps off before the cut is complete.
What is chainsaw kick?
Kickback is the term to describe the unexpected upward motion of the guide bar. Kickback occurs when the end portion of the nose of the bar (the kickback zone) strikes an object and the chain momentarily snags, or is pinched.
What is the space between two protruding teeth on a saw blade called?
Gullet (handsaw) The space between a saw’s teeth, where the saw dust is carried out. It is an equilateral triangle, just like the file that shapes the teeth.
Why is my hand saw sticking?
The wood you are sawing is closing the kerf and pinching the blade, Your cut isn’t straight, The set of the saw teeth is not large enough, so the kerf created by the blade isn’t wide enough to allow the saw room to pass without undue friction, or.
Can you cut curves with a circular saw?
Circular saw technique The first tool that comes to mind for cutting curves is a jigsaw, but if the curve is gradual, try a circular saw instead. It’s surprisingly quick and easy to cut a smooth curve with a circular saw. This method is for cutting rough curves. Don’t try to make furniture with this technique.
Can a circular saw blade break?
Making sure your saw blade is working properly is the best way to reduce downtime and increase production. There are many common causes that can cause blade failure from blade selection to cutting speeds, feed rates and improper break-in, to maintenance problems and more.
Why won’t my circular saw cut all the way through?
Here are some reasons your circular saw keeps stopping: Make sure your work piece is properly supported so it doesn’t pinch the blade which could also cause kickback in addition to stopping. Damaged, warped, loose or dull blade. Motor malfunctioning or overheating. Cable problems like frayed cord or weak connection.
Why is my circular saw stopping mid cut?
The circular saw stops in the middle of work when the blades of the saw are dull or damaged and are not functioning correctly. Moreover, it can also stop working when the motor of saw is not working properly. However, there could be some other reasons like cable issues, voltage issues etc.
Why are kickbacks unethical?
Kickbacks come in many shapes and sizes. They come as gifts, money, credit, or anything of value. This is a corrupt practice because it interferes with a person’s ability to make unbiased decisions.
Are kickbacks embezzlement?
After coming into the government, he started taking 10% of all major contract investments before he would approve the contract. However, kickbacks differ from other forms of corruption, such as diversion of assets, as in embezzlement, because of the collusion between two parties. Kickback schemes can be pervasive.
Why is my circular saw burning the wood?
Pushing the stock through the saw too slowly is a common cause of saw blade burn. Sometimes a blade that feels dull might only be dirty. If wood pitch resins build up behind the teeth of the blade, the cutting speed will slow down, increasing the chances for burns. Commercial blade cleaners are sold for this purpose.
