Its name is the Drill Press Spring.
In this case, the length is 1540mm/60.6inch; the spring diameter is 57mm, the material width is 10mm, and the material thickness is 1mm.
Inner Mounting Type : Hook; Outer Mounting Type : Hoo.
It is made of metal and weighs 185g.
Package: 2 x Drill Press Sprin.
Spring Steel is the material of choice for this project.
After that, chemical blackening.
Material is 1mm thick.
Material Width : 10m.
Spring length: 57m.
Expand the length: 1540mm / 60.6inch.
The inner mounting type is a hook.
Outer Mounting Type : Hoo.
In this package, you will find.
Drill Press Spring .
Description: 1.The drill press quill return spring is good replacement for many existing quill spring drill presses, this is the chrome housed spring that returns the quill to the top after you have completed drilling.
Used to all kinds of vacuum cleaner coil spring, volume tube coil spring, safe coil spring and so on.
2.Chemical Blackening, the performance of the product form oxide film, isolate the air, prevent rust.
3.Pay attention to safe when installing springs. Do not loosen the wire of fixed springs! When installing, install the spring with a fixed wire directly into the spring , and the wire will slide out.
Installed 1 and have a spare
