Whenever you are tiling a wall or floor you will probably need to cut some of the tiles to fit around furniture, or an obstacle such as a toilet or a pipe. Porcelain or natural tiles are more delicate than ceramic tiles, which makes them difficult to cut with a normal tile cutter. These can cut tiles up to 25mm thick and have a fine blade to prevent chipping.
For more tips, including how to trim a tile with a wet saw, read on! Cutting Porcelain Tile with a Tile Cutter This is a tool frequently used to cut ceramic tile, but it can also be used with porcelain tiles. Because porcelain is harder and more brittle, a tile cutter can be somewhat more difficult to use on porcelain tile.
You can cut tile faster, easier, and with more precision than manual tile cutters. Regardless of the kind of tile you’re cutting, the best method is to cut with the front of the tile facing up. How to use a tile cutting machine Mark up the tile and insert it into the machine so that the mark is in line with the guide.
A wet tile saw is a small stationary power saw used to cut ceramic, porcelain, and stone tile. The parts of a wet tile saw can differ a bit, depending on the manufacturer’s design, but most of the basic DIY-level wet saws resemble small table saws. As the tile clears the blade, turn off the saw and wait for the blade to fully stop before removing the tile from the bed of the saw.
wickes wet tile cutter instructions Related Question:
Can I put a wood blade on my tile saw?
Can a Wet Tile Saw Cut Wood? Though a wet tile saw may resemble a table saw, it is not designed to cut through wood. It is equipped with a diamond-edged, carbide blade that is different from that of a table saw. As well, this tool spins the blade in the opposite direction of a table saw.
Do you cut tiles face up?
Regardless of the kind of tile you’re cutting, the best method is to cut with the front of the tile facing up. The front is the side that will be exposed once you lay the tile. This method ensures the smoothest finished edge on the tile with the least amount of chipping.
Why is my tile saw binding?
Because the saw is forcing a groove into the tile there is a huge amount of friction caused. Friction generates heat, and if the heat is allowed to build up it can cause the saw to bind up and stop cutting.