Saw chain is not designed to cut, it is designed to remove material, one chip at a time. Depending on the length of the chain for a certain size bar, there will either be an equal number of alternating left hand and right hand cutters, or the chain will end with 2 back to back same-side cutters. Following up from what I said at the beginning, it wasn’t until I took the time to really learn about chain and how and why it works, that I was really able to service, maintain, and sharpen chains.
Chainsaw chains are one of the most important parts of the whole chainsaw. Without them you certainly wouldn’t be able to cut through wood. Confusingly they come in almost limitless combinations of type, size and features, all geared to different applications.
A good chainsaw can be helpful in a wide variety of activities, from landscaping trees and foliage to cutting life-saving firebreaks in heavily wooded areas to ice sculpting during the winter! It is extremely important to practice extreme caution when handling a chainsaw for any type of activity, as while in operation, the blade of the saw is strong enough to cut through human skin, muscle, and bone. How exactly a chainsaw works is through the use of the aforementioned parts being powered in tandem to create enough friction to slice through a tougher material with ease. Now that you are informed of what a chainsaw actually is, how each individual part works, and what, if any, maintenance may be required of a chainsaw owner; it may be easier to determine what chainsaw would be the best for you to purchase.
The clue is in the name! A chainsaw has two main parts: a saw blade built into a chain, wrapped around a long metal guide bar, and a small, one-cylinder gasoline engine. Chainsaw helmets with visors offer some protection; so too do chainsaw uniforms. Wayne’s Chainsaw Museum: A short video tour of Wayne Sutton’s chainsaw museum in the United States, will hundreds of saws dating from about the 1930s.
how chainsaw chain works Related Question:
What part of a chainsaw chain does the cutting?
The cutter is the part of the saw chain that does the cutting. The saw chain has left- and right-hand cutters so that the saw chain will cut evenly through the wood.
What turns the chain on a chainsaw?
The clutch is attached to the crankshaft, and engages the chain to start rotating once a certain rotational speed is reached. The clutch allows the engine to run without always rotating the chain. When the engine is revved up, the clutch engages the sprocket and forces the chain to turn.
How does a chain saw tooth cut?
IF: the chain is properly tensioned, the teeth are sharp, and the rakers are properly adjusted, THEN: as the chain spins round and round the bar, with each pass, each tooth will remove one wood chip. This is happening so fast that indeed it does appear to “slice” through the wood.
Is there a difference in chainsaw chains?
There are many chainsaw chain differences across the board, and there are no universal chainsaw chains. The ‘pitch’ and ‘gauge’, and also to some degree the length of the bar, are determined by your chainsaw. You can’t choose these aspects of a chain saw chain.
What causes a chainsaw bar to bend?
A saw that has had one side of the chain nicked on a rock or dulled in the dirt will cut in a circle. A chain that has been sharpened differently on one side of the chain than the other will cut in a circle. A bent bar might cut crooked or straight, but, it will get hung up in the kerf.
Should a chainsaw chain moves at idle?
The most probable – and easiest to fix – cause of chain rotation while the chainsaw engine idles is a poorly adjusted idle setting on the carburetor. The result is that too much fuel is delivered to the combustion chamber when the throttle is released, and the engine doesn’t really slow.
Why does my chainsaw chain get dull so fast?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
What chainsaw chain cuts the fastest?
A full chisel chain is a chain with square cornered teeth, and they’re known for being the fastest cutting blade shape available. A full chisel chain also has a higher number of teeth than other chain options(full chisel is also known as a standard chisel chain).
What makes a chainsaw chain more aggressive?
An aggressive chainsaw chain is one that has a higher cutting speed than other chains, and usually has full chisel teeth on a full or skip chain. Experts say the chainsaw brand that makes the best aggressive chains is Stihl, with Husqvarna and Oregon a close second.
When should I replace chainsaw chain?
Once the wear markers have been met it’s essential to replace the chainsaw chain. Filing past the wear marker will greatly reduce the chain’s cutting performance, and increases the risk of the tooth breaking off. Ideally you should reach the tooth and depth gauge markers at roughly about the same time.
How often should you flip the bar on a chainsaw?
Some professional loggers would advocate that you should flip your chainsaw bar at the end of every use, particularly when you are cleaning up. Others suggest a more relaxed approach advising that you flip the chainsaw bar only when you are changing your chainsaw blade.
Can you drill holes in chainsaw bar?
Re: Drilling a Chainsaw Bar Drilling that bar may not be as difficult as you think. It will be best if you use a drill press, start with a pilot hole, and then drill to the size you need. Make sure you have a sharp bit, run at the lowest speed you can, and use cutting fluid.
Why is my chainsaw chain not tightening?
If you’re having trouble tightening the chainsaw chain, it may be adjusted properly already. Check the tension on the chain by grasping it in the middle of the top of the guide bar and giving it a quick snap. The chain should quickly snap back into place with no sagging on the underside of the guide bar.
Can a chainsaw without a chain hurt you?
Can You Run a Chainsaw without the Chain? You can run a chainsaw without a chain but try to do that just for a few minutes. I wouldn’t advise you to run a chainsaw without a chain for more than a few minutes. If you are not careful, you can overheat the engine and increase the wear and tear.
How many times can a chainsaw chain be sharpened?
Cutters can be sharpened up to 10 times or more before the chain needs replacing. If your cutters are worn unevenly after a few sharpenings, a professional can regrind them to uniform shape. If you use the same chain for a few years, then buy a new one, the new one won’t mesh smoothly with the sprocket and bar.