Go through the rest of the article, where we will take you through steps on how to put a chain back on a chainsaw-. Now, once the chain is set in the right direction, set the chain around the sprocket. Once done, put the housing on the chainsaw chain again.
In this article, we are going to show how to put a chain back on a chainsaw like a pro!!! Do not forget to grease the chain before you put it back on your chainsaw. Step 3 – Re-assign the Chain to its Bay Align the chain with the grooves of the bar while securing the chain around the sprocket.
how to put your chain back on your chainsaw Related Question:
What causes chain to come off bar on chainsaw?
Chainsaw chains come off the bar due to worn-out bars, worn-out sprockets, and wrongly set tension. You should also note that with continued use, chains lose their tension and hence are more likely to come off the bar when you least expect it.
Which way should a chainsaw blade face?
The direction of the chainsaw blade is always the same regardless of the type or model of chainsaw. So the sharp edges of the blade should always face the clockwise direction. If you check from the top, you will notice that the sharp edges are facing the direction opposite the chainsaw body or motor.
Which way does a chainsaw spin?
Chainsaw chains rotate in a clockwise direction, so the cutting edges should be facing away from the engine and to the right, on the top of the chain.