1.Maxillofacial grinding is performed with white stones. (R.P.M. 8000-12000/Min is recommended..
To prepare the surface for polishing, pink silicone polishers are used (RPM 8000-10000/Min is recommended).
In order to achieve a high gloss finish, white rubber diamond polishers are used. (R.P.M. 6000-8000/Min is recommended..
4.Features: rapid cutting, long service life, low heat, high production, and excellent polishing effect.
Usage.
1.Exceptional pure alumina sand reduced vibration to the porcelain teeth occlusion and adjacent surface finishing while also avoiding carbon pollution.
2. Because of the excellent heat dissipation properties of silicon, the porcelain will not crack.
3. Polishers with diamond grains provide an effective polishing effect while remaining wear-resistant and long-lasting.
4. The high gloss polishing effect can reduce the need for secondary rework due to color deviation and the risk of porcelain brittleness.
Note: When polishing the near edge of the gold crown porcelain junction, please keep in mind that the pressure of the hand, the grinding direction, the speed, and the avoidance of porcelain collapse, porcelain crack, and crack phenomenon are all important considerations. Prepolishing is required in order to lay the groundwork for high gloss polishing.
Content.
CW3114m x 1 = CW3114.
SH3143m x 1 = SH3143m .
SH3413m x 1 = SH3413.
SH3203m x 1 = SH3203m x 1 = SH3203.
RD3136 x 1 = RD313.
RD3416 x 1 = RD3416
