RS3 is an aggressive, fast-cutting, full-chisel chain but has a single-humped drive link to reduce kickback, and the cutter and tie strap design reduces vibration levels when cutting. The razor-edged, square-cornered cutter shape ensures minimum chain friction for an exceptionally smooth and clean cut in hard or frozen wood. RS3 chain typically cuts faster than RM chain, but requires careful sharpening and maintenance to continue to perform well.
S3 8AG. Optimised for maximum performance, Rotatech chains are fine-tuned to deliver the best cutting results possible. With over 6,000 models to choose from, Rotatech chains will enable your chainsaw to deliver better performance throughout its working life. In collaboration with professionals in the arboriculture industry, Rotatech chains have been tested and developed to ensure they optimise your output.
69 link chainsaw chain Related Question:
Does number of links matter on chainsaw chain?
Chainsaws are designed to use a specific size of bar with a specific chainsaw chain link count. For heavier jobs like felling trees or bucking logs, it might be better to have a longer chain with more links – but this will make it slower and less agile.
What does R and S mean on chainsaw chain?
R stands for rip, S stands for skip, R’s have more cutters but a skip chain is smoother and has less kickback. The number is the amount of drive links on the chain. All bars are stamped with the length, guage and amount of drive links.
What is the fastest cutting chain for a chainsaw?
A full chisel chain is a chain with square cornered teeth, and they’re known for being the fastest cutting blade shape available.
Is it better to have more or less drive links on a chainsaw chain?
The greater distance between links makes for more aggressive cutting. When a chainsaw chain’s pitch measurement is displayed on the tool, it is usually on the guide bar, towards the user-end of the tool.
How do you match a chainsaw chain?
To get the correct size, simply count 3 rivets on the chain and measure the distance between them from the centre points. Now divide this by half to get your size. As an example, three rivets that measure ½ an inch across divided by two gives you a pitch of a ¼ inch.
What’s the difference between 404 and 3/8 chain?
Secondly, the numbers 3/8″ and . 404″ refer to the pitch (distance) between the drive links – these are the bits on the chain that stick down and engage with the drive sprocket on the saw, and the sprocket on the roller-nose end of the bar.
What is the difference between a R56 and a S56 chainsaw chain?
The difference is the width of the chain track. S56 is . 050″ and R56 is . 043″.
How can I tell what pitch my chainsaw is?
To determine the pitch (chain size), you’ll need to measure the distance between any three consecutive rivets, then divide the result by 2. The rivets are the small, round pegs/studs that hold the chain segments together. Measure from the first to the third, then divide that number in half to get your chain pitch.
What is the most aggressive chainsaw chain?
404 chains are the most aggressive. The 3/8 is a more flexible size with adequate strength, low weight and substantial cutting speed. It can also can handle the power of a 50-100cc chainsaw engine.
What is a ripping chain?
Ripping chain is chainsaw chain designed specifically for cutting with the grain. Ripping chain is always micro chisel or semi chisel chain which features a re configured cutting angle of 10 degrees.
What chainsaw chain stays sharp the longest?
Husqvarna Chainsaw Chain 16″ . The x-Cut line of Husqvarna chains is also designed to stay sharp longer, so you can cut for a longer amount of time before the chain needs sharpening.
What chainsaw chains do professional loggers use?
Stihl is the most popular chainsaw for professional loggers. It has a long-lasting chain, and you can also enjoy the exceptional cutting speeds available with this brand of chainsaw. Additionally, the chains are high-performance, low vibration, and quiet in their performance.
Why does my chainsaw chain get dull so fast?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
How often should you change the bar on a chainsaw?
If you are looking for a general idea for how often you should replace a chainsaw bar, a rule of thumb is to replace the bar of your chainsaw once after you have gone through three chains on the same bar.
What does the gauge mean on a chainsaw chain?
The gauge of a chain refers to the thickness of its drive links. It is determined by measuring the portion of the drive link that fits into the groove of the guide bar. It is usually expressed in thousandths of an inch: . 050″ or . 063″.