High grinding speed (25000RPM) and a powerful motor are included.
The collet sizes are as follows: 1/8″ (6mm) and 1/4″ (6mm) (3mm).
The extended shaft provides easy access to a difficult-to-reach working area.
The air filter is used to keep the air clean and to ensure that the grinder operates properly.
Pressure at work: 90PSI; air inlet size: 1/4-inch; air consumption: 4CFM.
Thank you for visiting our store!:.
ZHONG AN AIR TOOLS is a professional pneumatic tool shop located in Zhong An, China. We provide decent tools at a reasonable cost to our customers.
If you have any questions, please do not hesitate to contact me. I will respond to you within 24 hours and do everything in my power to assist you.
Description of the Produc.
ZHONG AN air die grinder with 1/4″ and 1/8″ collets on an extended long shaft.
Lightweight, low-noise, but powerful motor (free speed: 25,000rpm), and long service life are some of the advantages of this model.
It is simple to control the speed and is even suitable for female users.
The extended shaft provides convenient access to those difficult-to-reach areas.
The rear exhaust can be used to direct airflow away from the working surface.
Applicatio.
Grinding wood, furniture, sculptures, metal, and stone with a variety of grinding bits is simple with this tool. Solder joints and rust spots on metal products can be easily removed with this tool.
Specificatio.
– Maximum free speed is 25,000RPM.
– Collet sizes: 1/4 inch and 1/8 inc.
The operating pressure is 90 PSI.
– Air consumption is 4 cubic feet per minute (CFM).
1/8-inch airlet size.
– The recommended airhose diameter is 3/8-in.
Included in the package i.
air die grinder (one unit).
– 2 hex wrenche.
collect 1/4 inch and 1/8 inch; collect 1/4 inch and 1/8 inc.
When I screwed the in air line coupler into the tool’s coupler, the tool seemed to pull down on the end, resulting in failure of the air inlet threads being blown off the tool, rendering it non-functional. Despite the fact that it appears to be a good piece of equipment overall, it has what I believe to be a design flaw on the air coupler that threads into the tool.
