350 husqvarna chainsaw parts Related Question:
What took place of the Husqvarna 350 chainsaw?
Husqvarna 450 Rancher The 450 rancher is the bigger brother of the 350. It’s larger, more powerful, and perfect for professional outfits as well as use at home.
What size bar is on Husqvarna 350?
Chainsaw Bar & Chain Combo Rplm fits Husqvarna 339 345 350 351 353 359 360 362 365 435 440 444 | 18″ Length .
What is the H and L on a Husqvarna chainsaw?
1. Locate the idle-speed screw and the idle-mixture screws on the side of the chainsaw. According to the manual for the Husqvarna 51 available at ManualsLib, the idle-speed screw is labeled “T,” the low-speed screw is labeled “L” and the high-speed screw is labeled “H.”
How much does a Husqvarna 350 cost?
The Husqvarna 350 is priced at an MSRP of $10,099.
What is the difference between .325 and 3/8 chain?
The . 325 may be smaller and faster, but it may not be your best bet for your everyday needs. The three-eighths-inch chain is durable and lasts longer than its smaller cousin. This makes it one of the more popular switches for chainsaw users who want to get more out of their saw.
Can I use a Stihl chain on a Husqvarna saw?
Unfortunately, you won’t be able to use Stihl chains on Husqvarna saws because of the difference in pitch sizes.
What is the T hole on a Husqvarna chainsaw?
The letter H stands for high speed, and this screw regulates the mixture when the saw is running at full speed, and you’re actually cutting something. The T screw regulates the mixture when the chainsaw is idling. All three screws have to be properly adjusted for the saw to work properly.
How do you adjust the idle on a Husqvarna 350 chainsaw?
L Screw – With the chainsaw still running, take a screwdriver and turn the L screw clockwise. Keep turning it until the engine almost stops turning. Next, begin to slowly turn the adjustment screw counterclockwise until you hear the engine idling smoothly.
What size is Husqvarna fuel line?
At about 24” in length, this line is usually long enough to do more than just one fuel system and works on most, but not all Husqvarna (brand names also included are Poulan, Craftsman, and Weedeater) 2-cycle equipment. This is a 1/8 in. fuel line for a Husqvarna 142, very hard to find.
Why is gas leaking from my chainsaw?
The fuel tank on your chainsaw is a plastic reservoir that stores fuel. The plastic can occasionally become cracked, and when this happens, fuel can leak out. There are several places on the fuel tank that can cause leaks, such as the grommet, the gasket, or the fuel cap.
How much does a Husqvarna FC 350 weight?
Weighing in at only 27.2 kg (59.9 lb) and churning out serious power, the engine in the FC 350 is designed with performance as a priority. It is also one of the lightest engines in its class.
What is the oil gas mixture for a Husqvarna chainsaw?
The correct mixing ratio for your Husqvarna is detailed in your product’s owner’s manual. But as a general guide, a fuel-to-oil ratio of 50:1 is recommended for Husqvarna products up to and including 75cc. That comes out to 2.5 fluid ounces of oil per 1 gallon of gas.
How much horsepower does a Husqvarna 450 have?
The pinnacle of Husqvarna motocross, the FC 450 uses advanced engineering techniques to not only draw 63 hp from the 450cc motor, but also position the engine shaft arrangements at the ideal center of gravity to vastly benefit handling and maneuverability.
Are .325 and 3/8 chains interchangeable?
You can replace a 3/8 Oregon PowerMatch nose with a . 325 PowerMatch nose on any length of Oregon PowerMatch bar you want. Then when you use up the . 325 chain just put the 3/8 nose and rim sprocket back on.
How do I identify my Husqvarna chain?
The model number of a Husqvarna chainsaw is printed on the side of the recoil assembly on the unit(eg. 455, 460, 372 XP). Husqvarna chainsaws also have a small metal plate stamped with the model number, part number, and serial number. The plate is typically located in one of four locations.