Homelite makes several products used for lawn care including hedge trimmers, lawn mowers, leaf blowers and chainsaws. Homelite offers two lines of chainsaws, gas-powered, for ease of maneuverability, and electric, with which you need not worry about mixing and handling gasoline. The two types of chainsaws are started in different ways because they use different types of motors.
how to start homelite chainsaw Related Question:
What causes a chainsaw not to start?
The chainsaw’s engine is flooded with fuel. A fuel issue is one of the most common reasons why a chainsaw won’t start. If the operator has repeatedly been trying to start the chainsaw through the recoil starter system, they may have accidentally flooded the engine with fuel.
What is the fuel mixture for a Homelite chainsaw?
The recommended fuel mixture is a 50-to-1 ratio of unleaded gasoline and two-cycle engine oil, and the manufacturer recommends the use of a two-cycle oil that contains fuel stabilizer to keep the mixture fresh if you are not using it immediately.
How do you adjust the carburetor on a Homelite XL chainsaw?
Adjust the Homelite chainsaw carburetor by turning the high- and low-speed screws as needed. Set the high speed screw by adjusting the screw marked “H.” Pull the trigger so that the throttle opens as wide as possible. Turn the screw to the left and note the engine performance.
What’s the fuel mixture for a Homelite XL chainsaw?
The Perfect Recipe The recommended 50-to-1 fuel mixture includes 2.6 ounces of a high-quality, two-cycle oil with added fuel stabilizers and 1 gallon of unleaded 87-octane gas. Homelite recommends using their brand of oils, specifically designed to work in any model with a 50-to-1 fuel ratio.
Are Homelite chainsaws any good?
The Homelite brand has a reputation for delivering affordable, functional tools with average homeowners in mind. This is on full display with the Homelite UT43122B electric chainsaw. It’s a good choice for occasional use and can handle pretty much any cutting job that’s likely to pop up around the yard.
Who makes Homelite?
John Deere acquired the brand in 1994. Techtronic Industries acquired Homelite from John Deere in 2001.
Do you start a chainsaw with the brake on or off?
The chain brake should be activated when you start the chainsaw. Many chainsaw models can be started in what is known as ‘half-throttle’ position. In this position, the chain can rotate – if the chain brake is not activated.
How long to wait if chainsaw is flooded?
Many people wonder if a flooded chainsaw will fix itself? The answer is yes, but not always. By letting the chainsaw sit for about 20 minutes it will allow some of the fuel inside the engine to evaporate.
Can you start a chainsaw without bar oil?
Running a chainsaw without bar oil will cause mechanical problems, and some serious safety issues, such as: Kickback. Chain failure. Dulls the chain.
Can you use motor oil for chainsaw?
While motor oil is not the best substitute for chainsaw bar oil, it will work as a temporary measure if find you have no other option. The downside of motor oil is that it’s not sticky enough to stay on the bar and chain. So, when you’re using the chainsaw, the motor oil will fling off as you cut and make quite a mess.
Do they still make Homelite?
Do they still make Homelite chainsaws? Yes, Techtronic Industries acquired rights to the Homelite brand from John Deere in 2001 and has continued producing light duty electric chainsaw models for the home consumer market.
Why is my Homelite chainsaw smoking?
If your Homelite chain saw starts to produce smoke or won’t start up again right after being used, it may be overheating. When the motor is too hot, it can become permanently damaged, and if the bar and chain get too hot, the chain can come off, creating a dangerous situation.
What are the L and H screws on chainsaw?
The letters on the screws represent High (H), Low (L) and Idle (T). The H screw regulates the Air/Fuel mix during high RPMs, while the L Screw does the same during low RPMs.
How do you adjust the carburetor on a Homelite 330 chainsaw?
1. Adjust the low-speed adjustment screw on the left and high-speed adjustment screw on the right with a screwdriver. Turn the low-speed screw clockwise until you feel the needle touch the seat. Turn the low-speed screw back counterclockwise one and one-third turns.
How many cc’s is a Homelite Super XL?
The engine in the Homelite XL Chain Saw displaces 58.2 cc and has one cylinder. The bore is 1.8 inches and the stroke is 1.4 inches.