“Our famous Wood Slicer bandsaw blade cuts smoother and quieter than any other resawing blade on the market. Its outstanding performance is due to its 3-4 tpi variable tooth pitch design, in which uneven spacing between the teeth nearly eliminates vibration during a cut. The Wood Slicer’s tooth pattern damps harmonic resonance extremely effectively; the result is superlatively smooth cuts and much, much quieter operation than ordinary blades. In tests here at the store, our new Slicer averaged 8 decibels quieter than a popular brand-name 1/2″, 3-tooth blade cutting 2″ walnut, and 14dB quieter in 6″ walnut. Unless you’re actually fond of listening to a bandsaw blade scream though thick stock, our new blade design will be the best you’ve ever heard on your bandsaw. Testing the blades here at the store, we’ve produced 9″ wide veneers no thicker than 1/32”, clean enough for glue-up and ready to begin sanding at 100 grit.
02-25-2010, 9:09 PM #1 Review of the Woodslicer bandsaw blade – WOW! About a week ago, I asked for some help improving the smoothness of the pieces coming off my Laguna LT14SE bandsaw. Most suggested a better blade than the cheap Laguna steel blade I was using. 02-26-2010, 7:56 AM #11. But it did not take very much figured maple before the cutting quality dropped significantly – and not much after that until blade was pretty useless.
woodslicer bandsaw blade reviews Related Question:
What is a skip tooth bandsaw blade good for?
Skip tooth blades have widely spaced teeth at a 0 degree rake angle to prevent clogging when cutting soft wood, non-ferrous metals and plastics. Hook tooth blades have a deeper gullet—that is, larger teeth—and a positive 10 degree rake angle. This helps the blade to feed into the material more aggressively.
Should you lubricate a bandsaw blade?
Using an incorrect lubricant in your application has the potential to harm your blade, damage the material being cut and clog the machinery. Band saw blade lubricant is important, too, to getting smooth cuts. A reduction in friction means reduced vibration, smoother operation of the blade and a more consistent cut.
Are Lenox bandsaw blades good?
Lenox makes the best band saw blades period. Best for all metal types and cuts cool. With the Harbor Freight hand bandsaw and table setup in the shop, it is very easy to cut metal bar, tube and pipe. Blade usually last a while unless an errant piece of metal causes a bind and results in a breakage.
How long should a metal bandsaw blade last?
On average your bandsaw blade should last 6 months to as long as a few years depending on what your cutting with it. Make sure to match your blade strength and quality to the project and material your cutting.
Is more TPI better?
Woodworkers quickly learn that the number of teeth-per-inch (TPI) on the blade has a big impact on the quality of a cut. The general rule of thumb is “the more TPI, the smoother the cut.” The true answer, however, is just a little more complicated than that, as you’ll learn once you understand how saw teeth work.
How tight should my bandsaw blade be?
The blade should deflect no more than 1/4 in. A good place to begin is to tension the blade until the meter reads proper tension for the next wider blade. For example, if you’re tensioning a 3/8-in. blade, I would set the scale to 1/2 in.
What’s the difference between bandsaw blades?
Bandsaw blades differ in thickness, width, length, and tooth configuration. Length varies by machine, but the size of your saw’s wheels typically determines thickness and width: Smaller machines (9–12″ wheels) need thinner blades to prevent breaking the welds. They also accept only narrow blades, often 1⁄ 2 ” or less.
What does TPI mean on a bandsaw blade?
You must select the correct Teeth Per Inch (TPI) for the thickness of material you are cutting.
What oil do you use for a bandsaw?
BAND SAW KLEENKOOL is a premium quality oil specially formulated for the unique problems associated with high speed band saws. BAND SAW KLEENKOOL is engineered to lubricate, cool, and clean residue from band saw blades.
How do you maintain a bandsaw blade?
You can help keep your bandsaw in the best condition by following a daily cleaning and lubricating routine, including lightly oiling the bearings where possible, and using an airline to blow away any swarf that has built up in the blade and mechanism.
How many times can a bandsaw blade be sharpened?
It often makes sense to replace a dull blade with a new one, but you can sometimes get the best value out of merely sharpening an old blade instead of replacing it altogether. You should typically be able to get two to three sharpenings before you need to change your blade completely.
Are bandsaw blades worth sharpening?
Since a carbide-tipped bandsaw blade will cost well over $100, spending a third of the cost of the blade (or more) to get it sharp and working like new again can make financial sense. However the majority of bandsaw blades, the Wood Slicer included, are not worth spending money to have sharpened.
What does 32 TPI mean?
TPI is an acronym for Teeth Per Inch and is a common measurement to be detailed on saws. As a general rule, the more teeth per inch a saw has, the neater the finish will be, but the slower the saw will cut. The fewer teeth per inch, the faster the saw will cut but the rougher the finish will be.
What is stainless steel TPI?
A blade has a minimum of 2-3 TPI per inch. When cutting harder materials like stainless steel it is recommended to use one pitch finer than you would use on mild steel.
What is the best TPI for cutting metal?
Cutting thinner metals, including sheet metal, requires a finer cut. Use 18-24 TPI bi-metal blades. For thicker metals such as steel pipe, angle irons, or tubing, use 14-18 TPI bi-metal blades. For aluminum, an 8-10 TPI blade is best.