To fill the 6.8L tank to 300BAR, it takes only 38 minutes. This is great for air impermeability tests, pressure proof tests, and more.
Make sure you have enough water for the cooling system. It is best if there is a vat of water to get better cooling.
It has two stages of compression and two water-oil separators to make sure that its performance doesn’t change.
HIGH QUALITY: This air compressor pump is made of alloy air cylinders and high-quality parts that will last for a long time. Air compressor: We are very happy with our air compressor. We also love our customers very much. We’ll take any suggestions or returns, and you can just get in touch with us for the best customer service.
Please note that you can’t work for more than 30 minutes at a time, and the temperature of the machine can’t go above 80 degrees Celsius.
If the working time is too long or the temperature is too high, the device will shut itself down. If the machine gets too hot, it will automatically shut down. Take a break for a few minutes, and then start again.
This Yongheng compressor pump is one of the best things made by Yongheng. Our company is an official partner of Yongheng. We try to give our customers the best products and service. If you’re not happy with your purchase, don’t hesitate to get in touch with us.
About Shipping: All orders are expected to arrive in 4 to 8 days (We offer a free expedited delivery service at checkout.
Please pay attention.
1. The temperature sensor is only compatible with AG13, 357A, CX157, and LR44W 1.5V batteries. Batteries are not included and need to be put in by the person who wants to use the sensor.
If you use this product in a humid or flammable place you should not do so.
3. It’s not a good idea to remove and fix things without permission.
4. Make sure that your socket can handle more than 8A of electricity, or the circuit could get burned out.
5. Do not touch the head of the machine when it isn’t running.
In this case, the machine will shut itself off when the pressure gets to 30MPA or 300bar.
7. To keep the temperature of the cylinder stator in check, you should change the cooling water every 30 minutes to keep the temperature down.
Keep an eye on the engine oil and make sure it stays above the red dot. Change the oil if the color changes.
9. Make sure you use the standard oil for ISO VG46 and AW46, which is called “standard oil..
A product’s “specifications”.
110V is the voltage.
The power is 1.80KW.
In this case, it is made of alloy.
There are 14 inches by 7 inches by 14.6 inches.
It can work at a rate of 50 L/min.
300BAR / 30MPA / 4500PSI is the working pressure.
It says: Package Lists.
1 The main machin.
The first female hose is number 1.
Air Coc.
There is a water pump.
1 Parts that wear ou.
2. Water Pipe.
One of the two pressure relief screws.
To put in a PCP rifle, I bought this to fill it up.
In the box, this looked good. This does not come with oil. I added a quart of oil (NOTE: THIS DOESN’T COME WITH OIL) and hooked up the water pump. People don’t want to use this pump because it costs $5. For about three gun fills, it worked well. For $25, I bought a new water pump that pumped four times as much water. A short time later, after about one or two PCP gun fills, the pump began to leak a lot. It didn’t work, even though I used silicone tape and tried to tighten all of the connections. I ended up giving it back and now I’m having a heart attack with my hand pump.
