Extremely powerful: The 795 motor in the portable table saw allows it to run at full power for an extended period of time and cut through a variety of tough materials with ease.
Angle adjustment ruler: with a range of 0-45 degrees, it can accommodate your multi-angle cutting and grinding needs.
Providing a protective cover for a large area of gear is essential for your safety.
The machine height adjustment button can be used to effectively control the distance between the blade and the table surface.
Low noise: Although this mini hobby table saw is powerful, the sound it produces is extremely low; the working noise is approximately 80 decibels.
It comes with two blades, and before using them, please carefully read the instructions.
Features.
Extremely powerful: The 795 motor in the portable table saw allows it to run at full power for an extended period of time and cut through a variety of tough materials with ease.
Angle adjustment ruler: with a range of 0-45 degrees, it can accommodate your multi-angle cutting and grinding needs.
Providing a protective cover for a large area of gear is essential for your safety.
The machine height adjustment button can be used to effectively control the distance between the blade and the table surface.
Low noise: Although this mini hobby table saw is powerful, the sound it produces is extremely low; the working noise is approximately 80 decibels.
Materials that can be used include soft metal, thin stainless steel sheet and iron sheet, wood, plastic, acrylic, bamboo, and other similar materials.
Specification.
Model: 795 type household micro cutting machine (also known as a household micro cutter).
Input voltage ranges from 110 to 240 volts; output voltage ranges from DC12 to 24 volts.
Max. rated power: 250/360 watt.
No-load speed: 5800 revolutions per minut.
Model number of the motor: 795 moto.
4 inch saw blade with an inner diameter of 20/16m.
Backing: 45-degree angle that can be adjuste.
Synchronous wheel: synchronous wheel with high precision (XL synchronous wheel.
Belt: Extra-long belt that is durable.
Dimensions: 180*150*110m.
26-29 mm is the thickness of the cutting blade.
Things that need to be addresse.
1.Check the cutting material carefully before using to ensure that it is compatible with the type of saw blade you have chosen; it is strictly forbidden to use the saw blade on incompatible material in order to avoid damaging the saw blade.
2) The matching error between the motor shaft and the center hole of the saw blade must be less than 0.1mm when the motor is installed.
(3) Take into consideration that the rotation direction of the saw blade must match the rotation direction of the table saw motor; otherwise, the blade will not be able to cut if the table saw motor does not rotate at the normal speed.
4.Use of side pressure and curve cutting during the cutting operation is strictly prohibited; the blade must be stable in order to avoid impact on the blade, which could result in a dangerous situation.
It did not come with any instructions. The switch has been placed in an inconvenient location (on top of the handle). It should be positioned lower and in a more secure location. The blade guard should be designed to provide protection both in front of the blade and at the top of the blade. It is possible that fingers will be injured if a drive belt is not protected by a guard at the bottom of the drive unit. The handle is of poor quality. The vice that holds the wood requires an allen wrench, but it should also have a handle that can be used to loosen and tighten the material that is held in the vice. The design of the vice prevents the material from being evenly distributed within the unit. After it has been leveled, it needs to be held and tightened. It is not recommended to place the power cord on top of the unit, where the cord will constantly move. It should be located at the bottom of the unit.
