Have a 75, A3 stamped on your drive link, and there are 58 drive links on the current chain or bar info is matched, then this chain will fit your saw. Do not use this saw chain unless you have experience and specialized training for dealing with kickbacks. A saw chain with reduced kickback potential may be available.
58 link chainsaw chain Related Question:
What does the number of links on a chainsaw chain mean?
If you decide to measure the pitch yourself, just remember to measure between the middle points of 3 rivets on the chain, and then divide the number by 2. So, for a 3/8″ pitch chain, the measurement between three links would be 3/4″ (. 75″), which is 3/8″ (. 375″) when divided by 2.
How do I know my chainsaw chain size?
To get the correct size, simply count 3 rivets on the chain and measure the distance between them from the centre points. Now divide this by half to get your size. As an example, three rivets that measure ½ an inch across divided by two gives you a pitch of a ¼ inch.
Does it matter how many drive links on a chainsaw chain?
For heavier jobs like felling trees or bucking logs, it might be better to have a longer chain with more links – but this will make it slower and less agile. Shorter chains can cut branches under two inches much faster than long ones because the short length of the blade doesn’t get caught up in them as much.
Are all 3 8 chainsaw chains the same?
Most saws use 0.325″, 3/8″, or 0.404″ pitch, with 1/4″ less common. Most consumer saws use a type of 3/8″ chain called “low profile”.
What is the difference between .325 and 3/8 chain?
The . 325 may be smaller and faster, but it may not be your best bet for your everyday needs. The three-eighths-inch chain is durable and lasts longer than its smaller cousin. This makes it one of the more popular switches for chainsaw users who want to get more out of their saw.
What size file do you use on a 3/8 chainsaw chain?
With that said, the Stihl 3/8″ chain is identical in size to Oregon and other brands which all recommend a 7/32″ file.
Are all 14 inch chainsaw chains the same?
The size of a chain saw’s chain does not always correspond to the size of the guide bar. Determining the correct size of chain for a chain saw with a 14-inch guide bar involves several factors, including the size of the drive lugs and their distance from each other along the chain.
How many links does a 14 chainsaw have?
Oregon S52 AdvanceCut Chainsaw Chain for 14-Inch Bar -52 Drive Links – low-kickback chain fits Dolmar, Ryobi, Echo and more.
How many links does a 18 inch chainsaw have?
0.050 Gauge 0.325 in. Pitch Chainsaw Chain, 72 Drive Links.
Can I use a .050 chain on .058 bar?
058 bar? You will not be able to make a straight cut to save your life. The chain will rock in the bar and accelerate the wear.
Are .325 and 3/8 chains interchangeable?
You can replace a 3/8 Oregon PowerMatch nose with a . 325 PowerMatch nose on any length of Oregon PowerMatch bar you want. Then when you use up the . 325 chain just put the 3/8 nose and rim sprocket back on.
Can I change the pitch on my chainsaw?
Yes, pitch does matter. If you change to . 325 chain you will also need to change the drive sprocket. If the saw has a floating rim then just change that, otherwise it is a new drum which may not be available.
What is a Picco chainsaw chain?
STIHL PICCO™ Micro™ 3 chain is a low-kickback, narrow kerf, smooth-cutting and low-profile chain ideal for small to mid-sized chainsaws with between 1.5 kW (2.0 bhp) and 1.9 kW (2.5 bhp). It performs equally well as compared to the PMM3 chain, with the only difference being a slight increase in weight.
What’s the difference between 404 and 3/8 chain?
Secondly, the numbers 3/8″ and . 404″ refer to the pitch (distance) between the drive links – these are the bits on the chain that stick down and engage with the drive sprocket on the saw, and the sprocket on the roller-nose end of the bar.
What is the difference between a R56 and a S56 chainsaw chain?
The difference is the width of the chain track. S56 is . 050″ and R56 is . 043″.