The fastest cutting chains are the ones that are suitable for the conditions in which you are cutting and sharp. In other words, a semi chisel chain in dirty conditions, a full chisel chain in clean, and so on.
An aggressive chainsaw chain is one that has a higher cutting speed than other chains, and usually has full chisel teeth on a full or skip chain. The main types of chain arrangements or sequences are full complement, skip chain and semi-skip chain. Experts say the best chainsaw chain for cutting firewood is the Husqvarna High Performance 18 inches, 0.05 gauge, 0.325 pitch chain.
If you want cutting speed, this post will show you how to choose the fastest cutting chainsaw chain with our detailed guide. We’re wholly impressed by the smooth cutting experience of this chainsaw chain, which is the reason we give it our Top Pick Award. This is the end of our comprehensive guide to the fastest cutting chainsaw chain and hopefully, you have figured out about your new chain.
In comparison to the semi-chisel chain, this chain has square-cornered teeth which makes it more aggressive when cutting. If the chain is cutting to the left that means the right teeth on the chain are longer, and vise versa. A skip chain has fewer cutting teeth than a conventional chain which means it won’t be dragging as many teeth through the wood you’re cutting.
what chainsaw chain cuts the fastest Related Question:
Does a ripping chain cut faster?
Ripping chains are slower as the finer cut and surface takes more time than regular cutting.
What is the most aggressive chain for a chainsaw?
404 chains are the most aggressive. The 3/8 is a more flexible size with adequate strength, low weight and substantial cutting speed. It can also can handle the power of a 50-100cc chainsaw engine.
Why does my chainsaw chain dull so quickly?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
What chainsaw chains do professional loggers use?
Stihl is the most popular chainsaw for professional loggers. It has a long-lasting chain, and you can also enjoy the exceptional cutting speeds available with this brand of chainsaw. Additionally, the chains are high-performance, low vibration, and quiet in their performance.
What is the longest lasting chainsaw chain?
Even more durable than standard chain is carbide-tip chainsaw chain. Carbide tips last longer than chrome and are not affected by heat. Because of these qualities, carbide chain is excellent for cutting objects that would dull standard chain quickly, such as railroad ties.
Does skip tooth chain cut faster?
A skip chain has fewer cutting teeth than a conventional chain which means it won’t be dragging as many teeth through the wood you’re cutting. Less drag on the chain means less power is needed to cut through the log. That means the motor on your saw runs faster which keeps it in a more efficient power curve.
What is full chisel chain?
A full chisel chain is designed for the fast cutting action. In comparison to the semi-chisel chain, this chain has square-cornered teeth which makes it more aggressive when cutting.
Is a full chisel chain the same as a ripping chain?
In reality ripping chain is a semi or micro chisel chain filed to 10 degrees rather than 30 degrees. Full chisel filed to 10 degrees tends to cause a lot of vibration when cutting planks with a chainsaw although some people do find a chisel cutter is better in certain woods.
Why do Loggers Run chainsaw bars upside down?
Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear.
What is the toughest chainsaw?
The new STIHL MS 881 is the world’s most powerful chainsaw in production today. Following on from the highly regarded MS 880 chainsaw, which was a favourite of foresters, the arboriculture industry and saw-mill operatives, the MS 881 was designed with the largest timber jobs in mind.
How long should a chain last on a chainsaw?
The chain should last many years; 5-6 years should be no problem. However, if the chainsaw chain is used properly and taken care of, it can last way longer.
How often should you flip the bar on your chainsaw?
Some professional loggers would advocate that you should flip your chainsaw bar at the end of every use, particularly when you are cleaning up. Others suggest a more relaxed approach advising that you flip the chainsaw bar only when you are changing your chainsaw blade.
Is it worth sharpening a chainsaw chain?
Sharpening your chainsaw chain is definitely worth it as a sharp chainsaw chain is easier to work with. It takes less effort to cut through wood and your chain will make cleaner cuts with sharp blades. A chainsaw chain can be sharpened multiple times without much of a cost.
How many times can you sharpen a chainsaw chain?
Cutters can be sharpened up to 10 times or more before the chain needs replacing. If your cutters are worn unevenly after a few sharpenings, a professional can regrind them to uniform shape. If you use the same chain for a few years, then buy a new one, the new one won’t mesh smoothly with the sprocket and bar.
Is McCulloch a good chainsaw?
Whether cutting firewood or felling large trees, all McCulloch chainsaws have strong engines, great ergonomics and superior durability. With a high chain speed, and a slimmed-down lightweight design McCulloch’s chainsaws are probably the smoothest chainsaws you’ve ever tried.