The table is good for the Mini Drill and drill brackets. Other machines that are good enough can also be used.
Several adjustable dovetail slots made of aluminum alloy make up the work table, which makes sure there is enough space and is accurate.
With the working table, you get a 3 # Hexagonal wrench, a piece of art, and 30 M8 screws.
There is no change. The handwheel turns in a circle of 1.50 mm. It is 0.05mm thick.
Adjustable in the X direction: 190mm, in the Y direction: 67m.
The table is good for the Mini Drill and drill brackets.
Other machines that are good enough can also be used.
The work table is made up of a number of adjustable dovetail slots made of aluminum alloy.
can make sure there isn’t a lot of space and that everything is correct.
There is a 3 # Hexagonal wrench that comes with the work table.
One of the best M8s in the world * 3.
There is no change. The handwheel turns in a circle of 1.50 mm. It is 0.05mm thick.
It can be moved in the X direction: 190mm.
For the Y direction: 67mm.
Package comes with.
1 Pc of Milling Table of the Medium Size.
I looked up reviews of this vise on Google. I saw them. The 6300 vise seemed to be the one that people were most upset about. and it looked like it was less money. So I tried the 6330 version. As good as I thought it was. Neither warbles nor holds anything.
I can use it right away. None of the time I used it, I put any kind of lubricant on it at all. works fine. A little tight. I think if you lubricate it and change the set crews, this will work. used it to hold my upper receiver. I then drilled four holes in a straight line through the upper receiver. They’re right on. This vise held the zero, which means it did its job.
I like the 6330 version because it’s cheap and good.
